TCP Eco$ave LED A19 Light Bulb Instruction Manual

1. Introduction

This manual provides instructions for the TCP Eco$ave LED A19 Light Bulbs. These 8.5-watt LED bulbs are designed to replace traditional 60-watt incandescent bulbs, offering 730 lumens of Soft White (3000K) light. They feature a shatter-resistant design and an average lifespan of 6,000 hours. This product is non-dimmable.

Image 1.1: TCP Eco$ave LED A19 Soft White Light Bulb. This image shows the main product, a single TCP Eco$ave LED A19 bulb, highlighting its standard shape and soft white appearance.

2. Safety Information

• Risk of Electric Shock: Always turn off power to the fixture at the switch and circuit breaker before installation, removal, or inspection.
• Non-Dimmable: These bulbs are not designed for use with dimmers. Using them with a dimmer switch may cause flickering, damage to the bulb, or premature failure.
• Indoor Use Only: Suitable for dry locations. Do not use where directly exposed to water.
• Operating Temperature: Do not install in enclosed fixtures that restrict airflow, as this may shorten bulb life.
• Weight: Ensure the fixture can support the weight of the bulb.
• Disposal: Dispose of bulbs according to local regulations.

3. Product Features

• Energy Efficient: Consumes only 8.5 watts, replacing a 60-watt incandescent bulb.
• Long Lifespan: Provides approximately 6,000 hours of light, reducing the frequency of bulb replacement.
• Soft White Light: Emits a 3000K color temperature, creating a warm and inviting ambiance.
• Shatter Resistant: Designed for enhanced durability.
• Standard Base: Features an E26 medium screw base for compatibility with most standard fixtures.

Image 3.1: Energy Efficiency. This image illustrates the energy savings, showing a hand holding an LED bulb near a lamp with text indicating "80% LESS ENERGY", emphasizing the product's efficiency.

Image 3.2: Soft White Color. This image shows a hand installing a bulb into a lamp, with text overlay "SOFT WHITE COLOR", demonstrating the bulb's light color characteristic.

Image 3.3: Color Temperature Comparison. This image displays a comparison of different LED light color temperatures, showing how Soft White (2700K/3000K) and Daylight (5000K/6000K) appear in various settings, helping users understand the visual effect of the 3000K Soft White bulb.

4. Specifications

5. Setup and Installation

1. Turn Off Power: Before beginning installation, ensure the power to the light fixture is completely off at both the wall switch and the circuit breaker.
2. Remove Old Bulb: If replacing an existing bulb, carefully unscrew the old bulb from the socket. Allow it to cool if it was recently in use.
3. Install New Bulb: Gently screw the TCP Eco$ave LED A19 bulb into the empty E26 medium screw base socket. Turn clockwise until it is finger-tight. Do not overtighten.
4. Restore Power: Once the bulb is securely installed, restore power at the circuit breaker and then turn on the wall switch.

Image 5.1: Bulb Installation. This image shows a hand carefully screwing an LED bulb into a light fixture, demonstrating the installation process.

6. Operating Instructions

Operating the TCP Eco$ave LED A19 light bulb is straightforward:

1. Ensure the bulb is correctly installed in a compatible E26 socket.
2. Turn on the light switch connected to the fixture to illuminate the bulb.
3. Turn off the light switch to extinguish the bulb.

Note: These bulbs are non-dimmable. Do not attempt to use them with dimmer switches.

7. Maintenance

The TCP Eco$ave LED A19 light bulbs require minimal maintenance:

• Cleaning: To clean the bulb, ensure the power is off and the bulb is cool. Wipe gently with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
• No User Serviceable Parts: The bulb contains no user-serviceable parts. Do not attempt to open or repair the bulb.
• Replacement: Replace the bulb when it reaches the end of its operational life.

8. Troubleshooting

If you encounter issues with your TCP Eco$ave LED A19 light bulb, refer to the following common solutions:

• Bulb Does Not Light:
  • Ensure the power to the fixture is on at both the wall switch and the circuit breaker.
  • Verify the bulb is screwed in securely into the socket.
  • Test the bulb in a different, known-working fixture to confirm if the bulb or the fixture is the issue.
• Bulb Flickers:
  • Confirm that the bulb is not being used with a dimmer switch. These bulbs are non-dimmable.
  • Check for loose connections in the fixture or wiring.
• Bulb Life is Shorter Than Expected:
  • Ensure the bulb is not installed in an enclosed fixture that traps heat, as this can reduce lifespan.
  • Verify the operating voltage is within the specified range (120 Volts).

9. Warranty and Support

This TCP Eco$ave LED A19 Light Bulb comes with a 1-year manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.

For warranty claims, technical assistance, or further inquiries, please contact TCP customer support. Keep your proof of purchase for warranty validation.

For more information, visit the official TCP Store.