OMNIHIL Power Cord User Manual

Introduction

This manual provides essential information for the safe and effective use of your OMNIHIL 8-foot AC Power Cord, compatible with AEIUSNY UPS-500AD. Please read this manual thoroughly before use and retain it for future reference.

Safety Information

• Ensure the power cord is fully inserted into both the power source and the device.
• Do not use the power cord if it is damaged, frayed, or has exposed wires.
• Avoid placing heavy objects on the power cord or bending it sharply.
• Keep the power cord away from water, heat sources, and sharp edges.
• This product is designed for indoor use only.
• Disconnect the power cord from the outlet before cleaning or when not in use for extended periods.

Product Overview

The OMNIHIL 8-foot AC Power Cord is designed to provide reliable power to compatible devices, such as the AEIUSNY UPS-500AD. It features a standard 3-prong male plug (Type B) on one end and a C13 female connector on the other, ensuring a secure connection.

Image: The OMNIHIL 8-foot AC Power Cord, showing both the 3-prong male plug and the C13 female connector.

This power cord is UL Listed and RoHS certified, indicating compliance with safety and environmental standards. It is an 8-foot (96 inches) long cable, providing ample reach for various setups.

Setup

1. Identify the Power Input: Locate the power input port on your device (e.g., AEIUSNY UPS-500AD). This port typically matches the C13 female connector of the power cord.
2. Connect to Device: Insert the C13 female connector of the OMNIHIL power cord firmly into the device's power input port.
3. Connect to Power Outlet: Insert the 3-prong male plug of the power cord into a standard, grounded AC power outlet. Ensure the outlet provides the correct voltage for your device.
4. Secure Connections: Verify that both ends of the power cord are securely connected to prevent accidental disconnections.

Image: A close-up view of the power cord's connectors, illustrating the male and female ends.

Operating

Once the OMNIHIL power cord is securely connected to both your device and a power outlet, your device should receive power. Follow the operating instructions provided with your specific device (e.g., AEIUSNY UPS-500AD) to power it on and use its functions.

Maintenance

• Cleaning: To clean the power cord, disconnect it from both the device and the power outlet. Wipe the cord with a dry, soft cloth. Do not use liquid cleaners or immerse the cord in water.
• Storage: When not in use, coil the power cord loosely. Avoid tight coiling or kinking, which can damage the internal wires. Store in a cool, dry place.
• Inspection: Periodically inspect the power cord for any signs of wear, cuts, or damage to the insulation or connectors. If damage is found, discontinue use immediately and replace the cord.

Troubleshooting

If your device is not receiving power after connecting the OMNIHIL power cord, consider the following:

• Check Connections: Ensure both ends of the power cord are fully and securely plugged into the device and the wall outlet.
• Verify Power Outlet: Test the wall outlet with another known working appliance to confirm it is supplying power.
• Inspect Cord for Damage: Visually inspect the entire length of the power cord for any visible damage, such as cuts, kinks, or frayed insulation. If damaged, replace the cord.
• Device Power Switch: Confirm that the power switch on your device is in the "On" position.

If the issue persists after these steps, consult the user manual for your specific device or contact OMNIHIL customer support.

Specifications

Warranty and Support

This OMNIHIL power cord comes with a 5-Year Free Replacement Warranty. For warranty claims or technical support, please refer to the contact information provided with your purchase or visit the official OMNIHIL website.

Image: A circular logo indicating a 5-year warranty.