1. Product Overview
The CAT® CAT017411M High Visibility Work Gloves are designed for hand protection in various work environments, particularly in low-light conditions. These gloves feature a polyester shell construction for durability and a textured latex coating on the palm and fingers for enhanced grip and resistance. The knit wrist design ensures a secure fit and helps prevent debris entry.
Image: A pair of CAT® CAT017411M High Visibility Work Gloves. The gloves are bright yellow-green with black textured latex coating on the palms and fingers, and a black CAT logo on the wrist cuff.
2. Key Features
- High Visibility Design: Bright yellow-green polyester shell enhances visibility in low-light conditions.
- Durable Construction: Polyester shell provides strength and longevity.
- Enhanced Grip: Textured latex coating on palms and fingers offers improved grip and resistance to tears and temperature fluctuations.
- Secure Fit: Knit wrist design ensures a snug fit, preventing accidental slipping and keeping out dirt and debris.
- Safety Standards: Tested to EN388:2016 - 2142X for protection against puncture, abrasion, cut, and tears.
3. Usage Instructions
- Selection: Ensure the correct glove size is chosen for a comfortable and secure fit.
- Donning: Slide hands into the gloves, ensuring fingers are fully seated and the knit wrist is snug around the wrist.
- Application: These gloves are suitable for general work tasks requiring hand protection against abrasions, minor cuts, and for situations where high visibility is beneficial. Examples include material handling, assembly tasks, and general maintenance.
- Doffing: To remove, grasp the cuff of one glove and pull it off, turning it inside out. Repeat for the other glove.
4. Care and Maintenance
- Cleaning: If soiled, gently wipe the gloves with a damp cloth. For heavier soiling, hand wash with mild soap and cold water. Avoid harsh detergents or bleach.
- Drying: Air dry thoroughly away from direct heat or sunlight. Do not machine dry.
- Storage: Store gloves in a cool, dry place away from direct sunlight, chemicals, and sharp objects.
- Inspection: Regularly inspect gloves for signs of wear, tears, punctures, or damage before each use.
5. Safety Information
These gloves are designed to provide protection against specific hazards as indicated by their EN388:2016 rating. However, no glove can provide complete protection against all risks. Always assess the specific hazards of your work environment.
- EN388:2016 - 2142X Rating: This indicates resistance levels for:
- Abrasion Resistance (Level 2)
- Circular Blade Cut Resistance (Level 1)
- Tear Resistance (Level 4)
- Puncture Resistance (Level 2)
- Impact Protection (X - Not tested or not applicable)
- Limitations: Do not use these gloves near moving machinery where entanglement is a risk. Not intended for protection against extreme heat, open flames, or chemical immersion unless specifically rated for such.
- Replacement: Replace gloves immediately if they show any signs of damage, wear, or degradation, as their protective qualities may be compromised.
- Proposition 65 Warning: This product may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
6. Specifications
| Attribute | Detail |
|---|---|
| Product Dimensions | 9 x 4.4 x 0.5 inches |
| Item Weight | 2.08 ounces |
| Model Number | CAT017411M |
| Department | unisex-adult |
| Manufacturer | Cat |
| Outer Material | Polyester |
| Coating Material | Latex (textured) |
| Closure Type | Pull On |
| Safety Standard | EN388:2016 - 2142X |
7. Troubleshooting
As a protective garment, troubleshooting for work gloves is generally limited to inspection and replacement.
- Issue: Gloves feel loose or are slipping during use.
Solution: Ensure the correct size was selected. If the gloves have stretched due to prolonged use, consider replacement. - Issue: Reduced grip.
Solution: Inspect the latex coating for wear or damage. Clean gloves if they are soiled with grease or dirt. If coating is significantly worn, replace gloves. - Issue: Visible damage (tears, holes, excessive wear).
Solution: Immediately discontinue use and replace the gloves. Damaged gloves offer compromised protection.
8. Warranty and Support
For information regarding warranty coverage, product support, or to report any issues with your CAT® CAT017411M High Visibility Work Gloves, please contact the manufacturer or your point of purchase. Keep your purchase receipt as proof of purchase.
You can visit the official CAT store for more information: CAT Official Store
