Introduction
Thank you for choosing the Bergmann Typhoon Digital Heavy-Duty Metal Tyre Inflator. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your device. Please read it thoroughly before first use and keep it for future reference.
Safety Information
- It is recommended to keep the car engine running while using the inflator to ensure maximum power supply to the device.
- Do not operate the inflator continuously for more than 10 minutes. Allow a 2-minute rest period between uses to prevent overheating.
- Ensure the inflator is placed on a stable, flat surface during operation.
- Keep children and pets away from the operating area.
- Do not expose the inflator to rain or wet conditions.
- Always check the recommended tire pressure for your vehicle, usually found on a sticker inside the driver's door jamb or in the vehicle's owner's manual.
- Disconnect the power cord from the car's 12V socket when not in use.
Package Contents
Please check the box for the following items:
- 1 x Bergmann Typhoon Digital Tyre Inflator
- 1 x Storage Bag
- 3 x Inflating Attachments (for bicycles, air beds, balls, etc.)
- 1 x Extra Fuse
- 1 x Warranty Card
- 1 x User Manual (this document)

Image: Included accessories such as various nozzle adapters for different inflation needs and a spare fuse.
Product Features
- Solid Metal Body: Durable, heavy-duty construction for reliability and better heat dissipation.
- Faster Inflation: Equipped with a 150W pure copper core motor for quick tire inflation.
- Digital Gauge with Auto Cut-Off: High-precision backlit digital display allows presetting desired pressure (PSI) and automatically stops inflation once reached.
- Large 30mm Cylinder: Contributes to faster inflation times compared to smaller cylinders.
- Bright LED Light: For illumination during use in dark or low-light conditions.
- Braided Rubber Air Hose: Heat-proof and durable for extended lifespan.
- Anti-Vibration Feet: Rubber feet reduce vibration and noise during operation.
- Long Power Cord: 3-meter cord to comfortably reach all tires.

Image: Benefits of a metal-body inflator over plastic, including low noise, superfast inflation, better heat radiation, and high durability.

Image: Illustration of a 100% pure copper motor, indicating higher efficiency and durability compared to aluminum motors.

Image: Visual representation of the superfast inflation time, capable of inflating a standard tire in approximately 2 minutes.

Image: The new-age speedometer-type digital gauge with preset and auto-shut-off functionality for precise inflation.

Image: Detail of the brass nozzle with special thermoplastic material designed for safety, preventing finger burns.

Image: Additional features including a bright LED light for visibility in the dark and anti-vibration rubber feet for stable operation.
Setup
- Prepare Your Vehicle: Park your vehicle on a level surface and engage the parking brake. It is recommended to keep the engine running to provide stable power to the inflator.
- Connect to Power: Insert the inflator's 12V power plug firmly into your vehicle's cigarette lighter socket.
- Access Tire Valve: Remove the valve cap from the tire you wish to inflate.
- Attach Air Hose: Screw the air hose nozzle onto the tire valve stem until it is securely fastened and no air is leaking.
Operating Instructions
- Check Current Pressure: Once connected to the tire valve, the digital display will show the current tire pressure.
- Set Desired Pressure: Use the '+' and '-' buttons on the digital display to set your desired tire pressure (in PSI). Refer to your vehicle's owner's manual or door jamb sticker for recommended pressure.
- Start Inflation: Press the power switch to turn on the inflator. The device will begin inflating the tire.
- Auto Cut-Off: The inflator will automatically shut off once the preset pressure is reached.
- Disconnect: Turn off the inflator (if it hasn't auto-shut off), unscrew the air hose nozzle from the tire valve, and replace the valve cap. Disconnect the 12V power plug from your vehicle.
- Use LED Light: If operating in low light, press the dedicated LED light button to illuminate your work area.
Maintenance
- Cleaning: Wipe the inflator with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the device is unplugged before cleaning.
- Storage: Store the inflator in its provided storage bag in a cool, dry place, away from direct sunlight and extreme temperatures.
- Fuse Replacement: If the inflator stops working, check the fuse located in the 12V power plug. Unscrew the tip of the plug to access and replace the fuse with the provided spare fuse (or a compatible one).
- Hose Inspection: Periodically inspect the air hose for any signs of wear, cracks, or damage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Inflator does not turn on. | 1. Loose power connection. 2. Blown fuse in the 12V plug. 3. Vehicle's 12V socket is not working. | 1. Ensure the 12V plug is fully inserted. 2. Replace the fuse in the 12V plug (refer to Maintenance). 3. Test the 12V socket with another device or check vehicle's fuse box. |
| Slow inflation or low pressure. | 1. Air leak from hose connection. 2. Insufficient power from vehicle. 3. Inflator motor issue. | 1. Ensure the hose is tightly screwed onto the tire valve. 2. Ensure vehicle engine is running. 3. Contact customer support if problem persists. |
| Inflator gets very hot. | Continuous operation beyond recommended time. | Allow the inflator to cool down for at least 2 minutes after 10 minutes of continuous use. |
| Digital display not working. | Power issue or internal fault. | Check power connection and fuse. If problem persists, contact customer support. |
Specifications
- Model: BCT-150D
- Brand: Bergmann
- Material: Metal
- Power Source: Corded Electric (12V DC)
- Wattage: 150 Watts
- Air Flow Capacity: 35 Liters Per Minute
- Maximum Pressure: 150 PSI
- Operation Mode: Automatic (with Auto Cut-Off)
- Item Weight: 0.8 Kilograms
- Product Dimensions (L x W x H): 18 x 8 x 12 Centimeters
- Hose Length: 3 Metres
- Country of Origin: China
Warranty and Support
Your Bergmann Typhoon Digital Tyre Inflator comes with a 1-Year Comprehensive Warranty from the date of purchase.
For warranty claims, technical assistance, or any product-related queries, please contact Bergmann Customer Service:
- Customer Service Number: 70454-10001 (Available 11 AM to 5 PM IST)
- Email: admin@matrixone.co.in
- Manufacturer/Importer: MatrixOne Brands Pvt. Ltd., Malad West, Mumbai - 400064
Please retain your purchase receipt for warranty validation.