BRIO 34593 Builder Light Set Instruction Manual

Introduction

This manual provides instructions for the assembly, operation, and maintenance of your BRIO 34593 Builder Light Set. This 120-piece construction toy encourages creative building with a variety of wooden and plastic components, including four battery-powered light elements to enhance your creations. Please read all instructions carefully before use.

Safety Information

WARNING: CHOKING HAZARD -- Small parts. Not for children under 3 years.

Always supervise young children during play. Ensure all components are securely fastened to prevent detachment of small parts. Keep batteries out of reach of small children.

What's in the Box

The BRIO 34593 Builder Light Set includes 120 pieces, comprising:

• 4x Light Components
• A selection of easy-to-use tools
• Various wooden and plastic construction pieces (e.g., blocks, wheels, connectors, fasteners)

Image: The complete BRIO 34593 Builder Light Set, showing the product box and all included construction pieces, tools, and light components.

Image: A close-up view of various wooden and plastic components, including wheels, connectors, and fasteners, from the BRIO Builder Light Set.

Setup and Assembly

1. Unpack Components: Carefully remove all pieces from the packaging. Verify that all 120 pieces, including the 4 light components and tools, are present.
2. Battery Installation (Light Components): Each light component requires 2 LR44 batteries (8 LR44 batteries are included in total).
   • Locate the battery compartment on the light component.
   • Using a small screwdriver (not included, but often required for battery compartments), open the compartment.
   • Insert the LR44 batteries, ensuring correct polarity (+/-).
   • Securely close the battery compartment.
   

   Image: A single BRIO light component, illustrating its design and where batteries are typically inserted.
3. Creative Construction: Use the provided tools and various pieces to build your desired structures. The set is designed for open-ended play, allowing for a wide range of creations such as vehicles, robots, and more.

Operating Instructions

1. Activating Light Components: Each light component has a button to turn the light on and off. Press the button once to activate the light. Press again to turn it off.
2. Integrating Lights into Creations: The light components can be attached to various parts of your constructions. Experiment with different placements to illuminate your designs. Some light components may have interchangeable colored caps.

Image: An example of a constructed wooden car featuring two green light components integrated into its design, illuminating the wheels.

Image: An example of a constructed robot figure with multiple light components serving as eyes and other features, displaying various colors.

Maintenance

• Cleaning: Wipe all wooden and plastic components with a slightly damp cloth. Do not immerse any parts, especially light components, in water. Avoid using harsh cleaning agents.
• Storage: Store the set in a dry place, away from direct sunlight and extreme temperatures, to preserve the quality of the materials.
• Battery Replacement: When the light components dim or stop working, replace the LR44 batteries as described in the "Setup and Assembly" section. Always dispose of used batteries responsibly.

Troubleshooting

• Lights Not Working:
  • Check if the batteries are correctly installed with the proper polarity.
  • Replace old batteries with new LR44 batteries.
  • Ensure the light component button is fully pressed.
• Pieces Not Connecting Securely:
  • Ensure you are using the correct fasteners and tools for the specific connection points.
  • Verify that no foreign objects are obstructing the connection holes.

Specifications

Warranty and Support

For warranty information or product support, please refer to the official BRIO website or contact their customer service directly. Keep your purchase receipt as proof of purchase.

Official BRIO Website: www.brio.net