Introduction
This manual provides instructions for the proper use and care of your PKPOWER 6ft USB Cable, designed specifically for connecting the ammoon GM-888 USB Condenser Microphone to a compatible device. Please read this manual thoroughly before use to ensure optimal performance and longevity of the product.
Product Overview
The PKPOWER 6ft USB Cable is a high-quality connectivity solution engineered to provide reliable data transfer and power supply for your ammoon GM-888 USB Condenser Microphone. Its robust construction ensures durability and consistent performance.
- PK-Power products are CE / FCC / RoHS certified, tested by the manufacturer to match and / or exceed the OEM specification.

Figure 1: The PKPOWER 6ft USB Cable, featuring a USB-A connector on one end and a USB-B connector on the other, with a ferrite bead for noise reduction.
Setup
- Identify Connectors: Locate the USB Type-A connector (flat, rectangular) and the USB Type-B connector (square with two chamfered corners) on the cable.
- Connect to Microphone: Insert the USB Type-B connector into the corresponding port on your ammoon GM-888 USB Condenser Microphone. Ensure it is fully seated.
- Connect to Computer/Device: Insert the USB Type-A connector into an available USB port on your computer or other compatible recording device.
- Verify Connection: Once connected, your operating system should automatically detect the ammoon GM-888 microphone. Refer to your microphone's manual for specific driver installation or software setup if required.

Figure 2: Close-up view of the USB Type-A (left) and USB Type-B (right) male connectors.

Figure 3: Example of a USB Type-A connector plugged into a host device (e.g., laptop) and a USB Type-B connector plugged into a peripheral device (e.g., microphone).
Operating Instructions
The PKPOWER USB cable is a passive component designed for data and power transmission. Once properly connected, its operation is transparent. The functionality of the microphone will depend on the connected computer or device and its software settings.
- Ensure both ends of the cable are securely connected before operating the microphone.
- Avoid bending or kinking the cable sharply, as this can damage internal wires.
- Do not force connectors into ports; they are designed to fit easily in the correct orientation.
Maintenance
To ensure the longevity and optimal performance of your PKPOWER USB cable, follow these maintenance guidelines:
- Cleaning: Gently wipe the cable and connectors with a dry, soft cloth to remove dust or debris. Do not use liquid cleaners directly on the connectors.
- Storage: When not in use, coil the cable loosely. Avoid tight coiling or wrapping around sharp objects, which can stress the cable.
- Handling: Always grasp the connector housing when plugging or unplugging the cable, rather than pulling on the cable itself.
Troubleshooting
If you encounter issues with your PKPOWER USB cable, consider the following:
- Microphone Not Detected:
- Ensure both ends of the cable are securely connected.
- Try connecting the cable to a different USB port on your computer.
- Test the microphone with a different USB cable, if available, to rule out microphone issues.
- Ensure your computer's operating system and microphone drivers are up to date.
- Intermittent Connection:
- Check for any visible damage to the cable or connectors.
- Ensure the cable is not being bent or stressed during use.
- No Power to Microphone:
- Verify the USB port on your computer is functioning correctly (e.g., by connecting another USB device).
- Some USB ports may not provide sufficient power; try a powered USB hub if available.
- If problems persist, contact PKPOWER customer support.
Specifications
| Feature | Detail |
|---|---|
| Brand | PKPOWER |
| Connector Type | USB Type A to USB Type B |
| Cable Type | USB |
| Cable Length | 6 feet (approximately 1.8 meters) |
| Compatible Devices | ammoon GM-888 USB Condenser Microphone, and other devices with a USB Type-B port |
| Item Weight | 3 ounces |
| ASIN | B0885VM2H1 |
Warranty and Support
PKPOWER products are designed for reliability. For any questions, technical support, or warranty inquiries, please contact PKPOWER customer service. Our friendly and reliable customer service will respond to you within 24 hours.
For further assistance, please visit the PKPOWER Store on Amazon.





