1. Introduction
This manual provides detailed instructions for the Anpviz 32-Channel 12MP PoE Network Video Recorder (NVR), model NVR7732NII416P. This NVR is designed for professional security surveillance, supporting up to 32 IP cameras with 12MP resolution and featuring 16 built-in Power-over-Ethernet (PoE) ports. Please read this manual thoroughly before installation and operation to ensure proper use and optimal performance.
2. Product Overview
The Anpviz NVR7732NII416P is a high-performance network video recorder capable of managing and recording video streams from multiple IP cameras. It supports advanced features such as H.265+ compression, facial recognition, and Video Content Analysis (VCA).
2.1 Front Panel
The front panel of the NVR features status indicators and USB ports for connecting peripheral devices such as a mouse or USB storage.
Image 2.1: Front view of the Anpviz NVR, showing the NVR branding and two USB ports on the right side.
2.2 Rear Panel
The rear panel provides all necessary connection interfaces for power, network, video output, audio, and alarm inputs/outputs.
Image 2.2: Rear panel of the Anpviz NVR, displaying various input and output ports for connectivity.
| No. | Description | No. | Description |
|---|---|---|---|
| 1 | eSATA interface | 6 | USB 3.0 and Video OUT |
| 2 | LAN 1 interfaces | 7 | ALARM IN, ALARM OUT, RS-485, Ctrl 12V, DC 12V |
| 3 | Audio input and audio output | 8 | GND |
| 4 | HDMI 1 and HDMI 2 interfaces | 9 | 100 to 240 VAC power supply |
| 5 | VGA and RS-232 interfaces | 10 | Power switch |
3. Setup
Follow these steps for initial setup of your Anpviz NVR.
- Hard Drive Installation (if not pre-installed): Ensure hard disk drives (HDDs) are properly installed in the NVR. The NVR supports up to 4 SATA drives, with a total capacity of up to 64TB.
- Connect IP Cameras: Connect your IP cameras to the NVR's 16 integrated Power-over-Ethernet (PoE) ports using Ethernet cables. PoE technology provides both power and video transmission through a single cable, simplifying installation.
- Connect to Display: Connect a monitor to the NVR using one of the HDMI or VGA ports.
- Connect to Network: Connect the NVR to your local network using an Ethernet cable plugged into the LAN port.
- Power On: Connect the NVR to a 100-240 VAC power supply and turn on the power switch.
- Initial Activation: Upon first use, you will need to activate the NVR by setting up a secure password. This step is crucial for preventing unauthorized access and ensuring system security.
Image 3.1: Illustration of the NVR activation process, emphasizing the importance of setting a secure password for system security.
Image 3.2: Diagram illustrating the Power Over Ethernet (PoE) functionality, where a single Ethernet cable provides both power and data to cameras.
4. Operation
The Anpviz NVR offers various operational features to enhance your surveillance experience.
4.1 H.265+ Compression Technology
The NVR utilizes H.265+ compression, which significantly reduces storage space and bandwidth requirements compared to older H.264 technology, while maintaining high video quality. This allows for longer recording times with the same hard drive capacity.
Image 4.1: Comparison showing H.265+ compression saving up to 75% storage space compared to H.264.
Image 4.2: Visual comparison demonstrating how H.265+ reduces storage and bandwidth usage while maintaining clear image quality.
4.2 Video Decoding and Playback
The NVR supports simultaneous playback of multiple channels at various resolutions:
- Up to 5 channels at 12MP resolution
- Up to 8 channels at 8MP resolution
- Up to 16 channels at 4MP resolution
Image 4.3: Display showing the NVR's capability to decode and display multiple high-resolution video streams simultaneously.
4.3 Motion Detection and Alerts
Configure motion detection zones for specific areas within the camera's view. When motion is detected, the NVR can trigger various alerts, including email notifications, push notifications to your mobile device, or an audible buzzer.
Image 4.4: Screenshot of a surveillance feed highlighting detected motion within a defined area.
Image 4.5: Icons representing the various instant alert methods available, such as email, push notifications, and an audible buzzer.
4.4 Remote Viewing
Access your surveillance system remotely using the Guarding Vision mobile application. This allows you to monitor your cameras from anywhere with an internet connection.
Image 4.6: Graphic indicating the NVR's capability for remote viewing and access from various locations.
5. Storage
The Anpviz NVR supports extensive storage capabilities to meet demanding surveillance needs.
- SATA Drive Support: The NVR is equipped with 4 SATA interfaces, allowing for the installation of multiple hard disk drives.
- Maximum Capacity: The total storage capacity can be extended up to 64TB, providing ample space for long-term video recording.
- H.265+ Efficiency: Leveraging H.265+ compression, the NVR optimizes storage usage, enabling longer recording periods without requiring additional physical storage.
Image 5.1: Representation of the NVR's support for four SATA drives, allowing for a total storage capacity of up to 64TB.
6. Compatibility
The Anpviz NVR is designed for optimal performance with Anpviz PoE cameras. It also offers limited compatibility with select third-party IP camera brands. For specific compatibility details, please refer to the official Anpviz support resources or contact technical support.
7. Maintenance
To ensure the longevity and reliable operation of your Anpviz NVR, consider the following maintenance practices:
- Regular Software Updates: Periodically check for and install firmware updates to ensure optimal performance, security, and access to new features.
- Environmental Conditions: Operate the NVR in a clean, dry, and well-ventilated environment to prevent overheating and dust accumulation.
- Data Backup: Regularly back up important video footage to external storage devices to prevent data loss.
- Password Management: Maintain strong, unique passwords for your NVR and associated accounts, and change them periodically.
8. Troubleshooting
If you encounter issues with your Anpviz NVR, consider the following general troubleshooting steps:
- No Video Output: Verify all video cables (HDMI/VGA) are securely connected to both the NVR and the monitor. Ensure the monitor is powered on and set to the correct input source.
- Cameras Not Displaying: Check the Ethernet connections for all cameras to the NVR's PoE ports. Ensure cameras are powered on and compatible with the NVR. Verify network settings if cameras are connected via a separate network switch.
- Remote Access Issues: Confirm the NVR is connected to the internet. Check network settings, including port forwarding if required by your network configuration. Ensure the Guarding Vision app is updated and correctly configured.
- Recording Problems: Verify that hard disk drives are properly installed and initialized. Check storage settings and ensure there is sufficient free space.
- System Freezing/Unresponsive: Try restarting the NVR. If the issue persists, consult the technical support section.
9. Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 10 x 10 x 5 inches |
| Item Weight | 13.57 pounds |
| Item Model Number | NVR7732NII416P |
| Connectivity Technology | Ethernet |
| Compatible Devices | IP Camera |
| Brand | Anpviz |
| Memory Storage Capacity | Up to 64 TB (with 4 SATA drives) |
| Number of Channels | 32 |
| PoE Ports | 16 |
| Video Output | 2x HDMI, 1x VGA |
| Video Compression | H.265+, H.265, H.264+, H.264 |
| Max Resolution | 12MP |
10. Warranty and Support
Anpviz provides comprehensive support for its products.
- Warranty: This product comes with a 2-year warranty.
- Technical Support: Lifetime technical support is available for all questions and issues.
For assistance, please contact our professional technical staff:
- Email: support@anpviz.com
- Operating Hours: Monday - Friday, 9:00 AM - 6:00 PM (local time)
Image 10.1: Anpviz customer support team ready to assist with product inquiries and technical issues.
