Milliard Deluxe Pool Vacuum Head

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

Milliard Deluxe Pool Vacuum Head

Instruction Manual

Model: Deluxe Pool Vacuum Head

Product Overview

The Milliard Deluxe Pool Vacuum Head is designed for efficient cleaning of both inground and above-ground swimming pools. Its weighted, triangular design ensures it remains at the bottom of the pool and allows for easy maneuverability around corners and walls. Equipped with specialized brushes, it provides thorough cleaning in hard-to-reach areas.

Milliard Deluxe Pool Vacuum Head, top view

Image: Top view of the Milliard Deluxe Pool Vacuum Head, showcasing its triangular shape and brush placement.

Key Features:

  • Weighted Design: Ensures the vacuum head sinks and stays at the bottom for consistent cleaning.
  • Triangular Shape: Facilitates easy navigation and cleaning along pool corners and walls.
  • Specialty Corner Brushes: Angled bristle sets provide effective cleaning in tight spaces.
  • Universal Fit: Compatible with standard 1.25" and 1.5" vacuum hoses and extension poles.
  • Durable Bristles: Features 12 sets of Polypropylene bristles for effective scrubbing.

Setup Instructions

  1. Attach Vacuum Hose: Connect your standard 1.25" or 1.5" pool vacuum hose to the central port on top of the vacuum head. Ensure a snug fit to prevent loss of suction.
  2. Close-up of the vacuum head port showing compatibility with 1.25 and 1.5 inch hoses

    Image: Close-up view of the vacuum head's hose port, indicating compatibility with 1.25" and 1.5" hoses.

  3. Connect to Extension Pole: Attach the handle of the vacuum head to a standard extension pole. The spring-loaded locking clips will secure the connection.
  4. Submerge in Pool: Carefully lower the vacuum head into the pool, allowing it to fill with water and sink to the bottom. This prevents air from being trapped, which can affect suction.

Operating Instructions

Once the vacuum head is properly set up and submerged, you can begin the cleaning process.

  1. Start Vacuuming: With your pool pump and filter system running in vacuum mode, slowly move the vacuum head across the pool floor. The weighted design ensures it stays in contact with the surface.
  2. Milliard Deluxe Pool Vacuum Head being used in a swimming pool

    Image: The Milliard Deluxe Pool Vacuum Head in action, cleaning the floor of a swimming pool.

  3. Clean Corners and Walls: Utilize the triangular shape and specialty corner brushes to effectively clean tight corners and along the pool walls. The angled bristles are designed to sweep debris into the suction path.
  4. Close-up of the angled brushes on the vacuum head designed for corner cleaning

    Image: Detail of the vacuum head showing the angled brushes specifically designed for effective corner cleaning.

  5. Overlap Strokes: For comprehensive cleaning, overlap your vacuuming strokes slightly to ensure no areas are missed.

Maintenance

Proper maintenance will extend the life of your Milliard Deluxe Pool Vacuum Head.

  • Rinse After Use: After each use, rinse the vacuum head thoroughly with fresh water to remove any chlorine, debris, or chemical residues.
  • Inspect Brushes: Periodically inspect the Polypropylene bristles for wear or damage. While durable, excessive force or abrasive surfaces can cause wear over time.
  • Storage: Store the vacuum head in a cool, dry place away from direct sunlight and harsh chemicals when not in use.

Troubleshooting

If you encounter issues while using your vacuum head, consider the following common solutions:

  • Poor Suction:
    • Ensure the vacuum hose is securely attached to both the vacuum head and the skimmer/vacuum port.
    • Check for air leaks in the hose or connections.
    • Verify that the pool pump is operating correctly and the filter is clean.
    • Ensure the vacuum head is fully submerged and no air is trapped inside.
  • Difficulty Maneuvering:
    • Confirm the extension pole is securely attached and not flexing excessively.
    • Ensure the pool floor is free of large debris that might obstruct movement.

Specifications

Size guide for Milliard Deluxe Pool Vacuum Head showing 11 inch width and 3 inch height

Image: Size guide illustrating the dimensions of the Milliard Deluxe Pool Vacuum Head.

Product Specifications
BrandMilliard
ModelDeluxe Pool Vacuum Head
ColorBlue, Grey, White
Handle MaterialPlastic
MaterialNylon, Polypropylene
Special FeatureReusable
ShapeTriangular
Surface RecommendationWalls (and floors)
Number of Brush Sets12
Item Weight1 Pounds
Package Dimensions14.17 x 12.64 x 3.7 inches
UPC840985118204
ASINB087LKW29Q

Warranty and Customer Support

Milliard is committed to providing quality products and excellent customer service. For any questions, concerns, or warranty inquiries regarding your Deluxe Pool Vacuum Head, please contact Milliard customer support.

You can typically find contact information on the product packaging or on the official Milliard website. Please have your product model and purchase details ready when contacting support.

"When you purchase Milliard, you can relax knowing you have a dedicated team of real people ready to help you with any questions or concerns you may have. We are known for our 5-star customer service and are happy to help you with anything you may need."

© 2024 Milliard. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.