1. Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Broan-NuTone AER110LTK Energy Star Certified Bath Fan with LED Light. Please read this manual thoroughly before installation and use to ensure proper function and safety.
2. Safety Information
Always follow basic safety precautions when installing or using this appliance to reduce the risk of fire, electric shock, or injury to persons.
- Disconnect power at the service panel before installation or servicing.
- All wiring must be performed by a qualified electrician in accordance with all applicable codes and standards.
- Do not use this fan with any solid-state speed control device unless specifically approved.
- This unit is designed for general ventilating use only. Do not use to exhaust hazardous or explosive materials and vapors.
- To prevent motor damage and noisy/unbalanced impellers, keep drywall spray, construction dust, etc., off power unit.
3. Package Contents
Verify that all components are present before beginning installation.
Figure 3.1: Exploded view of the Broan-NuTone AER110LTK bath fan components, including the fan housing, duct connector, mounting brackets, LED light panel, and three interchangeable trim kits (white, brushed bronze, brushed nickel).
- Fan Housing Assembly
- Duct Connector
- Mounting Brackets/Hardware
- LED Light Panel
- Trim Kit (White, Brushed Bronze, Brushed Nickel options)
- Wireless In-Wall Remote Control
4. Setup and Installation
The Broan-NuTone AER110LTK fan is designed for easy room-side installation, eliminating the need for attic access in many retrofit situations. However, familiarity with electrical and ductwork is recommended. If unsure, consult a qualified professional.
4.1 Tools Required
- Safety Glasses
- Drywall Saw
- Screwdriver
- Hammer
- Tape Measure
4.2 Installation Steps (Room-Side)
- Prepare the Opening: Use the provided template on the product packaging to cut the appropriate size hole in the ceiling. The template dimensions are 10.5" x 9.75". Ensure the orientation is correct for duct connection.
- Mount the Housing: For retrofit installations, fold the mounting ears back. Slide the fan housing into the ceiling hole. Secure the housing to the ceiling structure by driving screws through the housing wall. For new construction, use the mounting ears to attach directly to the ceiling joists.
- Connect Ductwork: Attach the duct connector to the fan housing. Connect the existing or new ductwork to the connector, ensuring a tight seal with foil tape. The Easy-Duct connector allows for room-side installation without attic access.
- Electrical Connection: Connect the electrical wiring to the fan. All electrical connections must comply with local codes.
- Install Blower Assembly: Insert the blower assembly into the housing and secure it with the provided screws.
- Install LED Light Panel: Connect the LED light panel to the electrical connector. Carefully position the light panel and secure it.
- Attach Trim Kit: Choose your desired trim (White, Brushed Bronze, or Brushed Nickel) and snap it into place over the light panel.
Figure 4.1: A close-up view of the Broan-NuTone AER110LTK bath fan installed in a ceiling, showcasing its integrated LED light and sleek, low-profile design.
Video 4.1: Official Broan-NuTone product video demonstrating the features and installation process of the Roomside Series Decorative Bathroom Exhaust Fan. This video highlights the ease of installation from the room side and the versatile design options.
5. Operating Instructions
Your Broan-NuTone AER110LTK fan can be operated using the included wireless in-wall remote control or the ChromaComfort™ smartphone app.
5.1 Wireless In-Wall Remote Control
The remote allows control over the fan, LED light, and color settings. It is battery-powered and connects via Bluetooth.
- Fan Control: Press the fan icon button to turn the ventilation fan ON or OFF.
- Light Control: Press the light bulb icon button to turn the main LED light ON or OFF.
- Color Control: Use the color adjustment buttons (arrows or specific color icons) to cycle through the available RGB color themes or adjust brightness.
- Bluetooth Pairing: To pair the remote, hold down the designated pairing button (refer to the remote's specific instructions for exact location, often a small recessed button) until the fan's light indicates pairing mode.
5.2 ChromaComfort™ Smartphone App
Download the ChromaComfort™ app from the App Store or Google Play to access advanced color settings and control the fan from your smartphone.
- App Features:
- Choose from pre-set color scenes or create personalized settings.
- Select "Energize" to wake up or "Relax" to unwind.
- Create custom color sequences.
- Control fan and light functions remotely.
- App Pairing: Follow the in-app instructions to pair your device with the fan.
6. Maintenance
Regular maintenance ensures optimal performance and longevity of your bath fan. Always disconnect power before servicing.
- Cleaning the Light Panel and Trim: Wipe the LED light panel and trim with a soft, damp cloth. Do not use abrasive cleaners.
- Cleaning the Fan Grille: Periodically remove the trim and light panel to access the fan grille. Use a vacuum cleaner with a brush attachment to remove dust and debris.
- Motor Maintenance: The motor is permanently lubricated and requires no oiling. Keep the motor free of dust and debris.
7. Troubleshooting
If your fan is not operating correctly, refer to the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not operate. | No power to the unit; loose wiring; faulty remote. | Check circuit breaker/fuse. Ensure all wiring connections are secure. Replace remote batteries. |
| Light does not turn on. | No power to the unit; faulty LED module; faulty remote. | Check power. If LED module is faulty, contact customer support for replacement. Replace remote batteries. |
| Fan is noisy. | Loose mounting; debris in fan blades; motor issue. | Ensure fan housing is securely mounted. Clean fan blades. If noise persists, contact customer support. |
| LED light flickers. | Faulty LED module; electrical instability. | Contact customer support for LED module replacement. Consult an electrician to check electrical supply. |
| Bluetooth connection issues. | Remote/app not paired; interference; low battery. | Re-pair remote/app. Ensure no strong interference sources. Replace remote batteries. |
8. Specifications
| Feature | Detail |
|---|---|
| Model | AER110LTK |
| Air Flow Capacity | 110 CFM (Cubic Feet Per Minute) |
| Sound Level | 1.5 Sones (approximately 30 Decibels) |
| Room Size Recommendation | Up to 105 sq. ft. |
| Light Source | Integrated Dimmable LED Module (RGB Color Options) |
| Light Output | 1100 Lumens |
| Wattage | 26 Watts |
| Voltage | 120 Volts |
| Installation Type | Room Side Mount (New Construction & Retrofit) |
| Housing Dimensions | 9.25" x 10" x 5.75" (L x W x H) |
| Product Dimensions | 12"L x 12"W x 8"H (with trim) |
| Certification | ENERGY STAR Certified, UL Listed for use in insulated ceilings (Type IC) |
| Control Method | Wireless In-Wall Remote, ChromaComfort™ Smartphone App |
| Material | Polycarbonate, Alloy Steel |
| Included Components | Bath Fan, LED Light, Trim Kit (White, Brushed Bronze, Brushed Nickel), Wireless Remote |
9. Warranty and Support
This Broan-NuTone AER110LTK bath fan is backed by a three-year limited warranty. For warranty claims, technical support, or replacement parts, please contact Broan-NuTone customer service.
- Manufacturer: Broan-NuTone
- Website: www.broan-nutone.com
- Phone: Refer to the manufacturer's website for current contact numbers.
