Actto KMC-04

Download PDF
Contents

ACTTO KMC-04 Retro Wireless Keyboard & Mouse Combo

Model: KMC-04 | Brand: Actto

Introduction

Thank you for purchasing the ACTTO KMC-04 Retro Wireless Keyboard and Mouse Combo. This product combines a classic retro design with modern wireless technology, offering a comfortable and efficient input solution for your personal computer. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device.

ACTTO KMC-04 Retro Wireless Keyboard and Mouse Combo in Pink

Image: The ACTTO KMC-04 Retro Wireless Keyboard and Mouse Combo, featuring a pink keyboard with round white keys and a matching pink and white wireless mouse.

Setup

Follow these steps to set up your wireless keyboard and mouse combo:

  1. Unpack the Contents: Carefully remove the keyboard, mouse, and USB receiver from the packaging.
  2. Install Batteries:
    • Keyboard: Locate the battery compartment on the underside of the keyboard. Insert the required batteries (typically AAA, not included) according to the polarity indicators (+/-).
    • Mouse: Locate the battery compartment on the underside of the mouse. Insert the required batteries (typically AA, not included) according to the polarity indicators (+/-).

    Note: Batteries are required for operation and are not included with the product.

  3. Connect the USB Receiver:

    Plug the small USB wireless receiver into an available USB port on your computer. Your computer should automatically detect and install the necessary drivers. This may take a few moments.

    USB Wireless Receiver

    Image: A white USB wireless receiver with wireless signal icons emanating from it, indicating its function.

  4. Power On:
    • Keyboard: Ensure the power switch (if present) on the keyboard is in the "ON" position.
    • Mouse: Ensure the power switch on the underside of the mouse is in the "ON" position.
  5. Testing: Once connected, test the keyboard by typing and the mouse by moving the cursor and clicking. If they do not respond, refer to the Troubleshooting section.

Operating Instructions

Keyboard Usage

The KMC-04 keyboard features a standard QWERTY layout with additional Korean characters. It operates like a typical membrane keyboard.

  • Typing: Press the keys to input characters.
  • Function Keys (F1-F12): These keys may have secondary functions (e.g., multimedia controls, volume) accessible by pressing them alone or in combination with the Fn key, depending on your operating system and keyboard design.
  • Language Switching: To switch between Korean and English input, use your operating system's language settings or the designated language switch key (if present on the keyboard, typically indicated by a language icon or specific key combination like Alt+Shift or Ctrl+Space).
Close-up of ACTTO KMC-04 keyboard keys showing Korean and English characters

Image: A close-up view of several round keyboard keys, clearly showing both English letters and corresponding Korean characters printed on them.

Mouse Usage

The optical mouse provides precise cursor control.

  • Left Click: Primary action, typically for selecting items or opening links.
  • Right Click: Opens context menus.
  • Scroll Wheel: Scrolls content up or down. Can also be pressed for middle-click functionality.
  • Movement: Move the mouse on a flat surface to control the cursor on the screen.
Hand holding the ACTTO KMC-04 wireless mouse

Image: A hand gently gripping the ACTTO KMC-04 wireless mouse, demonstrating its ergonomic fit.

Maintenance

Proper care will extend the life of your keyboard and mouse:

  • Cleaning:
    • Use a soft, dry, lint-free cloth to wipe down the surfaces of the keyboard and mouse.
    • For stubborn dirt, slightly dampen the cloth with water or a mild, non-abrasive cleaner. Do not spray liquids directly onto the devices.
    • Use compressed air to remove dust and debris from between the keyboard keys.
  • Battery Replacement: Replace batteries when performance degrades or the low battery indicator (if present) illuminates. Always use fresh batteries of the specified type.
  • Storage: When not in use for extended periods, turn off the devices to conserve battery life. Store them in a cool, dry place away from direct sunlight and extreme temperatures.
  • Avoid Liquids: Keep the keyboard and mouse away from liquids to prevent damage to internal components.

Troubleshooting

If you encounter issues with your ACTTO KMC-04 combo, try the following solutions:

  • No Response from Keyboard/Mouse:
    • Ensure batteries are correctly installed and not depleted. Replace them if necessary.
    • Check that the power switches on both the keyboard and mouse are in the "ON" position.
    • Verify the USB receiver is securely plugged into a working USB port on your computer. Try a different USB port.
    • Restart your computer.
  • Lag or Intermittent Connection:
    • Move the keyboard and mouse closer to the USB receiver.
    • Ensure there are no large metal objects or other wireless devices (e.g., Wi-Fi routers, cordless phones) operating too close to the receiver, which could cause interference.
    • Replace batteries.
  • Mouse Cursor Jumps or is Inaccurate:
    • Clean the optical sensor on the underside of the mouse.
    • Use the mouse on a clean, non-reflective, and uniform surface (e.g., a mouse pad).

If the problem persists after trying these steps, please contact customer support.

Specifications

FeatureDetail
BrandActto
ModelKMC-04
ConnectivityWireless
Keyboard TypeMembrane
Mouse TechnologyOptical
Hand Orientation (Mouse)Right
Power SourceBattery Powered (Batteries not included)
Compatible DevicesPersonal Computer
Product Dimensions44.5 x 13.3 x 38.5 cm
Product Weight893 g
ASINB087YYKPYC
First Available DateMay 22, 2020

Warranty and Support

ACTTO products are manufactured to high-quality standards. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included in your product packaging for specific terms and conditions, including the warranty period and coverage details.

For technical support, troubleshooting assistance, or warranty claims, please contact ACTTO customer service through their official website or the contact information provided in your product documentation. When contacting support, please have your product model (KMC-04) and purchase details ready.

Please note that warranty terms may vary by region and retailer.

© 2024 Actto. All rights reserved.

This manual is for informational purposes only. Specifications are subject to change without notice.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.