LORYERGO TV Tray Table (Model LETT01B) User Manual

Introduction

Thank you for choosing the LORYERGO TV Tray Table. This manual provides detailed instructions to ensure proper assembly, safe operation, and effective maintenance of your new table. Please read this manual thoroughly before use and retain it for future reference.

The LORYERGO TV Tray Table is designed for versatile use, functioning as a TV dinner tray, a portable workstation, or a study table. It features adjustable height and tilt angles, a convenient cup holder, and a stable, foldable design for easy storage.

Safety Information

Please observe the following safety precautions:

• Do not overload the table. Ensure items are placed centrally to maintain stability.
• Always ensure all locking mechanisms are securely engaged after adjusting height or tilt.
• Keep fingers clear of moving parts during assembly and adjustment to prevent pinching.
• Do not use the table as a step stool or for standing.
• Keep away from open flames or excessive heat sources.
• Supervise children when they are using the table.

Package Contents

Verify that all components are present before beginning assembly:

• Tabletop with integrated cup holder
• Leg frames (2 pieces)
• Stabilizing crossbar
• Instruction Manual
• Hardware (screws)
• Allen Key Tool

Setup and Assembly

Assembly is straightforward and requires no additional tools beyond the included Allen key. Follow these steps:

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, flat surface.
2. Attach Leg Frames: Insert the upper parts of the leg frames into the designated slots on the underside of the tabletop. Ensure they click securely into place.
3. Install Stabilizing Crossbar: Position the stabilizing crossbar between the lower sections of the leg frames. Align the holes and secure it using the provided screws and Allen key. This crossbar enhances stability. Note: For flat storage, this crossbar must be removed.
4. Verify Stability: Once assembled, gently test the table's stability before placing any items on it.

Figure 1: Installation of the stabilizing crossbar for enhanced table stability.

Operating Instructions

Adjusting Height

The LORYERGO TV Tray Table offers 6 height settings, ranging from 20.4 inches to 28 inches. To adjust the height:

1. Locate the height adjustment pins on each leg.
2. Press the pins inward and slide the leg sections up or down to your desired height.
3. Ensure both pins fully engage in the corresponding holes at the chosen height setting before use.

Figure 2: Demonstrating the adjustable height feature of the table.

Adjusting Tilt Angle

The tabletop can be adjusted to 3 different tilt angles: horizontal, 30° upward tilt, and 23° downward tilt. To change the tilt:

1. Lift the front edge of the tabletop slightly.
2. Adjust the support mechanism underneath the tabletop to the desired angle.
3. Ensure the mechanism locks securely into place before resting items on the table.

Figure 3: The table's tilt mechanism allows for various working or dining positions.

Using the Cup Holder

The integrated cup holder is designed to accommodate standard cup sizes and can be retracted when not in use.

• To extend: Gently pull the cup holder outward from beneath the tabletop.
• To retract: Push the cup holder inward until it is flush with the underside of the tabletop.

Figure 4: The cup holder can be extended for use or retracted for storage.

Folding for Storage

The table can be folded flat for convenient storage under a bed or sofa.

1. Remove Crossbar: If installed, use the Allen key to remove the stabilizing crossbar from between the leg frames.
2. Collapse Legs: Press the height adjustment pins and fully collapse the legs to their lowest setting.
3. Fold Tabletop: The legs will then fold inward, allowing the table to collapse flat.

Figure 5: The table folds compactly for easy storage in small spaces.

Maintenance and Care

To ensure the longevity and appearance of your LORYERGO TV Tray Table, follow these simple maintenance guidelines:

• Cleaning: The table surface is smooth and easy to clean. Wipe with a damp cloth and mild detergent if necessary. Avoid abrasive cleaners or harsh chemicals.
• Inspection: Periodically check all screws and connections to ensure they are tight. Retighten with the Allen key if any looseness is detected.
• Storage: When not in use, store the table in a dry environment to prevent rust or damage to components.

Troubleshooting

If you encounter any issues with your LORYERGO TV Tray Table, refer to the following common solutions:

• Table feels wobbly:
  • Ensure the stabilizing crossbar is correctly installed and all screws are tightened.
  • Verify that both height adjustment pins are fully engaged at the same height setting on both legs.
  • Check that the tabletop tilt mechanism is securely locked.
• Difficulty adjusting height or tilt:
  • Ensure no weight is on the table when attempting to adjust.
  • Check for any obstructions in the adjustment mechanisms.
  • Apply gentle, even pressure when adjusting.
• Table does not fold flat:
  • The stabilizing crossbar must be removed before the table can fold completely flat.
  • Ensure the legs are fully collapsed to their lowest height setting.

Specifications

Figure 6: Key dimensions of the LORYERGO TV Tray Table.

Warranty and Support

Warranty Information

LORYERGO products are manufactured to high-quality standards. Specific warranty details, including coverage period and terms, are typically provided with your purchase documentation or can be found on the official LORYERGO website. Please retain your proof of purchase for warranty claims.

Customer Support

For further assistance, missing parts, or to report any issues not covered in this manual, please contact LORYERGO customer support. You can usually find contact information on the product packaging or by visiting the official LORYERGO website:

Visit the LORYERGO Store on Amazon

When contacting support, please have your product model number (LETT01B) and purchase details ready.