Barco CX-30
Barco ClickShare CX-30 Wireless Conferencing System
User Manual
Model: CX-30 | Brand: Barco
Introduction
The Barco ClickShare CX-30 is a wireless conferencing system designed to facilitate seamless collaboration in medium-sized meeting rooms. It enables users to interact, discuss, and collaborate with remote participants, ensuring productive and engaging meetings.
Key Features:
- Interact, discuss, collaborate with remote participants enjoying interactive meetings with touch.
- Full interactivity and moderation.
- Full BYOD (Bring Your Own Device) support.
- Collaborate remotely.
Setup
1. Unboxing the System
Carefully remove all components from the packaging. The box should contain the ClickShare Base Unit, two ClickShare Buttons, and a power cable.
Image: The Barco ClickShare CX-30 system, showing the main base unit and two accompanying ClickShare Buttons.
2. Connecting the Base Unit
Connect the ClickShare Base Unit to your meeting room display (monitor, projector, or interactive flat panel) using an HDMI cable. Ensure the display is set to the correct input source.
Image: Rear view of the CX-30 Base Unit, highlighting the power input, HDMI output, Ethernet port, and Kensington lock slot.
- Connect the power cable to the power input port on the rear of the Base Unit and plug it into a power outlet.
- For network connectivity, connect an Ethernet cable to the LAN port on the rear of the Base Unit.
- Connect any USB peripherals (e.g., camera, speakerphone) to the USB-A or USB-C ports on the front of the Base Unit.
Image: Front view of the CX-30 Base Unit, showing the USB-A and USB-C ports for peripheral connections.
3. Initial Configuration
Once powered on, the ClickShare Base Unit will display instructions on the connected screen. Follow the on-screen prompts to complete the initial setup, including network configuration and pairing of ClickShare Buttons if necessary.
Operating the System
1. Connecting with ClickShare Button
To share content, plug a ClickShare Button into a USB-A or USB-C port on your laptop. The Button will light up white when ready.
Image: The Barco ClickShare CX-30 Base Unit and two ClickShare Buttons, illustrating their compact design.
2. Sharing Your Screen
Press the ClickShare Button to instantly share your laptop's screen to the meeting room display. The Button will turn red when sharing is active. Press it again to stop sharing.
3. Using the ClickShare App (BYOD)
For mobile devices or laptops without a USB port, download the ClickShare App from your device's app store. Connect your device to the ClickShare Wi-Fi network (displayed on the meeting room screen) and use the app to share content.
4. Interactivity and Moderation
The CX-30 supports full interactivity, allowing touchback functionality on compatible displays. The moderation feature enables a designated moderator to control who is sharing content, ensuring smooth meeting flow.
Maintenance
1. General Care
Keep the ClickShare Base Unit and Buttons in a clean, dry environment. Avoid exposing them to extreme temperatures, humidity, or direct sunlight.
2. Cleaning
Wipe the surfaces of the devices with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as they may damage the finish or internal components.
3. Firmware Updates
Regularly check for and install firmware updates for the ClickShare Base Unit. Updates often include performance improvements, new features, and security enhancements. Refer to the Barco support website for the latest firmware and update instructions.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No image on display. | Incorrect input source selected on display; loose HDMI cable; Base Unit not powered on. | Check display input; ensure HDMI cable is securely connected; verify Base Unit is powered and indicator light is on. |
| ClickShare Button not working. | Button not properly plugged in; Button not paired; driver issue. | Ensure Button is fully inserted; re-pair the Button with the Base Unit (refer to Barco support for instructions); try a different USB port. |
| Poor video quality or lag. | Weak Wi-Fi signal; network congestion. | Ensure Base Unit is within optimal Wi-Fi range; check for network interference; consider a wired Ethernet connection for the Base Unit. |
For more detailed troubleshooting, please refer to the official Barco ClickShare support resources.
Specifications
- Model: CX-30
- Product Dimensions: 5 x 5 x 1 inches
- Item Weight: 2.88 pounds
- ASIN: B087ZS5556
- Manufacturer: Barco
- First Available: May 2, 2020
Warranty and Support
Warranty Information
The Barco ClickShare CX-30 typically comes with a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your product or visit the official Barco website. Protection plans may also be available for extended coverage.
Customer Support
For technical assistance, product registration, or to access additional resources, please visit the Barco Support Website. You can also find FAQs, drivers, and software updates there.
This product is eligible for a 30-day refund/replacement return policy from the date of purchase.
Related documentsCX-30
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.