G Keni LC-10W Elegant CD Player Alarm Clock Radio User Manual

1. Introduction

Thank you for purchasing the G Keni LC-10W Elegant CD Player Alarm Clock Radio. This versatile device combines multiple audio playback options with convenient alarm clock features and wireless charging capabilities. Please read this manual thoroughly to ensure proper use and to maximize your enjoyment of the product.

2. Safety Information

• Do not expose the unit to rain, moisture, or extreme temperatures.
• Ensure the power cord is UL certified and connected to a compatible 100V-240V AC outlet.
• Avoid placing the unit near heat sources or in direct sunlight.
• Do not disassemble or attempt to repair the unit yourself. Contact qualified service personnel.
• Keep the unit away from strong magnetic fields.
• Use only the specified 2*AAA dry batteries for time setting memory backup (not included).

3. Package Contents

• 1x G Keni LC-10W CD Player Alarm Clock Radio
• 1x AC Power Cord
• 1x Remote Control
• 1x Owner's Manual

4. Product Overview

The G Keni LC-10W features a sleek design with a large mirror LED display and intuitive controls. It integrates a top-loading CD player, FM radio, Bluetooth connectivity, USB and AUX inputs, and a wireless charging pad.

Figure 1: Front view of the G Keni LC-10W unit, showcasing the digital display, wireless charging pad with a phone, and the included remote control.

4.1. Controls and Ports

• Top Panel: Mode button, Play/Pause, Skip/Search buttons, Program button, Snooze/Sleep button, Volume/Tune knob, Alarm 1/2 buttons, Dimmer, Wireless Charging On/Off.
• Front Panel: Large Dimmable Mirror LED Display.
• Side Panel: USB port, AUX-IN port, Headphone output.
• Rear Panel: FM Antenna, AC Power Input.

Figure 2: Diagram illustrating the various playback modes supported by the G Keni LC-10W, including CD, Bluetooth, FM Radio, USB, AUX, and headphone output.

5. Setup

5.1. Power Connection

1. Connect the supplied AC power cord to the AC IN jack on the rear of the unit.
2. Plug the other end of the power cord into a standard wall outlet (100V-240V AC).
3. The unit will power on and the display will light up.

5.2. Battery Backup (Optional)

For time setting memory backup during power outages, install 2*AAA dry batteries (not included) into the battery compartment on the bottom of the unit. This will retain time and alarm settings.

6. Operating Instructions

6.1. Time Setting

1. Ensure the unit is in standby mode (display showing time only). If not, press and hold the Power/Mode button until only the time is displayed.
2. Press and hold the SET button until the time digits start blinking.
3. Press the Forward or Rewind buttons to switch between 12-hour and 24-hour format.
4. Press SET again to set the hour. Use Forward or Rewind to adjust the hour (pay attention to AM/PM in 12-hour format).
5. Press SET again to set the minute. Use Forward or Rewind to adjust the minute.
6. Press SET one last time to confirm and save the time.

6.2. Alarm Clock Setting

The unit supports dual alarms (Alarm 1 and Alarm 2) with adjustable volume and various wake-up sounds.

1. Press and hold either Alarm 1 or Alarm 2 button until the hour digits start blinking.
2. Use the Forward or Rewind buttons to adjust the desired alarm hour.
3. Press the respective Alarm button again to set the minute. Use Forward or Rewind to adjust the minute.
4. Press the Alarm button again to select the wake-up sound: Buzzer, Radio, CD, USB, or Bluetooth. Use Forward or Rewind to cycle through options.
5. Press the Alarm button again to set the alarm volume (indicated by 'U' followed by a number). Use Volume +/- buttons to adjust.
6. Press the Alarm button one last time to confirm and activate the alarm. An alarm icon will appear on the display.
7. To deactivate an alarm, press the corresponding Alarm button once. The alarm icon will disappear.

6.3. CD Player Operation

The top-loading CD player supports audio CDs, CD-Rs, CD-RWs, and MP3 CDs.

1. Press the OPEN button on the top right to open the CD compartment.
2. Carefully place a CD onto the spindle with the label side facing up.
3. Close the CD compartment lid.
4. Press the MODE button until 'CD' appears on the display.
5. The CD will begin playing automatically. Use Play/Pause, Skip/Search buttons to control playback.
6. Programming Function: In CD mode, press the PROG button to enter programming mode. Use Skip/Search to select tracks and PROG to add them to the playlist. Press Play to start the programmed sequence.

Figure 3: The top-loading CD player of the G Keni LC-10W is shown open, with a CD being placed inside. The remote control is also visible, highlighting ease of operation.

6.4. FM Radio Operation

The unit features a digital FM radio (87.5-108MHz). AM radio is not supported.

1. Extend the telescopic FM antenna on the rear of the unit for optimal reception.
2. Press the MODE button until 'FM' appears on the display.
3. Auto-Scan: Press and hold the Play/Pause button to automatically scan and save available FM stations.
4. Manual Tuning: Short press the Skip/Search buttons to manually tune to the next available station.
5. Mute: Press the Mute button to temporarily silence the radio.

Figure 4: The G Keni LC-10W displaying FM Radio mode, indicating the frequency and the availability of a sleep timer function.

6.5. Bluetooth Connectivity

Stream audio wirelessly from your Bluetooth-enabled devices.

1. Press the MODE button until 'BT' appears on the display. The unit will enter pairing mode, indicated by a blinking Bluetooth icon.
2. On your mobile device, enable Bluetooth and search for available devices.
3. Select 'LC-10W' from the list to pair. Once connected, the Bluetooth icon will stop blinking.
4. You can now play music from your device through the G Keni LC-10W. Use the unit's controls or your device to manage playback.

Figure 5: A smartphone is shown wirelessly connected to the G Keni LC-10W via Bluetooth, demonstrating music streaming capabilities.

6.6. USB Music Playback

Play MP3/WMA music files directly from a USB flash drive.

1. Insert a USB flash drive into the USB port on the side of the unit.
2. Press the MODE button until 'USB' appears on the display.
3. The unit will automatically detect and begin playing music from the USB drive.
4. Use Play/Pause, Skip/Search buttons to control playback.

6.7. AUX-IN Connection

Connect external audio devices using a 3.5mm audio cable (not included).

1. Connect one end of a 3.5mm audio cable to the AUX-IN port on the side of the unit.
2. Connect the other end to the headphone jack or AUX-OUT port of your external audio device.
3. Press the MODE button until 'AUX' appears on the display.
4. Control playback from your external audio device. Adjust volume using the unit's volume knob.

6.8. Wireless Charging

The unit features a Qi-compatible wireless charging pad on top.

1. Ensure the wireless charging function is enabled by pressing the ON/OFF button for wireless charging. A blue light will indicate it's ready.
2. Place your Qi-compatible smartphone on the charging pad.
3. The light will turn red to indicate active charging.
4. Output: 7.5W for iOS devices, 10W for Android devices.

Figure 6: The wireless charging pad on the G Keni LC-10W is shown, illustrating its fast charging capabilities for both Android (10W) and iPhone (7.5W) devices.

6.9. Display Brightness (Dimmer)

Adjust the LED display brightness to your preference.

• Press the DIMMER button repeatedly to cycle through 5 levels of brightness, including an 'off' setting for complete darkness.

6.10. Snooze & Sleep Timer

Enhance your sleep routine with these functions.

• Snooze: When an alarm sounds, press the SNOOZE/SLEEP button to temporarily silence it for 9 minutes. This can be repeated within an hour.
• Sleep Timer: While playing audio (Radio, CD, USB, Bluetooth), press the SNOOZE/SLEEP button repeatedly to set the sleep timer (10-90 minutes). The unit will automatically turn off after the selected duration.

7. Maintenance

• Cleaning: Use a soft, dry cloth to clean the unit's exterior. Do not use abrasive cleaners or solvents.
• CD Care: Handle CDs by their edges. Clean with a soft, lint-free cloth in a straight line from the center to the outer edge.
• Storage: When not in use for extended periods, unplug the unit and store it in a cool, dry place.

8. Troubleshooting

9. Specifications

10. Warranty and Support

G Keni offers a one-year warranty and friendly customer service for this product. For any issues or support inquiries, please contact the seller or manufacturer directly. Please refer to your purchase documentation for specific warranty terms and contact information.