DYNAMIC SAUNAS San Marino 2-Person Low EMF Far Infrared Sauna

Introduction

Thank you for choosing the DYNAMIC SAUNAS San Marino 2-Person Low EMF Far Infrared Sauna. This manual provides essential information for the safe assembly, operation, and maintenance of your sauna. Please read all instructions carefully before installation and use to ensure proper function and longevity of your product.

Important Safety Information

Failure to follow these safety guidelines may result in electric shock, fire, serious injury, or death. Keep this manual for future reference.

• Consult a physician before using the sauna if you have any health conditions, are pregnant, or are taking medication.
• Do not use the sauna under the influence of alcohol or drugs.
• Ensure the sauna is properly grounded and connected to a dedicated electrical circuit as specified in the installation section.
• Keep all flammable materials away from the sauna.
• Do not attempt to modify or repair the sauna yourself. Contact qualified service personnel.
• Avoid prolonged exposure to high temperatures. Limit sessions to recommended durations.
• Children should not use the sauna without adult supervision.

Setup and Installation

Your DYNAMIC SAUNAS San Marino sauna is delivered curbside. Ensure you have adequate assistance for moving and assembling the unit. Assembly typically requires two adults.

Unpacking and Site Preparation

• Choose a level, dry indoor location with sufficient space.
• Unpack all components carefully, checking against the packing list.
• Ensure the electrical outlet is easily accessible and meets the sauna's power requirements.

Assembly Steps (General Guide)

1. Assemble the base and floor panels.
2. Attach the back wall panel, ensuring all electrical connections are routed correctly.
3. Install the side wall panels, connecting them securely to the back wall and base.
4. Place the bench and any interior components.
5. Install the front panel, including the door.
6. Position the roof panel, connecting any overhead lighting or control panel wiring.
7. Verify all connections are secure and the sauna is stable.

Image: The fully assembled Dynamic San Marino 2-Person Far Infrared Sauna, showcasing its hemlock wood construction and glass door.

Image: A slightly angled front view of the Dynamic San Marino sauna, highlighting the control panel on the left side and the interior bench.

Electrical Requirements

Ensure your electrical supply meets the sauna's requirements. Consult a qualified electrician if unsure. The sauna requires a standard household outlet, but a dedicated circuit is recommended to prevent overloading.

Operating Instructions

Familiarize yourself with the control panel before your first session.

Powering On and Temperature Setting

• Plug the sauna into a suitable electrical outlet.
• Use the main power button on the control panel to turn the sauna on.
• Adjust the desired temperature and session duration using the control panel. The 6 Carbon heating elements will begin to warm the sauna.
• Allow 10-15 minutes for the sauna to preheat to your desired temperature.

Image: The interior of the Dynamic San Marino sauna, showing the arrangement of the carbon heating elements on the back wall and below the bench.

Music System and Lighting

• The sauna is equipped with a music system featuring Bluetooth capability and 2 dynamic speakers.
• Pair your Bluetooth device with the sauna's audio system to play music.
• Utilize the interior reading light or chromotherapy lighting system via the control panel to enhance your sauna experience.

Image: A grid displaying various color options for the chromotherapy lighting system, including yellow, green, pink, white, blue, red, purple, orange, and teal.

Low EMF Technology

The San Marino sauna features Low EMF (Electromagnetic Field) Far Infrared heating elements, designed to minimize exposure to electromagnetic fields while providing therapeutic heat.

Image: An illustration showing common household sources of electromagnetic fields (EMF) such as TVs, phones, and Wi-Fi, alongside an EMF reader device (Trifield TF2). This highlights the sauna's low EMF design.

Maintenance

Regular maintenance ensures the longevity and optimal performance of your sauna.

Cleaning the Interior

• Wipe down the interior wood surfaces with a clean, damp cloth after each use.
• For deeper cleaning, use a mild, non-toxic wood cleaner specifically designed for saunas. Avoid harsh chemicals or abrasive cleaners.
• Ensure the sauna is completely dry before closing the door for extended periods.

Exterior Care

• Dust the exterior with a soft, dry cloth.
• Avoid exposing the exterior to excessive moisture.

Heater and Electrical Component Care

• Do not spray water directly onto the heating elements or electrical components.
• Periodically inspect the power cord for any signs of damage.

Troubleshooting

If you encounter issues with your sauna, refer to the following common problems and solutions.

If the problem persists after attempting these solutions, please contact DYNAMIC SAUNAS customer support.

Specifications

• Capacity: 2 Person
• Exterior Dimensions (WDH): 47" x 42" x 75" (roof overhang: add 2")
• Interior Dimensions (WDH): 43" x 37" x 68"
• Heating Elements: 6 Carbon Far Infrared heating elements
• Wood Type: Natural Hemlock wood construction
• Lighting: Interior reading light and chromotherapy lighting system
• Audio System: Music System with Bluetooth Capability and 2 dynamic speakers (pre-amp included, no radio)
• EMF Level: Low EMF
• ASIN: B087Z7M2GZ

Warranty and Customer Support

For detailed warranty information, please refer to the warranty card included with your product or visit the official DYNAMIC SAUNAS website. Keep your proof of purchase for warranty claims.

If you require technical assistance, replacement parts, or have any questions not covered in this manual, please contact DYNAMIC SAUNAS customer support directly. Contact information can typically be found on the manufacturer's website or your purchase documentation.

Manufacturer: DYNAMIC SAUNAS

Product Model: San Marino