Dogtra STB Beeper Collar Hawk Version Instruction Manual

1. Introduction

The Dogtra STB Beeper Collar Hawk Version is an advanced training device designed for upland gun dogs, providing clear audible signals to track your dog's location and activity in the field. This collar features a distinct hawk sound, audible up to 400 meters, and is built to withstand demanding outdoor environments with its IPX9K waterproof certification.

This instruction manual provides detailed guidance on the proper setup, operation, maintenance, and troubleshooting of your STB Beeper Collar to ensure optimal performance and longevity. Please read this manual thoroughly before using the device.

Figure 1.1: Dogtra STB Beeper Collar Hawk Version

2. Product Overview and Key Features

The STB Beeper Collar Hawk Version is engineered for reliability and effectiveness in the field. Its key features include:

• HAWK MODES: Offers two distinct Hawk modes: Run/Point and Point-Only. These modes allow you to accurately track your dog's movement and pinpoint its location when it goes on point. The hawk sound is audible for up to 400 meters, aiding in long-distance tracking.
• COMPACT DESIGN: Features a unique single-body receiver with a downward-facing beeper horn. This design minimizes bulkiness and reduces the risk of snagging on obstacles, making it ideal for active dogs weighing 25 lbs. or larger.
• ACCURATE SENSOR: Utilizes a Piezoelectric sensor for highly accurate motion detection, ensuring reliable activation of the Hawk Modes.
• IPX9K WATERPROOF CERTIFIED: The collar is IPX9K waterproof certified, meaning it can withstand close-range, high-pressure liquid sprays from multiple angles (80-100 bars, 176°F), ensuring durability in harsh weather conditions.
• RECHARGEABLE BATTERIES: Equipped with rechargeable lithium polymer batteries that provide a quick two-hour charge time, ensuring minimal downtime.

Figure 2.1: Key Features of the STB Beeper Collar

3. Components

Your Dogtra STB Beeper Collar Hawk Version package includes the following components:

• STB Beeper Collar Unit: The main device, consisting of the receiver and integrated beeper horn.
• Collar Strap: An adjustable strap to secure the beeper unit around your dog's neck.
• Battery Charging Receptacle & Rubber Plug: The port for charging the device, protected by a rubber plug to maintain waterproofing.
• LED Indicator Light: Provides visual feedback on battery status and operational mode.
• Activation Magnet: A small magnetic key used to turn the unit on/off and select modes.
• Charger: For recharging the lithium polymer batteries.
• Instruction Manual: This document.

Figure 3.1: STB Beeper Collar Components

4. Setup

4.1 Charging the Battery

Before initial use, fully charge the STB Beeper Collar. The unit comes with a lithium polymer battery that charges quickly.

1. Locate the charging receptacle on the beeper unit, usually covered by a rubber plug.
2. Carefully open the rubber plug to expose the charging port.
3. Connect the charger to the charging port.
4. Plug the charger into a standard electrical outlet. The LED indicator light will typically show a specific color (e.g., red) during charging and change color (e.g., green) when fully charged.
5. A full charge takes approximately 2 hours. Once charged, disconnect the charger and securely close the rubber plug to maintain the unit's waterproof integrity.

4.2 Attaching and Fitting the Collar

Proper collar fit is crucial for the beeper's effectiveness and your dog's comfort.

1. Thread the collar strap through the beeper unit's loops.
2. Place the collar around your dog's neck, ensuring the beeper unit is positioned centrally, typically under the dog's chin or on the side, depending on preference and dog's build.
3. Adjust the strap so that it is snug but not overly tight. You should be able to fit two fingers comfortably between the collar strap and your dog's neck.
4. Ensure the beeper horn is facing downwards for optimal sound projection and to prevent obstruction.

5. Operating Instructions

5.1 Powering On/Off and Mode Selection

The STB Beeper Collar is activated and modes are selected using the provided activation magnet.

1. To Turn On: Place the red dot on the activation magnet directly over the red dot on the beeper unit (Mode Selection & On/Off Magnetic Red Dot). Hold it there for approximately one second until you hear a series of beeps, indicating the unit is powered on. The LED indicator will flash.
2. To Select Mode: After turning on, briefly tap the activation magnet to the red dot on the beeper unit. Each tap will cycle through the available modes:
   • Run/Point Mode: The collar will emit a continuous beeping sound while the dog is moving (running) and change to a different, more rapid beeping sound when the dog is stationary (on point).
   • Point-Only Mode: The collar will remain silent while the dog is moving and will only emit the beeping sound when the dog is stationary (on point).
   Listen for the distinct beeping patterns to confirm the selected mode.
3. To Turn Off: Place and hold the activation magnet over the red dot on the beeper unit for approximately three seconds until you hear a long beep and the LED indicator light turns off.

5.2 Understanding Beeper Sounds

The Hawk sound is designed to be highly audible in outdoor environments. Familiarize yourself with the different beeping patterns for each mode:

• Run/Point Mode: A steady, rhythmic beep indicates movement. A faster, more urgent series of beeps indicates the dog is on point.
• Point-Only Mode: Silence during movement, followed by a distinct, continuous beeping when the dog is on point.

The beeper's audibility is approximately 400 meters (437 yards), allowing you to locate your dog even when out of sight.

Figure 5.1: Dog wearing the STB Beeper Collar in the field

6. Maintenance

Proper maintenance ensures the longevity and reliable performance of your Dogtra STB Beeper Collar.

• Cleaning: After each use, especially in muddy or wet conditions, wipe down the beeper unit and collar strap with a damp cloth. Ensure no debris is lodged in the beeper horn.
• Charging Port: Always ensure the rubber plug covering the charging receptacle is securely closed when not charging to maintain the unit's waterproof integrity.
• Battery Care: For optimal battery life, avoid fully discharging the battery frequently. Recharge the unit after each significant use. If storing for an extended period, charge the battery to about 50% and recharge every few months.
• Storage: Store the collar in a dry, temperate environment away from extreme temperatures and direct sunlight.
• Inspection: Periodically inspect the collar strap for wear and tear, and the beeper unit for any signs of damage.

7. Troubleshooting

If you encounter issues with your STB Beeper Collar, refer to the following troubleshooting guide:

8. Specifications

Detailed technical specifications for the Dogtra STB Beeper Collar Hawk Version:

9. Warranty and Support

The Dogtra STB Beeper Collar Hawk Version is covered by a 1-year manufacturer's warranty. This warranty is handled by Dogtra USA, ensuring that any manufacturing defects or issues within the warranty period are addressed by the brand directly.

Figure 9.1: Dogtra Warranty Notification

For warranty claims, technical support, or any questions regarding your product, please contact Dogtra customer service through their official website or the contact information provided in your product packaging. Please have your product model and purchase date available when contacting support.

Dogtra is committed to providing durable and effective training tools. For more information about Dogtra products and training philosophies, visit the official Dogtra website.