Introduction
Thank you for choosing the Eden 94112 3-Way Turbo Oscillating Sprinkler. This manual provides essential information for the proper setup, operation, and maintenance of your sprinkler to ensure efficient and effective watering of your lawn and garden.
Product Features
- 18 Clog-Resistant Nozzles: Provides maximum coverage for large lawns or gardens.
- Adjustable Coverage: Easy-to-use sliding tabs for range control and individual on/off switches for width adjustment.
- Turbo Drive Motor: Ensures smooth operation and consistent watering regardless of water pressure.
- Wide Coverage Area: Capable of covering up to 4,499 sq. ft. (418m²) at 40 PSI.
- Quick Connect Starter Set: Compatible with all standard U.S. garden hoses, featuring a secure twist-and-lock mechanism and water stop function for tool changes.
- Built-in Cleaning Tool: For easy maintenance and prolonged nozzle life.
- Durable Construction: Features an extra-large base for enhanced stability and durability.
Safety Information
- For outdoor use with cold water only.
- Do not spray near electrical connections or outlets.
- Always store the sprinkler indoors when not in use, especially during freezing temperatures, to prevent damage.
- Ensure all connections are secure to prevent leaks and water waste.
Setup
- Unpack the Sprinkler: Carefully remove the sprinkler and all accessories from the packaging.
- Connect to Water Source:
Attach your standard garden hose to the quick connect adapter. Ensure the connection is tight to prevent leaks. The quick connect starter set allows for easy attachment and detachment.
Image: Diagram illustrating the secure twist-and-lock mechanism of the quick connector for attaching the hose to the sprinkler.
Image: A close-up view of the quick connect adapter, showing how it attaches to a faucet and hose for simple tap connection.
- Position the Sprinkler: Place the sprinkler in the desired area of your lawn or garden. The extra-large base provides stability.
Operating Instructions
The Eden 94112 sprinkler offers precise control over your watering patterns. Adjustments can be made for flow, range, and width.
1. Adjusting Water Flow (Coverage Size)
Use the zoom flow control knob to change the water flow, which adjusts the overall size of the coverage pattern. Turning the knob will increase or decrease the water output.
Image: A diagram illustrating the control points for adjusting water flow, range, and width on the sprinkler.
2. Adjusting Spray Range (Length of Pattern)
The range sliding tabs on the side of the sprinkler allow you to change the length of the oscillating spray pattern. Move these tabs to set the desired watering distance.
Video: Demonstrates how to adjust the range sliding tabs to control the length of the spray pattern.
3. Adjusting Spray Width
The sprinkler features three on/off nozzle switches on each side. Press these switches to regulate the width of the spray, allowing for independent side adjustment to avoid watering unwanted areas like driveways or sidewalks.
Image: The Eden oscillating sprinkler actively watering a lawn, showcasing its coverage.
Image: A side view of the sprinkler in operation, demonstrating the water spray pattern.
Maintenance
- Nozzle Cleaning: The sprinkler has a built-in cleaning tool. Use this tool to clear any debris or mineral buildup from the nozzles to ensure consistent spray patterns.
Image: An end view of the sprinkler, highlighting the integrated cleaning tool for nozzle maintenance.
- Winter Storage: Before the first frost, disconnect the sprinkler from the hose, drain any remaining water, and store it indoors in a dry, protected area to prevent freezing and damage.
- General Cleaning: When not in use, rinse the tool with water to remove most of the dirt, dry it, and store indoors.
Troubleshooting
- Uneven Spray Pattern: Check nozzles for clogs and use the built-in cleaning tool to clear them. Ensure water pressure is adequate (recommended 40 PSI).
- Leaks at Connection: Ensure the quick connect adapter and hose connection are securely tightened. Check for damaged washers and replace if necessary.
- Limited Coverage: Verify that the flow control knob is fully open and the range sliding tabs are set to the maximum desired length. Ensure sufficient water pressure.
- Sprinkler Not Oscillating: Check for obstructions in the oscillating mechanism. Ensure adequate water pressure is supplied to power the turbo drive.
Specifications
| Attribute | Detail |
|---|---|
| Brand | Eden |
| Model Number | 94112 |
| Material | Plastic |
| Coverage Area | Up to 4,499 sq. ft. (418m²) at 40 PSI |
| Number of Nozzles | 18 |
| Item Dimensions (L x W x H) | 6.81 x 17.71 x 2.95 inches |
| Item Weight | 1.32 pounds |
| Maximum Pressure | 40 Pound per Square Inch |
| Maximum Flow Rate | 36 Gallons Per Minute |
Warranty and Support
The Eden 94112 3-Way Turbo Oscillating Sprinkler is backed by the Eden 2-Year Warranty. For warranty claims or technical support, please refer to the contact information provided on the product packaging or visit the official Eden website.
For additional resources and product information, visit the Eden Store on Amazon.
