Introduction
Thank you for choosing the LUTEC 6290Pro 15000 Lumen Dual-Head LED Work Light. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new work light. Please read this manual thoroughly before use and retain it for future reference.
Safety Information
- Always ensure the work light is placed on a stable, level surface to prevent tipping.
- Do not look directly into the LED light source when illuminated, as this may cause eye strain or damage.
- Keep the power cord away from heat, sharp edges, and moving parts.
- Ensure the power outlet matches the voltage requirements of the work light (120 Volts).
- Do not operate the light with a damaged cord or plug.
- This product is ETL rated for wet locations, making it suitable for outdoor use. However, avoid submerging the unit in water.
- Always unplug the unit from the power source before cleaning or performing any maintenance.
Package Contents
- LUTEC 6290Pro Dual-Head LED Work Light
- Telescoping Tripod
- 8 ft 3-prong power cord
Setup Instructions
- Unfold the Tripod: Place the work light on a flat surface. Release the flip lock on the tripod base and carefully spread the legs until they are fully extended and stable. Ensure the base is wide enough for maximum stability.
- Adjust Height: Loosen the height adjustment clips on the main pole. Extend the pole to your desired height, up to 5 ft. 6 in., and securely fasten the clips.
- Position Lamp Heads: The dual lamp heads can be rotated 90 degrees vertically and 330 degrees horizontally. Adjust each head independently to direct light precisely where needed.
- Connect Power: Unwind the 8 ft. 3-prong power cord from the built-in cord wrap system. Plug the power cord into a compatible 120 Volt electrical outlet.
Video demonstrating how to set up and use the LUTEC work light, including adjusting the panels and collapsing the tripod for storage.
Operating Instructions
- Power On/Off: Locate the main power switch on the central unit. Press it to turn the work light on or off.
- Adjust Brightness: Each lamp head features a control knob. Press the knob to cycle through brightness settings: 100% (High), 50% (Medium), and Off.
- Adjust Color Temperature: Rotate the control knob on each lamp head to adjust the color temperature from 3000K (warm white) to 5000K (daylight white), allowing you to select the ideal lighting for your task.
Video showcasing the LUTEC 15000 lumen work light in operation, highlighting its brightness and adjustable features.
Features
- Powerful Illumination: Delivers 15000 Lumens with a 5,000K color temperature for high-intensity, vivid light.
- Durable Construction: Features heavy-duty professional-grade die-cast aluminum housing and integrated LEDs, eliminating the need for bulb replacement.
- Adjustable & Versatile: 8 ft. power cord, adjustable height up to 5 ft. 6 in., and lamp heads that rotate 90° vertically and 330° horizontally. Tri-pod stands with flip lock ensure stability.
- Portable Design: Built-in cord wrap system makes the LED work light easy to fold up and transport.
- Weather Resistant: ETL rated for wet locations, suitable for outdoor projects.
Maintenance
- Cleaning: Ensure the light is unplugged and cool before cleaning. Wipe the surfaces with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Inspection: Regularly inspect the power cord for any signs of damage. Check all adjustable parts and fasteners to ensure they are secure.
- Storage: When not in use, collapse the tripod and wrap the cord using the built-in system. Store the light in a dry, safe place.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power to the unit; Power switch is off; Damaged cord/plug | Check power outlet; Ensure switch is ON; Inspect cord/plug for damage and replace if necessary. |
| Light is dim or flickers | Low power supply; Faulty LED driver | Ensure stable power supply; Contact customer service for assistance. |
| Lamp heads do not stay in position | Loose adjustment screws | Tighten the adjustment screws on the lamp head pivots. |
Specifications
| Specification | Value |
|---|---|
| Brand | LUTEC |
| Model | 6290Pro |
| Light Source Type | LED |
| Lumen Output | 15000 Lumens |
| Wattage | 105 Watts |
| Color Temperature | 5000K (Adjustable 3000K-5000K) |
| Voltage | 120 Volts |
| Power Source | Corded Electric |
| Cord Length | 8 ft. 3-prong |
| Housing Material | Die-cast Aluminum |
| Max Height | 5 ft. 6 in. |
| Water Resistance Level | Water Resistant (ETL for wet locations) |
| Item Weight | 10.93 Pounds |
| Indoor/Outdoor Usage | Outdoor |
Warranty and Support
LUTEC provides 7*24h after-sales service for this product. If you encounter any issues or have questions regarding your LUTEC 6290Pro work light, please contact our customer support team for prompt assistance. Refer to your purchase documentation for specific warranty terms and contact information.
