Introduction
Thank you for purchasing the Dwi Dowellin Mini Drone. This manual provides essential information for the safe operation, setup, and maintenance of your drone. Please read it thoroughly before first use to ensure proper functionality and to prevent damage.
Image: The Dwi Dowellin Mini Drone in red, its black remote control, and two rechargeable batteries.
Safety Information
- Age Recommendation: This product is recommended for users aged 14 years and up. Adult supervision is advised for younger users.
- Flight Environment: Fly in open, clear areas, away from people, animals, buildings, and power lines. Avoid flying in windy conditions.
- Battery Safety: Use only the provided charging cable and batteries. Do not overcharge or short-circuit batteries. Discontinue use if batteries show signs of damage or swelling.
- Propeller Safety: Keep fingers, hair, and loose clothing away from rotating propellers. The drone features a crash-proof design for added protection.
- Water Exposure: Do not expose the drone or remote control to water or moisture.
- Visual Line of Sight: Always maintain visual line of sight with the drone during flight.
Image: The Dwi Dowellin Mini Drone showcasing its full protective design, indicating enhanced safety against impacts.
What's in the Box
Verify that all components are present before beginning setup:
- Dwi Dowellin Mini Drone (Red)
- Remote Control
- USB Charging Cable
- Spare Propellers
- 2 x Drone Batteries (Lithium Polymer, 450 mAh)
- Screwdriver
- User Manual (this document)
Setup
1. Charging the Drone Battery
Connect the drone battery to the USB charging cable. Plug the USB cable into a USB power source (e.g., computer USB port, USB wall adapter). The indicator light on the USB cable will show charging status. A full charge typically takes 20-40 minutes. Do not leave batteries charging unattended.
2. Installing Drone Battery
Carefully insert the charged battery into the battery compartment on the underside of the drone. Ensure it is securely connected and the compartment cover is closed.
3. Installing Remote Control Batteries
Open the battery compartment on the back of the remote control. Insert 3 x AAA batteries (not included), ensuring correct polarity (+/-). Close the compartment cover.
4. Pairing Drone and Remote
- Place the drone on a flat, level surface.
- Turn on the drone by pressing the power button. The drone's LED lights will flash.
- Turn on the remote control.
- Push the left joystick (throttle) all the way up, then all the way down. The drone's LED lights will stop flashing and become solid, indicating successful pairing.
Operating Instructions
Basic Flight Controls
- One Key Take Off: After pairing, press the One Key Take Off button on the remote control. The drone will automatically ascend and hover at a stable altitude.
- One Key Landing: Press the One Key Landing button. The drone will slowly descend and land automatically.
- Throttle (Left Joystick):
- Push up: Increase altitude.
- Push down: Decrease altitude.
- Push left/right: Rotate drone left/right (yaw).
- Directional Control (Right Joystick):
- Push up: Fly forward.
- Push down: Fly backward.
- Push left: Fly left (strafe).
- Push right: Fly right (strafe).
Image: Illustration of the One Key Take Off and Landing function, showing the drone ascending and descending with a single button press on the remote.
Special Features
- Altitude Hold: The drone features an auto-hovering function that allows it to maintain its current height when the throttle stick is released. This provides stable flight, especially useful for beginners.
- 3D Flips & Rolls: To perform a 3D flip, press the 3D Flip button on the remote control, then quickly push the right joystick in the desired flip direction (forward, backward, left, or right).
- Headless Mode: Activate Headless Mode by pressing the dedicated button. In this mode, the drone's orientation is relative to the pilot, regardless of the drone's actual front. This simplifies control, especially when the drone is far away or its orientation is unclear.
- Speed Adjustment: The drone has 3 speed modes (Low, Mid, High). Press the Speed Adjustment button to cycle through the speeds. Adjust the speed according to your skill level and flying environment.
- LED Lights: The drone is equipped with bright LED lights, enhancing visibility and providing an impressive visual effect, especially in low-light conditions.
Image: The drone hovering stably in mid-air, illustrating the Altitude Hold feature.
Image: The drone shown in various orientations, demonstrating its ability to perform 3D flips and rolls.
Image: A visual representation of the drone's three speed settings: Low (30%), Mid (60%), and High (100%).
Maintenance
- Cleaning: Use a soft, dry cloth to clean the drone and remote control. Do not use harsh chemicals or solvents.
- Propeller Replacement: If a propeller is damaged, use the provided screwdriver to remove the screw holding it in place. Replace with a new propeller, ensuring it matches the original (A or B). Secure with the screw.
- Battery Care: Store batteries in a cool, dry place. If not used for an extended period, charge them periodically to maintain battery health. Do not store fully charged or fully discharged for long periods.
- Storage: When not in use, store the drone and remote control in a safe place to prevent damage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Drone does not respond to remote. | Not paired; low battery (drone or remote); interference. | Re-pair drone and remote. Charge drone battery. Replace remote batteries. Move to an area with less interference. |
| Drone flies erratically or drifts. | Not calibrated; damaged propeller; uneven surface at takeoff. | Place drone on a flat surface and re-calibrate (refer to remote control instructions for calibration sequence). Check and replace damaged propellers. Ensure drone is on a level surface for takeoff. |
| Short flight time. | Battery not fully charged; old battery. | Ensure battery is fully charged before flight. Consider replacing old batteries if performance degrades significantly. |
| Propellers do not spin. | Obstruction; motor issue; battery not connected. | Check for any obstructions around propellers. Ensure battery is properly connected and charged. If problem persists, contact support. |
Specifications
- Brand: Dwi Dowellin
- Model Name: D6 RED
- Color: Red
- Product Dimensions: 58.8"L x 58.8"W x 22.8"H (approx. 4.9 inches per side)
- Item Weight: 51 Grams (1.8 ounces)
- Material: Plastic
- Battery Capacity: 450 Milliamp Hours (Lithium Polymer)
- Flight Time: Up to 15 minutes (with 2 batteries)
- Charging Time: Approximately 20-40 minutes
- Maximum Range: 200 Feet
- Connectivity Technology: USB (for charging), Wi-Fi (for remote control)
- Control Type: Remote Control
- Skill Level: Beginner
- Recommended Age: 14 years and up
Warranty and Support
This product is sold by Dwi Dowellin and fulfilled by Amazon. For product support or inquiries, please refer to the seller's contact information on the purchase platform.
- Return Policy: This product is eligible for a 30-day refund/replacement return policy. Please refer to your purchase platform for specific details and procedures.
- Protection Plans: Extended protection plans may be available for purchase separately. Options include 2-Year and 3-Year protection plans. Please check the product listing for current offerings and terms.
- Manufacturer: Dwi Dowellin
- Manufacturer's Store: Visit Dwi Dowellin Store on Amazon
