1. Introduction
This manual provides comprehensive instructions for the installation, setup, operation, and maintenance of your Steinel L 620 CAM WiFi Security Light. Please read this manual thoroughly before installation and use to ensure proper function and safety.
The Steinel L 620 CAM is an advanced outdoor wall light featuring a Full-HD smart camera, intercom system, alarm function, and an infrared motion sensor. It is designed to enhance the security and convenience of your home's exterior.
2. Safety Information
WARNING: Installation must be carried out professionally and in accordance with national wiring regulations. Always switch off the power supply before commencing any installation or maintenance work.
- Ensure the power supply is disconnected at the main circuit breaker before installation.
- This product is designed for outdoor use and has an IP44 rating, indicating protection against solid objects larger than 1mm and splashing water from any direction.
- Do not attempt to modify or repair the device yourself. Refer all servicing to qualified personnel.
- Keep packaging materials away from children.
- The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
3. Package Contents
Verify that all components are present before beginning installation:
- Steinel L 620 CAM WiFi Security Light Unit
- Mounting Accessories (screws, wall plugs)
- 16 GB Micro SD card (pre-installed or included separately)
- Quick Start Guide (this manual)
4. Product Overview
Figure 4.1: Front view of the Steinel L 620 CAM Security Light.
Figure 4.2: Side view of the Steinel L 620 CAM, showing its wall-mounted design.
Key Components:
- LED Sensor Light: Provides warm white illumination (3000 Kelvin, 925 Lumens) with soft light start.
- 180° Infrared Motion Sensor: Detects movement up to 10 meters, triggering light and recording.
- Full-HD Camera (1080p): High-quality camera for clear images, even at night. Horizontally and vertically swivelling for optimal coverage.
- Intercom System: Enables two-way communication via the app.
- Micro SD Card Slot: For local storage of recordings (16 GB card included).
Features:
- Wide angle camera with 40° more detection angle.
- Automatic recording upon motion detection with push notifications to your smartphone.
- Alarm function for unwelcome guests.
- Control and configuration via the free "Steinel CAM" app (available on Google Play and App Store).
- Dimmable night light and main light settings.
- Screenshot and manual video recording capabilities.
5. Installation
Installation of the Steinel L 620 CAM should be performed by a qualified electrician to ensure compliance with local electrical codes and safety standards.
Pre-Installation Checklist:
- Ensure the mounting surface is stable and can support the weight of the unit (approx. 1.1 kg).
- Verify a stable WiFi connection (minimum 2 Mbit/s) at the intended mounting location.
- Gather necessary tools: drill, screwdriver, wire strippers, level.
Installation Steps:
- Switch off Power: Before starting, ensure the main power supply to the installation area is completely switched off at the circuit breaker.
- Mounting Fixture:
Video 5.1: Installation overview of the Steinel L 620 CAM, showing the mounting process and wiring connections.
Secure the mounting fixture to the wall using the provided screws and wall plugs. Ensure it is level and firmly attached.
- Wiring: Connect the electrical wires (Live, Neutral, Earth) to the corresponding terminals on the mounting fixture. Refer to the wiring diagram provided in the quick start guide or on the device itself. Ensure all connections are secure.
- Attach Light Unit: Carefully attach the Steinel L 620 CAM unit to the mounted fixture, ensuring it clicks securely into place.
- Restore Power: Once the unit is securely installed, restore power at the main circuit breaker. The light will perform a self-test.
6. Setup and App Configuration
The Steinel L 620 CAM is controlled and configured via the "Steinel CAM" mobile application.
6.1. Download the App:
Search for "Steinel CAM" on your smartphone's app store or scan the QR code provided in the product packaging.
6.2. Initial Setup:
- Launch App: Open the "Steinel CAM" app on your smartphone.
- Add Device: Tap the "Add L 600 CAM" or "+" icon to begin adding your device.
Figure 6.1: App screen for adding a new camera.
- Connect to WiFi: The app will prompt you to connect to your home WiFi network. Enter your WiFi network name (SSID) and password. Ensure your phone is connected to the same 2.4GHz WiFi network that the light will connect to.
Video 6.2: Quick start guide for the Steinel L 620 CAM, demonstrating app setup and WiFi connection.
- Recording Options: Select your preferred video recording option (e.g., Sensor mode for motion-triggered recording, Continuous recording). Sensor mode is recommended to save storage space.
- Complete Setup: Follow any remaining on-screen prompts to complete the device setup.
7. Operating Instructions
The Steinel CAM app provides full control over your security light's features.
7.1. Live View and Intercom:
From the main app screen, select your camera to view the live feed. You can use the "Hold to Talk" button for two-way communication via the intercom system.
Figure 7.1: User interacting with the live camera feed on the Steinel CAM app.
Video 7.2: Demonstration of the intercom and live view features of the Steinel security light.
7.2. Recording and Playback:
- Manual Recording: Tap the "Record" button to manually start and stop video recording.
- Screenshots: Use the "Screenshot" button to capture still images from the live feed.
- Playback: Access recorded events via the "Replay" or "Picture Library" section of the app. Events triggered by motion detection will be listed with timestamps.
Figure 7.3: App screen displaying a log of detected events and recordings.
7.3. Light and Sensor Settings:
Adjust light levels, motion sensor reach, and basic brightness settings through the app's "Security Level" or "Light & Recording Settings" menu.
- Light Level: Control the brightness of the main light.
- Reach: Adjust the detection range of the 180° infrared sensor (Near/Far).
- Basic Brightness: Set a dim night light level (e.g., 0% to 40%) for continuous illumination during darkness.
- Full Brightness: Define the brightness level when motion is detected (e.g., 30% to 100%).
- Time Setting: Configure how long the light stays on after motion detection (e.g., 1, 3, 10, 15 minutes).
7.4. Alarm and Notifications:
Configure alarm sounds and push notifications for motion detection events. The alarm can be activated to deter intruders.
8. Maintenance
- Cleaning: Regularly clean the light and camera lens with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- SD Card Management: Periodically check the SD card storage via the app. If the card is full, older recordings may be overwritten. Consider backing up important footage. Some users have reported issues with the SD card slot; exercise caution when inserting or removing the card.
- Firmware Updates: Check the app regularly for firmware updates to ensure optimal performance and security.
9. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light not turning on/off as expected. | Incorrect sensor settings (reach, time), continuous light mode activated, power issue. | Check app settings for light level, reach, and time. Ensure "Basic Brightness" is not set too high if you expect it to turn off completely. Verify power supply. |
| Poor video quality or choppy recordings. | Weak WiFi signal, slow internet speed, full/corrupt SD card. | Ensure strong WiFi signal at the light's location (minimum 2 Mbit/s). Check internet speed. Format or replace the SD card. |
| App frequently disconnects or fails to connect. | Unstable WiFi connection, incorrect WiFi password, app/firmware outdated. | Verify WiFi strength and password. Ensure your phone is on the same 2.4GHz network. Update app and device firmware. Try resetting the camera and re-pairing. |
| No motion detection or notifications. | Sensor sensitivity too low, detection zone not configured, notifications disabled. | Adjust sensor sensitivity and detection zone in the app. Enable push notifications in both the app and your phone's system settings. |
10. Specifications
- Model: L 620 CAM
- Brand: STEINEL
- Product Dimensions: 13.1 x 7.8 x 30.5 cm
- Item Weight: 1.1 kg
- Power Supply: 220 Volts AC
- Wattage: 14.1 Watts
- Luminous Flux: 925 Lumens
- Colour Temperature: 3000 Kelvin (Warm white)
- Colour Rendering Index (CRI): 80
- Average Life: 50000 Hours
- Bulb Type: LED (Dimmable)
- Area Lighting Classification: IP44
- Motion Sensor: 180° Infrared, up to 10m range
- Camera Resolution: Full-HD (1080p)
- Storage: 16 GB Micro SD card included
- Connectivity: WiFi (2.4GHz recommended)
11. Warranty and Support
For warranty information and technical support, please refer to the official STEINEL website or contact their customer service directly. Keep your purchase receipt as proof of purchase.
Recycling Information: View recycling information for this and other types of lamps on the manufacturer's website. Learn more about how to clean up and dispose of broken or damaged lamps safely.
