Introduction
This manual provides instructions for the XVEFAT HTR-A18M TV Remote Control. This remote is designed as a direct replacement for various Haier LCD LED TV models and requires no programming or pairing. Simply install batteries, and it is ready for use.
Setup
1. Battery Installation
- Locate the battery compartment on the back of the remote control.
- Slide the battery compartment cover downwards or press the latch and lift to open.
- Insert two (2) 1.5V AAA alkaline batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Replace the battery compartment cover, ensuring it clicks securely into place.
Image: Back of the remote control with the battery compartment open, illustrating where to insert batteries.
2. Initial Use
Once batteries are installed, the remote control is ready for immediate use. No programming or pairing with your Haier TV is required.
Operating Instructions
Point the remote control directly at the infrared sensor on your Haier TV. Ensure there are no obstructions between the remote and the TV.
Image: Front view of the HTR-A18M remote control, displaying all functional buttons.
Button Functions:
- POWER (●): Turns the TV on or off.
- INPUT: Selects video input sources (HDMI, AV, Component, etc.).
- USB: Accesses USB media playback.
- CC (Closed Caption): Toggles closed captions on or off.
- HOME (⌂): Returns to the TV's home screen or smart TV menu.
- 0-9 (Number Buttons): Directly selects TV channels.
- . (Dash): Used for entering sub-channels (e.g., 7.1).
- RECALL: Switches between the current and previously viewed channel.
- MUTE: Mutes or unmutes the TV audio.
- VOL (+/-): Adjusts the volume level.
- CH (+/-): Changes TV channels up or down.
- MENU: Opens the TV's main menu.
- DISPLAY: Shows current channel information or TV status.
- EXIT: Closes on-screen menus or returns to the previous screen.
- BACK: Navigates back in menus or web pages.
- SAP (Secondary Audio Program): Selects alternative audio tracks.
- SLEEP: Sets the TV's sleep timer.
- WIDE: Adjusts the screen aspect ratio.
- AUDIO: Selects audio modes or settings.
- PICTURE: Selects picture modes or settings.
- Navigation Buttons (Up, Down, Left, Right, OK): Navigates through menus and confirms selections.
- CH.LIST (Channel List): Displays the list of available channels.
- FAVORITE: Accesses favorite channels list.
- Color Buttons (Red, Green, Yellow, Blue): Functions vary depending on the TV menu or application.
- Media Control Buttons (Play/Pause, Stop, Rewind, Fast Forward, Previous, Next): Controls media playback (e.g., USB, streaming apps).
Maintenance
Battery Replacement:
Replace batteries when the remote control's response becomes sluggish or stops functioning. Always replace both batteries simultaneously with new 1.5V AAA alkaline batteries. Do not mix old and new batteries, or different types of batteries.
Cleaning:
To clean the remote control, wipe it with a soft, dry cloth. Do not use liquid cleaners, sprays, or abrasive materials, as these may damage the remote's surface or internal components.
Troubleshooting
- Remote not responding:
- Ensure the remote has fresh 1.5V AAA alkaline batteries installed correctly.
- Check for any obstructions between the remote control and the TV's infrared sensor.
- Verify that you are pointing the remote directly at the TV's sensor.
- If the issue persists, try removing and reinserting the batteries to reset the remote.
- Specific buttons not working:
- This remote is a direct replacement and does not require programming. If certain buttons do not function, ensure your TV model is listed as compatible.
- Clean the remote's surface, especially around the non-functioning buttons, to remove any debris that might be preventing proper contact.
Specifications
| Feature | Detail |
|---|---|
| Model | HTR-A18M |
| Brand | XVEFAT |
| Compatible Devices | Haier LCD LED Televisions (Specific models listed in header) |
| Connectivity Technology | Infrared (IR) |
| Controller Type | Button Control |
| Power Supply | 2 x 1.5V AAA Alkaline Batteries |
| Special Feature | Ergonomic design, No programming required |
Warranty and Support
This product is a replacement remote control. For specific warranty information, please refer to the retailer or manufacturer at the point of purchase. No additional warranty information is provided with this manual.
For support regarding the functionality of this remote control, please contact the seller or refer to your Haier TV's original user manual for TV-specific settings and features.
