1. Introduction
The EPOMAKER EP64 is a versatile 60% mechanical keyboard designed for both gaming and productivity. It offers multiple connectivity options, customizable features, and a durable build. This manual provides detailed instructions for setting up, operating, and maintaining your EP64 keyboard.
Figure 1: EPOMAKER EP64 Mechanical Keyboard Overview
2. What's in the Box
Upon unboxing your EPOMAKER EP64 keyboard, please ensure all the following items are present:
- EPOMAKER EP64 Mechanical Keyboard
- USB Cable
- Keycap Puller
- Switch Puller
- User Manual (this document)
Figure 2: Package Contents
3. Specifications
| Feature | Description |
|---|---|
| Model | EP64 |
| Layout | 60% (64 Keys) |
| Dimensions | 11.42 x 4.06 x 1.61 inches |
| Weight | 1.92 pounds |
| Connectivity | Bluetooth 5.0, 2.4GHz Wireless, USB-C Wired |
| Switches | Hot-swappable (5-pin/3-pin mechanical switches) |
| Keycaps | Dye-sub PBT, Cherry Profile |
| Backlight | RGB Effects |
| N-Key Rollover (NKRO) | Supported |
| Compatible Devices | Laptop, PC, Tablet (Mac/Win) |
| Material | Polybutylene Terephthalate |
4. Setup
4.1 Connectivity Modes
The EPOMAKER EP64 supports three modes of connection: Bluetooth 5.0, 2.4GHz Wireless, and USB-C Wired. You can easily switch between modes using the function keys.
Figure 3: Three Modes of Connection
- USB-C Wired Mode: Connect the keyboard to your device using the provided USB-C cable. The mode can be activated by pressing Fn + 5.
- 2.4GHz Wireless Mode: Plug the 2.4GHz receiver (usually found in a magnetic slot on the keyboard's underside) into your device. Activate this mode by pressing Fn + 4. The polling rate can reach up to 1000Hz in this mode.
- Bluetooth 5.0 Mode: The keyboard supports up to three Bluetooth connections. Press Fn + 1, Fn + 2, or Fn + 3 to select a Bluetooth channel. The corresponding key will flash when pairing.
Figure 4: Keyboard Ports and Switches
5. Operating Instructions
5.1 Key Functions and RGB Effects
The EP64 keyboard features various default RGB effects and programmable options. Use the Fn key in combination with other keys to access secondary functions and control RGB lighting.
Figure 5: RGB Effects and FN Shortcuts
- Turn On/Off Backlights: Fn + ENTER
- Toggle RGB Effects: Fn + I/O/P
- Change Backlight Colors: Fn + "'
- Backlight Brightness +/-: Fn + <, / Fn + >.
- Backlight Speed +/-: Fn + [{ / Fn + ]}
- Reset the Keyboard: Fn + SPACE (Hold for 3 seconds)
5.2 Hot-Swappable Switches
The EP64 features a 5-pin/3-pin hot-swappable PCB, allowing you to easily change mechanical switches without soldering. This provides flexibility for customizing the typing feel.
Figure 6: Hot-Swappable PCB
5.3 N-Key Rollover (NKRO)
The keyboard supports N-Key Rollover, ensuring that every key press is registered accurately, even when multiple keys are pressed simultaneously. This is crucial for fast typing and gaming.
Figure 7: N-Key Rollover Illustration
5.4 Battery Check
You can check the keyboard's battery level by pressing Fn + Backspace. The corresponding number keys will light up to indicate the charge percentage.
Figure 8: Battery Level Indicator
5.5 Typing Test Video
Watch this official typing test video to hear the sound profile of the EPOMAKER EP64 keyboard.
Video 1: EPOMAKER EP64 Keyboard Typing Test (Source: EPOMAKER)
6. Maintenance
6.1 Cleaning the Keyboard
To maintain the longevity and appearance of your EPOMAKER EP64 keyboard, regular cleaning is recommended. The PBT keycaps are designed to resist shine, wear, and oils.
- General Cleaning: Use a soft, lint-free cloth slightly dampened with water or a mild cleaning solution to wipe down the keycaps and keyboard frame.
- Deep Cleaning: For deeper cleaning, use the provided keycap puller to remove keycaps. You can then clean the switches and plate with compressed air or a small brush.
- Water Resistance: While the keyboard features a water-resistant mainboard, it is not fully waterproof. Avoid submerging the keyboard in liquids. If spills occur, immediately disconnect the keyboard, dry it thoroughly, and allow it to air out before reconnecting.
7. Troubleshooting
If you encounter any issues with your EPOMAKER EP64 keyboard, please refer to the following common troubleshooting steps:
- Keyboard not responding: Ensure the USB cable is securely connected or the 2.4GHz receiver is properly inserted. For Bluetooth, ensure it's paired correctly and the battery is charged. Try resetting the keyboard (Fn + SPACE for 3 seconds).
- Keys not registering: Check if the keyboard is in the correct operating mode. If using wireless, ensure sufficient battery. For hot-swappable switches, ensure they are fully seated in the PCB.
- RGB lights not working: Ensure the keyboard is powered on. Try cycling through RGB effects (Fn + I/O/P) or adjusting brightness (Fn + <, / Fn + >.).
- Connectivity issues: For 2.4GHz, try a different USB port. For Bluetooth, unpair and re-pair the device. Ensure no strong interference sources are nearby.
If the problem persists after trying these steps, please contact EPOMAKER customer support for further assistance.
8. Warranty and Support
EPOMAKER products are covered by a limited warranty. For detailed information regarding warranty terms, conditions, and support options, please visit the official EPOMAKER website or contact their customer service team.
EPOMAKER Official Website: www.epomaker.com
Customer Support Email: support@epomaker.com