1. Introduction
This manual provides essential instructions for the assembly, operation, and maintenance of your Haus Bar Stool. Please read this manual thoroughly before assembly and retain it for future reference. Proper assembly and care will ensure the longevity and safety of your product.
2. Safety Information
Always follow these safety guidelines to prevent injury or damage to the product:
- Ensure all components are present and undamaged before beginning assembly.
- Assemble the stool on a soft, clean surface to prevent scratching.
- Tighten all screws and bolts securely. Periodically check and re-tighten fasteners.
- Do not stand on the stool. It is designed for seating only.
- Do not exceed the maximum weight capacity (refer to specifications).
- Keep children away from the assembly area. Small parts can be a choking hazard.
- Avoid exposing the stool to direct sunlight or extreme temperatures to prevent material degradation.
3. Package Contents
Verify that all parts listed below are included in your package. If any parts are missing or damaged, contact customer support immediately.
- A. Padded Seat (1)
- B. Leg Frame Assembly (1)
- C. Hardware Pack (Screws, Washers, Allen Wrench) (1)
Figure 1: Front view of the assembled Haus Bar Stool. This image displays the overall design, including the dark gray padded seat and the wooden leg structure.
Figure 2: Side profile of the Haus Bar Stool. This view highlights the ergonomic curve of the seat and backrest, as well as the sturdy construction of the wooden legs.
4. Setup and Assembly
Follow these steps carefully for proper assembly:
- Unpack Components: Carefully remove all parts from the packaging. Place them on a soft, flat surface to prevent damage.
- Attach Seat to Frame: Align the pre-drilled holes on the underside of the padded seat (A) with the holes on the top of the leg frame assembly (B).
- Secure with Screws: Insert the provided screws from the hardware pack (C) through the frame and into the seat. Hand-tighten all screws initially.
- Final Tightening: Once all screws are in place, use the Allen wrench (C) to fully tighten all fasteners. Do not overtighten.
- Stability Check: Gently rock the stool to ensure it is stable. If it wobbles, check that all screws are evenly tightened.
Figure 3: Detail of the padded seat. This image shows the texture and stitching of the dark gray upholstery, which is a key component for assembly.
5. Operation (Usage)
The Haus Bar Stool is designed for comfortable seating at bar-height surfaces. Ensure the stool is placed on a flat, stable surface before use. Sit gently and distribute your weight evenly. Avoid sudden movements or leaning excessively to one side.
6. Maintenance and Care
- Cleaning the Seat: For the dark gray padded seat, wipe with a soft, damp cloth. For stubborn stains, use a mild soap solution and immediately wipe dry. Avoid abrasive cleaners or harsh chemicals.
- Cleaning the Wood Frame: Dust the walnut-stained oak legs with a soft, dry cloth. For deeper cleaning, use a wood-specific cleaner and follow its instructions. Avoid excessive moisture.
- Fastener Check: Periodically (every 3-6 months) check all screws and bolts to ensure they remain tight. Re-tighten as necessary to maintain stability.
- Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause fading or damage to both the upholstery and wood finish.
- Avoid Excessive Moisture: Protect the stool from spills and high humidity, which can damage the wood and upholstery.
Figure 4: Connection point detail. This image illustrates how the padded seat meets the wooden frame, important for understanding cleaning and maintenance of this joint.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Stool wobbles after assembly. | Screws are not tightened evenly or fully. | Place the stool on a flat surface. Loosen all screws slightly, then re-tighten them evenly and firmly. |
| Scratches on the wood frame. | Impact or abrasion during use or assembly. | Minor scratches can be touched up with a wood repair marker or polish matching the walnut tone. |
| Upholstery appears stained or dirty. | Accumulation of dirt or spills. | Clean with a soft, damp cloth and mild soap solution. Wipe dry immediately. Avoid harsh chemicals. |
8. Specifications
- Model: Banco Alto para Barra
- Brand: Haus
- Color: Dark Gray (seat), Walnut Tone (legs)
- Frame Material: Walnut Wood (Encino Tono Nogal - Oak with Walnut Stain)
- Seat Material: Padded Upholstery
- Style: Modern with rustic touches
- ASIN: B087N7THFJ
- Dimensions: (Specific dimensions not provided in source, placeholder for typical manual) Approximately 40 cm (W) x 45 cm (D) x 95 cm (H) - This is an estimation, actual dimensions may vary.
- Weight Capacity: (Not provided in source, placeholder for typical manual) Up to 120 kg (265 lbs) - This is an estimation, actual capacity may vary.
Figure 5: Rear view of the bar stool. This image provides a perspective of the backrest and the stability of the leg design from behind.
9. Warranty and Support
Haus products are manufactured with quality and durability in mind. For specific warranty information, please refer to the warranty card included with your purchase or visit the official Haus website. If you encounter any issues or require assistance, please contact Haus customer support with your product model and purchase details.
Contact Information: (Not provided in source, typically found on product packaging or official website)
