Introduction
Thank you for choosing the Yarra-Decor Bedside Table Lamp. This manual provides essential information for the safe and efficient use of your new lamp. Please read it thoroughly before setup and operation, and retain it for future reference.
Figure 1: Yarra-Decor Bedside Table Lamp, showcasing its compact design and flaxen fabric shade.
Setup Instructions
Follow these steps to assemble your Yarra-Decor Bedside Table Lamp:
- Unpack Components: Carefully remove all parts from the packaging. Ensure all components listed below are present.
Figure 2: All components included in the package, ready for assembly.
- Unscrew Fixing Ring: Locate the lamp holder and unscrew the fixing ring from it.
- Fix Lamp Shade: Place the lamp shade onto the lamp holder.
- Tighten Fixing Ring: Secure the lamp shade by tightening the fixing ring back onto the lamp holder.
- Install Bulb: Screw the included E26 LED bulb into the lamp holder.
Figure 3: Visual guide for lamp assembly, from unscrewing the ring to installing the bulb.
- Connect to Power: Plug the lamp's power cord into a standard 110V electrical outlet.
Included Components:
- 1 x Yarra-Decor Bedside Table Lamp (Base with USB ports, Lamp Holder, Shade)
- 1 x E26 LED Bulb (3000K Warm Light, 600 Lumens, 6 Watts)
Operating Instructions
3-Way Dimmable Touch Control
The Yarra-Decor lamp features a convenient touch control system with three brightness levels:
- Low (35%): Ideal for a soft nightlight or creating a cozy, sleepy ambiance.
- Medium (60%): Provides comfortable light suitable for general relaxation or casual activities.
- High (100%): Bright light perfect for reading, working, or illuminating the room effectively.
To adjust the brightness, simply tap anywhere on the metal base of the lamp. Each tap will cycle through the brightness levels (Low → Medium → High → Off).
Figure 4: Demonstrates the 3-way dimmable feature, showing light intensity at different settings.
Practical USB Charging Ports
The lamp is equipped with two built-in USB charging ports (5V/2.1A) located on the base. These ports allow you to conveniently charge your electronic devices, such as mobile phones, e-readers, headsets, or other USB-powered gadgets.
The USB charging function operates whether the lamp is turned on or off, providing continuous power for your devices.
Figure 5: Illustration of the convenient USB charging ports on the lamp base.
Maintenance
To ensure the longevity and optimal performance of your Yarra-Decor Bedside Table Lamp, follow these maintenance guidelines:
- Cleaning: Disconnect the lamp from the power outlet before cleaning. Use a soft, dry cloth to wipe the lamp base and shade. Avoid using abrasive cleaners, solvents, or polishes as they may damage the finish.
- Bulb Replacement: Ensure the lamp is unplugged and the bulb has cooled down before attempting to replace it. Use only E26 base LED bulbs with a maximum wattage of 6W to maintain optimal performance and safety.
- General Care: Avoid placing the lamp in direct sunlight or in areas with high humidity. Do not expose the lamp to water or other liquids.
Troubleshooting
If you encounter any issues with your Yarra-Decor Bedside Table Lamp, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. |
|
|
| Touch control is unresponsive or inconsistent. |
|
|
| USB charging ports are not working. |
|
|
If the problem persists after trying these solutions, please contact Yarra-Decor customer support for assistance.
Product Specifications
| Feature | Detail |
|---|---|
| Brand | Yarra-Decor |
| Model Number | TD-001 |
| Product Dimensions | 13"D x 13"W x 25"H |
| Item Weight | 5.3 ounces (150 Grams) |
| Finish Type | Polished |
| Base Material | Metal |
| Shade Material | Fabric |
| Shade Color | Beige |
| Switch Type | Touch |
| Special Feature | 3-Way Dimmable |
| Light Source Type | LED |
| Bulb Base | E26 |
| Brightness | 600 Lumens |
| Color Temperature | 3000 Kelvin (Warm Light) |
| Wattage | 6 watts |
| Power Source | Corded Electric |
| Voltage | 110 Volts |
| Connectivity Technology | USB (2 x 5V/2.1A Type-A ports) |
| Indoor/Outdoor Usage | Indoor |
Figure 6: Key dimensions of the lamp and specifications of the included LED bulb.
Warranty and Support
For any product inquiries, technical support, or warranty claims, please contact Yarra-Decor customer service. Please have your model number (TD-001) and purchase information ready when contacting support.
You can visit the official Yarra-Decor store for more information and contact details: Yarra-Decor Store on Amazon.
