Eoxsmile Digital Alarm Clock User Manual

1. Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your Eoxsmile Digital Alarm Clock, Model HOLA-CR1001E-B. Please read this manual thoroughly before using the device to ensure proper functionality and to maximize your user experience. Keep this manual for future reference.

2. Package Contents

Upon unpacking, please verify that all the following items are included in your package:

• Eoxsmile Digital Alarm Clock (HOLA-CR1001E-B)
• 5V 2A Power Adapter
• USB Power Cord
• User Manual
• 2 Black Holders (for stability)

Image: Contents of the Eoxsmile Digital Alarm Clock package.

3. Product Overview

Familiarize yourself with the various parts and controls of your alarm clock.

3.1 Front View

Image: Front view of the Eoxsmile Digital Alarm Clock.

The front features a large 7.5-inch LED display showing the time. Indicators for AM/PM, Alarm 1, Alarm 2, and DST (Daylight Saving Time) are also visible.

3.2 Top Panel Controls

The top panel houses the primary control buttons:

• SET Button: Used to enter time and alarm setting modes.
• ALARM 1 Button: Used to set and activate/deactivate Alarm 1.
• ALARM 2 Button: Used to set and activate/deactivate Alarm 2.
• UP Button: Adjusts values upwards during setting, or switches 12/24H format in normal time display.
• DOWN Button: Adjusts values downwards during setting, or activates/deactivates DST in normal time display.
• SNOOZE/SLEEP Button: Activates snooze during an alarm, or adjusts display brightness in normal time display.
• DIMMER Button: Cycles through display brightness levels.

Image: Top panel controls and key features.

3.3 Side and Rear Panel

The side and rear panels include essential ports and the battery compartment:

• USB Charging Port: For charging external devices.
• DC Jack: For connecting the power adapter.
• Volume +/- Buttons: Located on the side, used to adjust alarm volume.
• Battery Compartment: Holds 2 AAA batteries for backup.

Image: Rear panel with ports and battery compartment.

Image: Side panel with volume buttons.

4. Setup

4.1 Power Connection

1. Connect the provided USB power cord to the DC Jack on the back of the alarm clock.
2. Plug the 5V 2A power adapter into a standard electrical outlet.
3. The clock display will illuminate, indicating it is powered on.

4.2 Battery Installation (for Backup)

The clock requires 2 AAA batteries (not included) for backup purposes. These batteries preserve time and alarm settings during a power outage but do not power the display or USB charging function.

1. Open the battery compartment cover on the rear of the clock.
2. Insert 2 new AAA batteries, ensuring correct polarity (+ and -).
3. Close the battery compartment cover securely.

Image: Battery installation and power connection.

5. Operating Instructions

5.1 Setting the Time

1. In normal time display mode, press and hold the SET button for 3 seconds. The hour digits will begin to flash.
2. Use the UP or DOWN buttons to adjust the hour.
3. Press the SET button again to confirm the hour and move to minute setting. The minute digits will flash.
4. Use the UP or DOWN buttons to adjust the minutes.
5. Press the SET button a third time to confirm the minutes and exit time setting mode.

5.2 12/24 Hour Format Selection

In normal time display mode, briefly press the UP button to switch between 12-hour (with AM/PM indicator) and 24-hour formats.

5.3 Setting Alarms (Alarm 1 & Alarm 2)

The clock features two independent alarms.

1. Press and hold the ALARM 1 (or ALARM 2) button for 3 seconds. The hour digits for that alarm will flash.
2. Use the UP or DOWN buttons to adjust the alarm hour.
3. Press the ALARM 1 (or ALARM 2) button again to confirm the hour and move to minute setting. The minute digits will flash.
4. Use the UP or DOWN buttons to adjust the alarm minutes.
5. Press the ALARM 1 (or ALARM 2) button a third time to confirm the minutes and exit alarm setting mode.

5.4 Activating/Deactivating Alarms

After setting an alarm, briefly press the ALARM 1 (or ALARM 2) button to toggle it on or off. The corresponding alarm icon (bell symbol) on the display will light up when the alarm is active and turn off when deactivated.

5.5 Alarm Volume Adjustment

The alarm volume can be adjusted to 4 levels (70dB, 75dB, 80dB, 85dB).

1. During an active alarm, press the Volume +/- buttons located on the side of the clock to adjust the volume.
2. Alternatively, you can adjust the volume in normal time display mode by pressing the Volume +/- buttons.

5.6 Snooze Function

When an alarm sounds, press the large SNOOZE/SLEEP button on the top of the clock to temporarily silence the alarm for 9 minutes. The alarm will sound again after 9 minutes. To cancel the alarm completely, press the corresponding ALARM 1 or ALARM 2 button, or the Alarm Pause button (if available, otherwise the ALARM button). If no button is pressed, the alarm will automatically turn off after a set duration (e.g., 60 minutes).

5.7 Display Dimmer

The display has 5 adjustable brightness levels.

1. In normal time display mode, briefly press the DIMMER button to cycle through the 5 brightness levels.
2. Select the desired brightness level for your environment.

5.8 Daylight Saving Time (DST)

In normal time display mode, press and hold the DOWN button for 3 seconds to activate or deactivate DST. When activated, the DST indicator will appear on the display, and the time will adjust forward by one hour. Repeat the action to deactivate DST.

5.9 USB Charging Port

The USB port on the rear of the clock can be used to charge compatible electronic devices (e.g., smartphones, tablets).

1. Ensure the alarm clock is connected to AC power.
2. Connect your device's USB charging cable to the USB port on the clock.
3. Charging will begin automatically.

6. Battery Backup Function

The 2 AAA batteries installed in the battery compartment serve as a backup power source. In the event of a power outage, these batteries will maintain the correct time and alarm settings. However, the clock display will go blank, and the USB charging function will not operate. The alarm will still sound at the scheduled time if a power outage occurs while the alarm is active.

7. Troubleshooting

If you encounter any issues with your Eoxsmile Digital Alarm Clock, please refer to the following common problems and solutions:

• Problem: The clock display is blank.
  Solution: Ensure the AC power adapter is securely plugged into both the clock and a working electrical outlet. If using battery backup, remember that batteries only maintain settings and do not power the display.
• Problem: The alarm does not sound.
  Solution: Verify that the alarm is activated (the bell icon should be lit on the display). Check the alarm volume settings using the side Volume +/- buttons. Ensure the alarm time is set correctly.
• Problem: Cannot set the time or alarm.
  Solution: Ensure you are pressing and holding the respective SET or ALARM button for 3 seconds to enter the setting mode. Briefly pressing these buttons will only toggle alarm activation or cycle through settings.
• Problem: USB charging is not working.
  Solution: Confirm that the alarm clock is connected to AC power, as the USB charging port requires main power to function. Check the USB cable and the device being charged for proper connection.

8. Specifications

9. Warranty and Support

Your Eoxsmile Digital Alarm Clock is covered by an 18-month warranty. For any questions, technical assistance, or warranty claims, please contact Eoxsmile customer support. We are committed to providing lifetime customer support for our products.

For further assistance, please refer to the contact information provided on the product packaging or the official Eoxsmile website.