1. Introduction
Thank you for purchasing the AQUA AQW-G50GJ-W 5.0kg Fully Automatic Washing Machine. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your appliance. Please read it thoroughly before use and keep it for future reference.
2. Safety Information
To reduce the risk of fire, electric shock, or injury when using your washing machine, follow these basic precautions:
- Read all instructions before using the appliance.
- Ensure the washing machine is properly grounded. Do not operate with a damaged power cord or plug.
- Do not wash articles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry-cleaning solvents, or other flammable or explosive substances.
- Do not allow children to play on or in the appliance. Close supervision is necessary when the appliance is used near children.
- Do not reach into the appliance if the tub or agitator is moving.
- Do not install or store this appliance where it will be exposed to the weather or freezing temperatures.
- Always disconnect the appliance from the power supply before attempting any service or cleaning.
3. Setup
Proper installation is crucial for the performance and longevity of your washing machine.
3.1 Unpacking
Carefully remove all packaging materials, including the base packaging and any internal packing foam or tape. Retain packaging for transport if needed.
3.2 Location Requirements
Place the washing machine on a firm, level surface. Avoid direct sunlight, excessive moisture, or areas where temperatures may drop below freezing. Ensure there is adequate space around the machine for ventilation and maintenance.
3.3 Connecting Water Hoses
Connect the water inlet hose(s) to the corresponding water tap(s) and to the inlet valve(s) on the back of the washing machine. Tighten all connections securely to prevent leaks. For this model, typically only a cold water connection is required.
3.4 Connecting Drain Hose
Securely attach the drain hose to a standpipe or laundry tub. Ensure the hose is not kinked or blocked and that its end is positioned at the correct height to allow proper drainage without siphoning.
3.5 Power Connection
Plug the power cord into a grounded electrical outlet. Do not use extension cords or adapters.
3.6 Leveling the Machine
Adjust the leveling feet at the bottom of the machine until it is perfectly level and stable. This prevents excessive vibration and noise during operation.

Image 1: Front view of the AQUA AQW-G50GJ-W 5.0kg Fully Automatic Washing Machine, showing the control panel and top-load lid. This image illustrates the general appearance and layout of the appliance after setup.
4. Operating Instructions
Follow these steps for a typical wash cycle.
4.1 Loading Laundry
Open the lid and load clothes loosely into the tub. Do not overload the machine; ensure clothes are distributed evenly around the agitator for balanced spinning.
4.2 Adding Detergent and Softener
Add the appropriate amount of detergent to the detergent dispenser. If using fabric softener, add it to the designated softener compartment. Refer to detergent packaging for recommended amounts.
4.3 Selecting a Wash Program
Press the 'Power' button to turn on the machine. Use the 'Program Select' button or dial to choose the desired wash program (e.g., Normal, Delicate, Quick Wash). Adjust water level or other options if available and needed.
4.4 Starting a Wash Cycle
Close the lid and press the 'Start/Pause' button to begin the wash cycle. The machine will automatically fill with water, wash, rinse, and spin.
4.5 Pausing or Stopping a Cycle
To pause a cycle, press the 'Start/Pause' button. To stop and cancel a cycle, press and hold the 'Power' button for a few seconds.
4.6 End of Cycle
Once the cycle is complete, the machine will signal. Open the lid and remove your laundry promptly to prevent wrinkles and odors.
5. Maintenance
Regular maintenance ensures optimal performance and extends the life of your washing machine.
5.1 Cleaning the Lint Filter
Locate the lint filter (usually inside the tub or on the agitator). Remove it, clean out any accumulated lint and debris, and reinsert it securely after every few washes.
5.2 Cleaning the Detergent Dispenser
Periodically remove and clean the detergent and softener dispensers to prevent residue buildup. Rinse with warm water and dry before reinserting.
5.3 Cleaning the Tub
Use a washing machine cleaner or run a 'Tub Clean' cycle (if available) with hot water and a cup of white vinegar or baking soda once a month to remove detergent residue and odors.
5.4 Exterior Cleaning
Wipe the exterior of the machine with a soft, damp cloth. Do not use abrasive cleaners or solvents.
5.5 After Each Wash
Leave the lid slightly ajar after each wash to allow the tub to air dry and prevent mildew growth.
6. Troubleshooting
Before calling for service, check the following common issues:
- Machine does not start: Ensure the power cord is plugged in, the lid is closed, and the 'Power' button has been pressed. Check your household circuit breaker.
- No water fill: Check that water taps are fully open and water inlet hoses are not kinked. Ensure household water supply is active.
- Water does not drain: Check if the drain hose is kinked or blocked. Clean the lint filter for any obstructions.
- Excessive vibration/noise: Ensure the machine is level and all four feet are firmly on the floor. Redistribute the laundry load evenly in the tub.
- Error codes: If an error code appears on the display, consult the specific error code section of the full product manual or contact customer support for guidance.
7. Specifications
| Brand | AQUA |
| Model | AQW-G50GJ-W |
| Type | Fully Automatic Top-Load Washing Machine |
| Washing Capacity | 5.0 kg |
| Power Supply | AC 100V, 50/60Hz |
| Approximate Dimensions (W x D x H) | 525mm x 500mm x 890mm |
| Approximate Weight | 26 kg |
8. Warranty and Support
Warranty information for your AQUA AQW-G50GJ-W washing machine is typically provided with your purchase documentation. Please refer to the warranty card or contact your retailer for details regarding warranty coverage and service. For technical support or inquiries, please contact AQUA customer service or visit their official website.





