Introduction
This manual provides detailed instructions for the Aramox Shifter Lock Cover, model 77271-T0A-A01ZA. This component is designed as an aftermarket replacement part for specific vehicle models, intended to cover and protect the shift lock release button mechanism. It is crucial to verify compatibility with your vehicle before proceeding with installation.
The shifter lock cover is a silver-gray component, made from Acrylonitrile Butadiene Styrene (ABS) with a polished finish, ensuring durability and a seamless integration with your vehicle's interior.
Setup and Installation
The Aramox Shifter Lock Cover (OEM: 77271-T0A-A01ZA) is designed for straightforward installation. This part is specifically compatible with CRV models from 2012 and 2014.
Compatibility
- Vehicle: CRV
- Model Years: 2012, 2014
- OEM Part Number: 77271-T0A-A01ZA
Installation Steps
- Ensure the vehicle is parked and the engine is off for safety.
- Locate the existing shifter lock cover or the designated area for its installation.
- If replacing an old component, carefully remove it. Refer to your vehicle's service manual for specific removal procedures if necessary.
- Align the new Aramox Shifter Lock Cover (model 77271-T0A-A01ZA) with the designated slot on the shifter assembly.
- Gently press the cover into place until it snaps securely. The integrated snap-on mechanism ensures a firm attachment.
- Verify that the cover is properly seated and does not obstruct or interfere with the shifter's movement or the operation of the shift lock release button.

Image: Top-down view of the Aramox Shifter Lock Cover, showcasing its silver-gray finish and overall shape.

Image: Close-up side view of the shifter lock cover, illustrating the snap-on attachment clips for secure installation.

Image: The Aramox Shifter Lock Cover shown in context with a gray CRV, demonstrating its intended vehicle fitment.
Operating Instructions
The shifter lock cover functions as a protective and aesthetic component for the shift lock release button. Its primary role is to cover the internal mechanism, preventing debris ingress and maintaining the vehicle's interior appearance.
No specific operational steps are required for the cover itself, as it is a passive component that remains in place during normal vehicle operation.
Maintenance
To ensure the longevity and appearance of your Aramox Shifter Lock Cover, follow these maintenance guidelines:
- Cleaning: Wipe the cover periodically with a soft, damp cloth. Avoid using abrasive cleaners, harsh chemicals, or solvents, as these may damage the polished finish or the ABS material.
- Inspection: Regularly inspect the cover for any signs of damage, such as cracks or discoloration. Ensure it remains securely attached and does not show any signs of looseness or wear that could affect its function or appearance.
Troubleshooting
If you encounter issues with your Aramox Shifter Lock Cover, refer to the following common problems and solutions:
Issue: The cover does not fit or is loose after installation.
- Possible Cause: Incorrect vehicle model or year. This part is specifically designed for CRV 2012 and 2014 models. Compatibility with other years or models is not guaranteed.
- Solution: Double-check your vehicle's make, model, and year against the product's specified fitment (CRV 2012, 2014). Verify that the OEM part number 77271-T0A-A01ZA matches the required part for your specific vehicle.
Issue: The cover appears to sit slightly lower or higher than the original component.
- Possible Cause: Minor manufacturing variations or design differences inherent in aftermarket replacement parts.
- Solution: While the part is designed to function correctly, slight aesthetic differences in profile may occur. Ensure the cover is fully seated and securely attached to confirm proper installation.
Specifications
| Feature | Detail |
|---|---|
| Brand | Aramox |
| Model Number | 77271-T0A-A01ZA |
| Color | Silver |
| Product Dimensions | 3.94"L x 3.94"W |
| Exterior Finish | Polished |
| Special Feature | Durable, Easy to Install |
| Included Components | 1 x Shifter Lock Cover |
| Item Weight | 0.317 ounces |
| Handle Material | Acrylonitrile Butadiene Styrene (ABS) |
| Handle Attachment Mechanism | Snap-on |
| Date First Available | April 25, 2020 |
Warranty Information
Specific warranty details for the Aramox Shifter Lock Cover are not provided in the product information. Please refer to the retailer or manufacturer's official website for any applicable warranty policies or contact customer support for further assistance.
Customer Support
For additional support, inquiries, or technical assistance regarding the Aramox Shifter Lock Cover, please contact the manufacturer or your point of purchase. Ensure you have your product model number (77271-T0A-A01ZA) and vehicle details ready when contacting support.
You may also visit the Aramox Store on Amazon for more product information.