1. Introduction
The APEKX BE1032 True Wireless Earbuds are designed for an active lifestyle, offering a secure fit, high-quality stereo sound, and IPX7 waterproofing. This manual provides comprehensive instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your earbuds.
2. Package Contents
- Charging Box
- Headset (Earbuds)
- Charging Cable
- Earhooks (Standard)
- Small Earhooks (Alternative size)
- Packing Box
- User Manual
- Ear Caps (Multiple sizes)
3. Product Overview
Familiarize yourself with the components of your APEKX BE1032 earbuds and charging case.
Figure 3.1: APEKX BE1032 True Wireless Earbuds (Red) in their charging case. The earbuds feature ear hooks for a secure fit, and the case has LED indicators for battery status.
Figure 3.2: Diagram illustrating the 10 MM speakers for Hi-Fi Stereo Sound with dynamic treble and deep bass within the earbud.
Figure 3.3: Shows the ergonomic design of the earbuds with over-ear flexible hooks and comfort eartips available in Small, Medium, and Large sizes for a secure fit during activities.
4. Setup
4.1 Initial Charging
Before first use, fully charge the earbuds and the charging case. Place both earbuds into the charging case. Connect the charging cable to the case and a power source. The LED indicators on the case will show charging progress.
Figure 4.1: The charging case provides an additional 32 hours of playtime, extending the earbuds' 6 hours of single-charge playtime.
4.2 Bluetooth Pairing
The earbuds feature one-step pairing. Simply remove both earbuds from the charging case. They will automatically enter pairing mode. On your device (smartphone, tablet, laptop), enable Bluetooth and select "BE1032" from the list of available devices. Once connected, the earbuds are ready for use.
Figure 4.2: Illustrates the Bluetooth 5.3 instant connect feature, showing the earbuds successfully paired with a smartphone.
5. Operating Instructions
5.1 Basic Controls
The earbuds are equipped with tactile feedback buttons to prevent accidental touches.
- Play/Pause: Single press the button on either earbud.
- Next Track: Double press the button on the right earbud.
- Previous Track: Double press the button on the left earbud.
- Answer/End Call: Single press the button on either earbud during an incoming call.
- Reject Call: Press and hold the button on either earbud during an incoming call.
- Activate Voice Assistant: Triple press the button on either earbud.
5.2 Wearing the Earbuds
Select the appropriate ear cap size for a comfortable and secure fit. The over-ear hooks provide additional stability, making them ideal for sports and exercise.
Figure 5.1: The earbuds are IPX7 waterproof and sweatproof, suitable for intense workouts and outdoor activities.
6. Maintenance
To ensure the longevity and optimal performance of your earbuds, follow these maintenance guidelines:
- Cleaning: Regularly clean the earbuds and charging case with a soft, dry cloth. For ear caps, remove them and wash with mild soap and water, then dry thoroughly before reattaching.
- Storage: When not in use, store the earbuds in their charging case to protect them from dust and damage.
- Charging: Avoid overcharging. Disconnect the charger once the case and earbuds are fully charged.
- Water Exposure: While IPX7 waterproof, avoid submerging the earbuds for extended periods or exposing them to high-pressure water jets. Ensure the charging port is dry before charging.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Earbuds not pairing | Earbuds not in pairing mode; Bluetooth off on device; Interference. | Ensure earbuds are out of case and flashing; Turn device Bluetooth off/on; Move away from other wireless devices. |
| Only one earbud working | Earbuds not connected to each other; Low battery. | Place both earbuds back in case, then remove; Ensure both are charged. |
| Low volume/Poor sound quality | Incorrect ear cap size; Earbuds dirty; Device volume low. | Try different ear cap sizes; Clean earbuds; Increase device volume. |
| Earbuds falling out | Incorrect ear cap/hook size; Improper fit. | Experiment with different ear cap and ear hook sizes; Adjust placement in ear. |
| Charging case not charging | Faulty cable/adapter; Dirty charging port. | Try a different charging cable/adapter; Clean charging port. |
8. Specifications
- Model Name: BE1032 Sport Earbuds
- Brand: APEKX
- Connectivity Technology: Wireless (Bluetooth 5.0)
- Wireless Communication Technology: Bluetooth
- Ear Placement: In Ear
- Form Factor: Over Ear
- Noise Control: Sound Isolation
- Water Resistance Level: IPX7 Waterproof
- Battery Life (Earbuds): Up to 6 hours (single charge)
- Carrying Case Battery Average Life: Up to 22 hours additional playtime
- Charging Time: 1.5 Hours (earbuds)
- Bluetooth Range: 15 Meters
- Frequency Range: 20 Hz - 20 kHz
- Impedance: 16 Ohm
- Item Weight: 7.7 Grams (each earbud)
- Material: Plastic
- Control Type: Media Control (Tactile Feedback Button)
- Compatible Devices: Cellphones, Laptops, Tablets
- Recommended Uses: Cycling, Running, Exercising
- UPC: 615150778459
9. Warranty and Support
APEKX provides a 1-Year Assurance for your earbuds. Additionally, a 30-day no-questions-asked return policy is available. For timely support and any inquiries, please contact APEKX customer service. You can find contact information on the official APEKX website or through your purchase platform.
This product is sold by APEKX US and fulfilled by Amazon.