Gintai Product Instruction Manual

1. Product Overview

This Gintai replacement power cable is designed to connect a modular Seasonic power supply with a 6-pin PCI-e output to up to three SATA 15-pin devices. It provides reliable power distribution for hard drives, SSDs, and other SATA-powered components within your computer system.

Image: Overview of the Gintai PCI-e 6-pin to 3 SATA 15-pin power cable.

2. Safety Information

Please read and understand all safety precautions before installation to prevent damage to your components or personal injury.

• Power Off: Always ensure your computer and power supply are completely powered off and unplugged from the wall outlet before installing or removing any internal components or cables.
• Compatibility: This cable is specifically designed for Seasonic modular power supplies with a 6-pin PCI-e output. Using this cable with incompatible power supplies or non-PCI-e 6-pin ports may cause severe damage to your power supply, storage devices, or other connected components due to incorrect pinout configurations.
• Pinout Verification: It is highly recommended to verify the pinout of your power supply's 6-pin PCI-e port and compare it with the cable's 6-pin connector before connecting. Incorrect pinouts can lead to short circuits and component failure.
• Static Discharge: Take precautions against electrostatic discharge (ESD) by grounding yourself before handling internal computer components.
• Proper Connection: Ensure all connectors are firmly and correctly seated. Loose connections can lead to intermittent power delivery or arcing.
• Cable Routing: Route cables carefully to avoid obstructing airflow or interfering with other components. Do not bend cables excessively.

3. Package Contents

• 1 x Gintai PCI-e 6-Pin to 3 SATA 15-Pin Modular Power Supply Cable

4. Setup

Follow these steps to properly install the power cable:

1. Prepare Your System: Ensure your computer is completely shut down and unplugged from the power outlet. Open your computer case to access the power supply and storage devices.
2. Identify Connectors: Locate the 6-pin PCI-e modular power output port on your Seasonic power supply. Also, identify the 15-pin SATA power input ports on your hard drives, SSDs, or other SATA devices.


Image: The 6-pin PCI-e connector (right) and three 15-pin SATA connectors (left) on the cable.

3. Connect to Power Supply: Carefully insert the 6-pin connector of the Gintai cable into the corresponding 6-pin PCI-e modular output on your Seasonic power supply. Ensure it clicks securely into place.


Image: Detailed view of the 6-pin PCI-e connector, showing its pin configuration.

4. Connect to SATA Devices: Connect the 15-pin SATA power connectors from the Gintai cable to the SATA power input ports on your storage devices. You can connect up to three SATA devices. Ensure each connector is fully seated.


Image: Detailed view of a 15-pin SATA power connector.

5. Cable Management: Route the cable neatly within your computer case to avoid obstructing airflow and to maintain a tidy build.
6. Close Case and Power On: Once all connections are secure, close your computer case, plug in the power cord, and power on your system.

5. Operating

Once correctly installed, the Gintai PCI-e to SATA power cable operates passively, providing continuous power to your connected SATA devices from your modular power supply. No further user interaction is required for its operation.

6. Maintenance

This cable requires minimal maintenance:

• Regular Inspection: Periodically inspect the cable for any signs of wear, fraying, or damage, especially at the connectors.
• Cleanliness: Keep the cable free from dust and debris to ensure proper contact and prevent overheating. Use compressed air if necessary.
• Avoid Stress: Do not excessively bend, pull, or put stress on the cable or its connectors, as this can damage the internal wiring.

7. Troubleshooting

If you encounter issues, consider the following:

• Devices Not Detected/Powered:
  • Ensure the 6-pin connector is fully seated in the power supply and the SATA connectors are fully seated in the devices.
  • Verify that your Seasonic power supply is functioning correctly.
  • Crucial: Double-check the pinout of your power supply's 6-pin PCI-e port against the cable's 6-pin connector. Some users have reported issues with incorrect pin configurations leading to component damage. If the pinout does not match, do not use the cable.
  

  Image: Detailed view of the pins inside the 6-pin PCI-e connector. Verify this matches your power supply's output.

  • Test the SATA devices with a different known-good power cable if possible.
• Burning Smell or Component Damage:
  • Immediately power off and unplug your system.
  • This is a critical symptom often indicative of an incorrect pinout or faulty cable. Do not attempt to power on your system again with this cable.
  • Contact the seller or manufacturer for assistance.

8. Specifications

9. Warranty and Support

This product is subject to the standard return policy of the retailer from which it was purchased, typically offering a 30-day return window for refunds or replacements. Specific warranty details beyond this period are not provided in the product information.

For technical support or inquiries regarding this product, please contact the seller directly through the platform where the purchase was made. Provide your order details and a clear description of the issue for prompt assistance.