Monster Power Surge Protector Model 5005 Instruction Manual

Introduction

This manual provides instructions for the safe and effective use of your Monster Power Surge Protector, Model 5005. This device is designed to protect your electronic equipment from power surges and spikes, offering multiple outlets and specialized ports for comprehensive protection.

Safety Instructions

Please read all safety instructions before using this product. Failure to follow these instructions may result in electric shock, fire, or damage to the product or connected equipment.

• Indoor Use Only: This surge protector is intended for indoor use in dry locations only. Do not expose to moisture or water.
• Electrical Rating: Do not exceed the electrical rating of 120V AC, 15A, 1800W.
• Grounding: Ensure the wall outlet is properly grounded. The surge protector must be plugged into a grounded 3-prong outlet.
• Overload Protection: Do not plug in appliances that draw more power than the unit's rating. Overloading may cause the circuit breaker to trip.
• Fireproof MOV and Dual Mode Technology: This unit incorporates Fireproof MOV (Metal Oxide Varistor) and Dual Mode Technology for enhanced safety, designed to prevent fire risks and protect against power overloads.
• ETL Listed: This product is ETL Listed, indicating it meets national safety standards for electrical products.
• Indicator Lights: Regularly check the 'Protected' and 'Grounded' indicator lights. If the 'Protected' light is off, the surge protection has been expended, and the unit should be replaced. If the 'Grounded' light is off, the wall outlet may not be properly grounded.

Product Features

The Monster Power Surge Protector Model 5005 offers comprehensive protection and connectivity for your electronic devices.

• Surge Protection: Rated at 4,050 Joules to protect against power surges and spikes.
• Power Outlets: 8 standard 120V AC outlets for various electronic devices.
• USB Charging Ports: Includes 1 USB-A port and 1 USB-C port for charging compatible devices.
• Coaxial Protection: 2 Coax IN/OUT ports to protect cable boxes, satellite receivers, and other coaxial-connected equipment.
• Ethernet Protection: 5 Ethernet IN/OUT ports to protect network-connected devices from surges.
• Cable Length: Features a 6-foot power cord with a right-angle plug for flexible placement and improved wire management.
• Indicator Lights: Dedicated LED lights for 'Protected' and 'Grounded' status.
• Durable Housing: Constructed with a robust plastic housing for long-term durability.

Image: Top-down view of the Monster Power Surge Protector Model 5005, showcasing its 8 AC outlets, USB-A and USB-C charging ports, Coax ports, and Ethernet ports. The 'Protected' and 'Grounded' indicator lights are visible.

Image: An angled view of the Monster Power Surge Protector, highlighting the wide-spaced AC outlets, the 6-foot cord, and the angled flat plug designed for easier wire organization. Text overlays indicate 'Wide Spaced Outlets with Angled Flat Plug' and '6 FOOT STRAIGHT PLUG', '2X Ethernet Ports'.

Image: A close-up view of the Monster Power Surge Protector, emphasizing its safety features. Icons for 'Fireproof MOV', 'Dual Mode', and '4050 Joules' are displayed, along with the text 'Equipment Protection from Overloads and Surges' and '4050 Joules Surge Protection Rating'.

Installation and Setup

1. Placement: Position the surge protector in a dry, indoor location, away from heat sources and direct sunlight. The mountable design allows for secure installation if desired.
2. Connect to Wall Outlet: Plug the surge protector's 6-foot power cord into a standard, properly grounded 120V AC wall outlet. The right-angle plug helps with wire management in tight spaces.
3. Verify Grounding and Protection: Once plugged in, check the 'Protected' and 'Grounded' LED indicator lights on the unit. Both lights should illuminate, indicating that the surge protection is active and the outlet is properly grounded.
4. Connect Devices: Plug your electronic devices into the 8 AC outlets. For charging mobile devices, use the USB-A and USB-C ports.
5. Connect Coaxial Cables: For devices like cable boxes or satellite receivers, connect the incoming coaxial cable to the 'IN' Coax port and then connect a second coaxial cable from the 'OUT' Coax port to your device.
6. Connect Ethernet Cables: For network devices, connect the incoming Ethernet cable to an 'IN' Ethernet port and then connect a second Ethernet cable from an 'OUT' Ethernet port to your device.

Image: An illustration showing the Monster Power Surge Protector in use, with various devices plugged into its outlets and USB ports. The image highlights the ETL listing and the presence of 1A USB-A and 3A USB-C ports. A phone is shown charging via USB-C.

Image: A desk setup featuring two laptops and a monitor, with the Monster Power Surge Protector discreetly placed to manage power connections for multiple devices. This demonstrates a typical installation scenario.

Operation

Once properly installed, the Monster Power Surge Protector operates automatically to safeguard your electronics.

• Powering Devices: Simply plug your devices into the available AC outlets or USB charging ports.
• Indicator Lights:
  • The 'Protected' LED light indicates that the surge protection circuitry is active and functioning.
  • The 'Grounded' LED light indicates that the wall outlet is properly grounded.
• On/Off Switch: Use the integrated On/Off switch to control power to all connected AC outlets. The USB ports may remain active regardless of the switch position on some models.

Image: A close-up of the Monster Power Surge Protector's top panel, showing the illuminated 'Protected' and 'Grounded' LED indicator lights. The text '2 LED Indicator Lights' is visible, explaining that these lights confirm devices are surge-protected and grounded.

Maintenance

Minimal maintenance is required for this surge protector.

• Cleaning: Disconnect the unit from the wall outlet before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid or aerosol cleaners.
• Inspection: Periodically inspect the power cord and the unit for any signs of damage. If damage is found, discontinue use and replace the unit.

Troubleshooting

• No Power to Devices:
  • Ensure the surge protector is firmly plugged into a live wall outlet.
  • Check if the surge protector's On/Off switch is in the 'On' position.
  • Verify that the wall outlet itself is functioning by plugging in another device.
  • Check your home's circuit breaker panel to ensure no circuit has tripped.
• 'Protected' Light is Off:
  • This indicates that the surge protection components have absorbed a significant surge and are no longer providing protection. The unit should be replaced to ensure continued protection for your devices.
• 'Grounded' Light is Off:
  • This indicates that the wall outlet is not properly grounded. Consult a qualified electrician to inspect and correct the wiring of your wall outlet. The surge protector will still provide power, but without proper grounding, its surge protection capabilities may be compromised.

Specifications

Warranty and Support

This Monster Power Surge Protector is backed by a Limited Connected Equipment Policy.

• Limited Connected Equipment Policy: Monster will replace up to $500,000 worth of your equipment if it is damaged by a power surge or spike while properly connected to this surge protector. Refer to the official Monster website or product packaging for full terms and conditions of this policy.
• Customer Support: For technical assistance, warranty claims, or further information, please visit the official Monster website or contact Monster customer support directly.

Image: A visual comparison between the Monster Power Surge Protector and a generic power strip, highlighting the Monster unit's superior 4050 Joules rating, ETL certification, and Clean Power features. The image also mentions the 'Limited Connected Equipment Policy' of up to $500,000.