Introduction
This manual provides essential information for the safe installation, operation, and maintenance of your Satco S39056 8.5W LED Direct Wire Downlight. Please read these instructions thoroughly before installation and retain them for future reference.
Safety Information
WARNING: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installing or servicing. All electrical connections must be in accordance with local and National Electrical Code (NEC) standards. If you are unfamiliar with proper electrical wiring connections, contact a qualified electrician.
- Do not install with wet hands or when standing on wet or damp surfaces.
- This product is designed for indoor use only.
- Ensure the supply voltage is compatible with the fixture (120 Volts).
- Do not modify the fixture in any way.
- Keep flammable materials away from the fixture.
Package Contents
Verify that all components are present before beginning installation:
- Satco S39056 LED Direct Wire Downlight (1 unit)
- Instruction Manual (this document)
- Mounting hardware (typically integrated for recessed lights)
Specifications
| Feature | Detail |
|---|---|
| Model Number | S39056 |
| Wattage | 8.5 Watts |
| Voltage | 120 Volts |
| Color Temperature | 3000 Kelvin |
| Light Source Type | LED |
| Fixture Type | Non Removable, Recessed |
| Mounting Type | Ceiling Mount |
| Product Dimensions | 4 x 7 x 4 inches (Assembled) |
| Material | Copper |
| Finish Type | White |
| Control Method | App (Note: This may refer to smart home integration with additional hardware, not direct control of the fixture itself) |
Installation Instructions
IMPORTANT: Ensure power is OFF at the circuit breaker before starting installation.
- Prepare the Opening: Ensure you have a properly sized ceiling opening for a 4-inch recessed downlight.
- Connect Wiring:
- Locate the electrical junction box in the ceiling.
- Connect the black wire from the fixture to the black (live) wire from the supply.
- Connect the white wire from the fixture to the white (neutral) wire from the supply.
- Connect the green or bare copper wire from the fixture to the green or bare copper (ground) wire from the supply.
- Secure all connections with approved wire connectors.
- Secure the Fixture: Gently push the downlight into the ceiling opening. The spring clips on the sides of the fixture will secure it in place against the ceiling.
- Restore Power: Once the fixture is securely installed and all connections are checked, restore power at the circuit breaker.
Operating Instructions
The Satco S39056 LED Downlight operates by direct electrical connection. Once properly installed and powered, the light will illuminate when the connected wall switch or control method is activated.
- Power On/Off: Use the standard wall switch connected to the fixture to turn the light on or off.
- Dimming: This LED downlight is typically dimmable. Ensure you use a compatible LED dimmer switch for optimal performance and to avoid flickering or damage. Consult the dimmer switch manufacturer's instructions for proper installation and operation.
Maintenance
The Satco S39056 LED Downlight requires minimal maintenance.
- Cleaning: Ensure power is off before cleaning. Wipe the fixture with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or electrical components.
- LED Lifespan: The integrated LED light source is designed for long-term operation and is not user-replaceable.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. |
|
|
| Light flickers or dims improperly. |
|
|
| Light is not as bright as expected. |
|
|
Warranty and Support
For warranty information or technical support, please contact Satco customer service. Refer to the product packaging or the official Satco website for the most current contact details and warranty terms.
Website: www.satco.com
Additional Information
