Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Braeburn 7 Day, 5-2 Day Programmable Touchscreen Hybrid Thermostat, Model 6300. This thermostat is designed to provide reliable and efficient control over your heating and cooling system, supporting multi-stage heat pump systems (4 Heat/2 Cool).
Key Features
- 7 Day, 5-2 Day, or Non-Programmable Modes
- Large 12 sq. in. Easy-Read Touchscreen Display with Bright Blue Backlight
- Automatic or Manual Changeover between Heating and Cooling
- Exclusive SpeedBar Technology for quick adjustments
- Residential or Commercial Operation Modes
- Adjustable Temperature Limits
- Support for Indoor or Outdoor Remote Sensing
- SpeedSet Programming Mode
- User Selectable Service Monitors
- Separate User and Installer Reset Buttons
- Auxiliary Heat Fossil Fuel Option
- Power Options: Hardwire (24V) or Battery Powered
- Multi-Level Keypad Lockout for security
- Economizer Control and Circulating Fan Mode
- Programmable Fan Mode
- Meets California Title 24 Guidelines
- ZigBee Connectivity Protocol
Setup
1. Installation
Installation of this thermostat involves working with 24-volt wiring. It is recommended that installation be performed by a qualified HVAC technician to ensure proper wiring and system compatibility. Refer to the detailed wiring diagrams provided with the product packaging for specific connections.
2. Initial Power-Up
Once installed and powered, the thermostat will typically prompt you to set the date and time. Follow the on-screen instructions.
3. Setting Date and Time
- Press the DAY/TIME button on the touchscreen.
- Use the up/down arrow buttons on the right side of the thermostat to adjust the current day, hour, and minute.
- Confirm your selections to save the settings.
Operating Instructions
Understanding the Display and Controls
Image: Front view of the Braeburn 6300 Thermostat, showing the touchscreen display with current room temperature (70), set temperature (70), time (12:00 PM), and various control buttons like SYSTEM, FAN, PROG, HOLD, CLEAN, CONFIG, HUMIDITY, OUTDOOR, and DAY/TIME. Up/down arrows are visible on the right side for temperature adjustment.
The large touchscreen display shows the current room temperature, the set temperature, time, and day. Various buttons around the display allow you to control the thermostat's functions.
System Modes
Press the SYSTEM button to cycle through the available operating modes:
- HEAT: The system will operate to maintain the set heating temperature.
- COOL: The system will operate to maintain the set cooling temperature.
- AUTO: The thermostat automatically switches between heating and cooling to maintain the desired temperature range.
- OFF: The heating and cooling system is turned off.
Fan Modes
Press the FAN button to select the fan operation mode:
- AUTO: The fan runs only when the heating or cooling system is actively operating.
- ON: The fan runs continuously, regardless of whether the heating or cooling system is active.
Adjusting Temperature
Use the up (^) and down (v) arrow buttons on the right side of the thermostat to increase or decrease the desired set temperature.
Programming Schedules
The thermostat supports 7-day or 5-2 day programming. To set or modify a program:
- Press the PROG button.
- Follow the on-screen prompts to select the day(s) and time periods (e.g., Wake, Leave, Return, Sleep).
- Adjust the desired temperature for each period using the up/down arrow buttons.
- Save your program settings.
Hold Function
Press the HOLD button to temporarily override the current program schedule and maintain the current set temperature indefinitely. To cancel the hold, press HOLD again or adjust the system mode.
Special Functions
- CLEAN: Activates a screen cleaning mode, temporarily disabling touch input.
- CONFIG: Accesses installer and user configuration settings. Refer to the full installer manual for advanced settings.
- HUMIDITY: If an optional humidity sensor is connected, this button may display current humidity levels. This thermostat does not directly control humidity.
- OUTDOOR: If an optional outdoor sensor is connected, this button may display the outdoor temperature.
Maintenance
Battery Replacement
If the thermostat is battery-powered or uses batteries for backup, a low battery indicator will appear on the display. Replace batteries promptly to ensure continuous operation. Typically, AA alkaline batteries are used.
Cleaning the Thermostat
To clean the touchscreen, press the CLEAN button to temporarily disable touch input. Use a soft, damp cloth to gently wipe the screen. Do not use abrasive cleaners or spray liquids directly onto the thermostat.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Thermostat display is blank. | No power, dead batteries, or blown fuse. | Check batteries and replace if necessary. Verify power to the HVAC system. Check circuit breaker. |
| System not heating/cooling. | Incorrect system mode, fan setting, or program. | Ensure thermostat is in HEAT or COOL mode. Check fan setting. Review program schedule. |
| Temperature inaccurate. | Thermostat location, sensor issue. | Ensure thermostat is not exposed to direct sunlight or drafts. Consult installer for sensor calibration. |
| Thermostat not responding to touch. | Screen cleaning mode active, or temporary software issue. | If CLEAN mode is active, wait for it to expire or press CLEAN again. Try a soft reset (remove batteries for 30 seconds). |
Specifications
| Feature | Detail |
|---|---|
| Model Number | 6300 |
| Brand | Braeburn |
| Programmability | 7 Day, 5-2 Day, or Non-Programmable |
| System Compatibility | Multi-Stage (Heat/Cool) Heat Pump (4 Heat/2 Cool) |
| User Interface | Touchscreen with Button Control |
| Power Source | 24 Volts (Hardwired) or Battery Powered |
| Display Type | Digital, Backlit Blue |
| Connectivity Protocol | ZigBee |
| Mounting | Horizontal |
| Special Features | Auto Changeover, Programmable, Adjustable Temperature Limits, Keypad Lockout |
| UPC | 384929211786 |
| Compliance | UL Listed, Meets California Title 24 Guidelines |
Warranty Information
This Braeburn thermostat comes with a 5-year limited warranty from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty covers defects in materials and workmanship under normal use and service. For full warranty terms and conditions, please refer to the documentation included with your product or contact Braeburn customer support.
Customer Support
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Braeburn customer support. Contact information can typically be found on the manufacturer's website or in the product packaging.
