Accu-Chek Guide Glucose Test Strips User Manual

Introduction

This manual provides essential information for the proper use and care of Accu-Chek Guide Glucose Test Strips. These test strips are designed for use with Accu-Chek Guide, Guide Me, and Guide Link Meters to measure blood glucose levels.

Always read the full instructions for use provided with your Accu-Chek Guide meter and test strips before performing a blood glucose test.

Safety Information

Warning:

• Keep out of reach of children.
• Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.
• For in vitro diagnostic use only. Do not ingest.
• Do not use test strips past their expiration date.
• Store test strips in their original vial with the cap tightly closed.

Product Overview

Accu-Chek Guide test strips are designed for simple and accurate blood glucose testing. Key features include:

• Easy-fill strip: Allows a tiny drop of blood to be placed anywhere along the end of the strip.
• SmartPack: Patented spill-resistant vial designed to dispense one strip at a time, reducing dropped strips.
• Advanced Accuracy: Ensures reliable test results.
• Compatibility: Exclusively for use with Accu-Chek Guide, Guide Me, and Guide Link Meters.

Image: Accu-Chek Guide 100 Test Strips packaging, showing the test strip vial and compatible meters.

Image: Close-up of the Accu-Chek Guide SmartPack vial, highlighting its design to prevent spilled strips.

Setup and Preparation

1. Gather Supplies: Ensure you have your Accu-Chek Guide meter, a new Accu-Chek Guide test strip, a lancing device, and a lancet.
2. Wash and Dry Hands: Thoroughly wash your hands with warm, soapy water and dry them completely. This helps prevent contamination and ensures accurate results.
3. Prepare Lancing Device: Load a new lancet into your lancing device according to its specific instructions.

Image: Visual guide showing the five simple steps for blood glucose testing, starting with washing hands.

Operating Instructions: Performing a Blood Glucose Test

Follow these steps to perform a blood glucose test using your Accu-Chek Guide test strips:

1. Insert Test Strip: Remove one test strip from the SmartPack vial and immediately close the cap tightly. Insert the metallic end of the test strip into the meter. The meter will turn on automatically.
2. Collect Blood Sample: Use your lancing device to obtain a blood drop from your fingertip.
3. Apply Sample to Strip: Gently touch the yellow edge of the test strip to the blood drop. The strip will draw the blood in. Do not apply blood to the top of the strip.
4. Read Results: The meter will display your blood glucose result in approximately 4 seconds.

Image: Step-by-step visual guide demonstrating how to dispense a test strip, insert it into the meter, collect a blood sample, and apply it to the strip.

Image: Close-up showing a small drop of blood being applied to the wide yellow dosing area of the Accu-Chek Guide test strip.

Image: Diagram illustrating the features of the Accu-Chek Guide test strip, including the full-width sample area and colorful graphics for sample collection.

Maintenance and Storage

• Store Accu-Chek Guide test strips in their original vial with the cap tightly closed to protect them from humidity and light.
• Store test strips at temperatures between 4°C and 30°C (39°F and 86°F).
• Do not store test strips in high humidity areas like bathrooms.
• Do not refrigerate or freeze test strips.
• Dispose of used test strips and lancets safely in a sharps container or according to local regulations.

Troubleshooting

If you encounter issues during testing, refer to your Accu-Chek Guide meter's user manual for specific error codes and troubleshooting steps. Common issues related to test strips include:

• Error Message after Strip Insertion: Ensure the test strip is inserted correctly with the metallic end fully in the meter. Check if the strip is expired.
• Insufficient Blood Sample: If the meter indicates an insufficient blood sample, apply another drop of blood to the same strip within the allowed time frame (refer to meter manual). If unsuccessful, discard the strip and repeat the test with a new strip.
• Inaccurate Results: Ensure hands are clean and dry. Check the expiration date of the test strips. Verify that the test strips are stored correctly. Perform a control solution test if you suspect inaccurate results.

For persistent issues, contact Accu-Chek Customer Support.

Specifications

Warranty and Support

For questions regarding your Accu-Chek Guide Glucose Test Strips or any Accu-Chek product, please contact Accu-Chek directly. Warranty information for test strips is typically covered under the terms of sale and product packaging. Always refer to the official Accu-Chek website or product packaging for the most current warranty details and support contact information.

Accu-Chek cannot ensure the quality of products from unauthorized sellers. For authentic products and support, ensure your purchase is from an authorized retailer.

Additional Resources

For more information on Accu-Chek products and diabetes management, visit the official Accu-Chek website or consult your healthcare professional.

Image: Information about the mySugr App, which can import meter data and help with diabetes management.