1. Product Overview
The THERMOBIO Touchless Infrared Forehead Thermometer is a medical-grade device designed for accurate and hygienic temperature measurement for adults, children, and babies. It utilizes advanced infrared technology to provide instant results without physical contact.
Key features include:
- Superior performance with the latest smart chip and optimized algorithm for precise measurements.
- Three ultra-sensitive sensors ensure accurate results.
- Long-term reliability, tested for over 1000 hours of usage.
- High accuracy with over 150 data points collected per second.
- User-friendly features: 30-second auto power-off, 32-measurement memory storage, object/body temperature switch, sound toggle, and fever alert system.
Figure 1.1: The THERMOBIO Touchless Infrared Forehead Thermometer, showing the device, its packaging, included AAA batteries, and the user manual.
2. Setup
2.1 Unpacking and Initial Inspection
Carefully remove all components from the packaging. Ensure the following items are present:
- 1x THERMOBIO Infrared Thermometer
- 2x AAA Batteries
- 1x Instruction Manual (this document)
Inspect the thermometer for any visible damage. If any components are missing or damaged, contact customer support immediately.
Figure 2.1: What's included in the box: Thermometer, User Manual, Quick Start Guide, and 2x AAA batteries.
2.2 Battery Installation
- Locate the battery compartment cover at the bottom of the thermometer handle.
- Slide the cover open in the direction indicated by the arrow.
- Insert the two AAA batteries, ensuring the correct polarity (+ and -) as marked inside the compartment.
- Close the battery compartment cover securely until it clicks into place.
Note:
- Always use new AAA batteries.
- Remove batteries if the device will not be used for an extended period to prevent leakage.
3. Operating Instructions
3.1 Powering On/Off
To power on the thermometer, simply press the measurement trigger button located on the handle. The device will automatically power off after 30 seconds of inactivity to conserve battery life.
3.2 Taking a Temperature Measurement
The THERMOBIO thermometer is designed for non-contact measurement. For accurate readings:
- Ensure the thermometer is in the correct mode (Body Mode for human temperature, Object Mode for surface temperature). Use the O/B button to switch between modes.
- Aim the thermometer at the center of the forehead from a distance of 1-2 inches (2-5 cm). Ensure there is no hair, sweat, or cosmetics obstructing the measurement area.
- Press and release the measurement trigger button.
- The temperature reading will be displayed on the screen within 1 second.
Figure 3.1: Aim, Press, Read - Instant Results. The thermometer provides quick and accurate readings from 1-2 inches away.
Figure 3.2: Object & Body Mode. This versatile thermometer can be used to accurately measure the temperature of both objects and humans.
3.3 Understanding the Display and Buttons
Figure 3.3: High Resolution Display & Easy to Use Controls. All thermometer settings can be easily controlled using the intuitive quick press buttons under the high resolution display.
- Temperature Indicator: Displays the measured temperature.
- Sound Indicator: Shows if the sound is enabled or disabled.
- Memory Indicator: Indicates memory storage function.
- Object Measurement Mode: Icon for measuring object temperatures.
- Body Measurement Mode: Icon for measuring body temperatures.
- Battery Indicator: Shows current battery level.
- Temperature Unit (°C/°F) Toggle Button: Press to switch between Fahrenheit and Celsius.
- Sound Toggle Button: Press to turn the sound on or off.
- Memory Button (M): Press to access stored measurements. The thermometer can store up to 32 measurements.
- Object/Body Measurement Toggle Button (O/B): Press to switch between body and object measurement modes.
3.4 Fever Alert System
The thermometer features an intelligent dual-mode fever alarm system that provides color-coded results for quick interpretation:
- Green: Normal temperature.
- Orange: Low fever.
- Red: High fever.
Figure 3.4: Intelligent Dual Mode Fever Alarm™. Instantly take temperature readings and receive the results in a color coded alarm system.
4. Maintenance
4.1 Cleaning the Thermometer
To ensure accurate readings and hygiene, clean the thermometer regularly:
- Use a soft cloth slightly dampened with 70% isopropyl alcohol to wipe the thermometer body.
- For the probe and lens, use a cotton swab or a soft cloth dampened with alcohol. Gently wipe the surface.
- Do not immerse the thermometer in water or any other liquid.
- Do not use abrasive cleaning agents, thinners, or benzene for cleaning.
- Allow the thermometer to air dry completely before storage or next use.
4.2 Storage
Store the thermometer in a cool, dry place, away from direct sunlight, dust, and extreme temperatures. Keep it out of reach of children.
5. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Thermometer does not power on. | Batteries are dead or incorrectly installed. | Check battery polarity or replace with new AAA batteries. |
| Inaccurate readings. | Dirty sensor lens; incorrect measurement distance; environmental factors (e.g., drafts). | Clean the sensor lens. Ensure correct distance (1-2 inches) and stable environment. Allow thermometer to acclimate to room temperature for 30 minutes if moved from a different environment. |
| "Lo" or "Hi" displayed. | Temperature is outside the measurable range. | Ensure the measurement is within the specified range for body (89.6-109.2°F) or object (32-212°F). |
| No sound. | Sound function is turned off. | Press the sound toggle button to turn the sound on. |
6. Specifications
| Feature | Detail |
|---|---|
| Model Number | 6297001583562 |
| Measurement Modes | Forehead / Object |
| Measurement Distance | 1 - 2 inches (2 - 5 cm) |
| Power Source | DC 3V, 2x AAA batteries (included) |
| Measurement Range | Forehead: 89.6 - 109.2 °F (32.0 - 42.9 °C) Object: 32 - 212 °F (0 - 100 °C) |
| Measurement Accuracy (Forehead) | ±0.4 °F / 0.2 °C within 95.0 - 107.6 °F (35 - 42 °C); ±0.5 °F (±0.3 °C) otherwise |
| Measurement Accuracy (Object) | ±1.8 °F / 1.0 °C within 59.0 °F - 140.0 °F (15 - 60 °C); ±3.6 °F / 2.0 °C otherwise |
| Display Resolution | 0.1 °F / 0.1 °C |
| Clinical Reproducibility | Within ±0.5 °F (±0.3 °C) |
| Special Features | Non-Contact, Backlit, Ultra Clear Screen, Fast Reading System, High Accuracy |
| Certifications | CE, FDA, FCC, RoHS |
| Dimensions | 6.5 x 4.06 x 2.17 inches |
| Weight | 7.76 ounces |
7. Warranty & Support
7.1 Warranty Information
This THERMOBIO thermometer comes with a hassle-free 12-month warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. It does not cover damage caused by misuse, accidents, unauthorized repairs, or normal wear and tear.
Please retain your proof of purchase for warranty claims.
7.2 Customer Support
For any questions, concerns, or technical assistance, please contact THERMOBIO customer support:
- Visit the THERMOBIO Store on Amazon for more information and contact options.
- Refer to the contact information provided in the physical instruction manual included with your product.