1. Introduction
This manual provides detailed instructions for the proper operation and maintenance of your WOUXUN KG-UV2D Dual Band Two-Way Radio. Please read this manual thoroughly before using the radio to ensure safe and efficient operation. Keep this manual for future reference.
2. Safety Information
To prevent personal injury or property damage, observe the following safety precautions:
- Do not operate the radio in explosive atmospheres (e.g., flammable gases, dust particles, metallic powders).
- Do not transmit without an antenna attached.
- Use only WOUXUN approved batteries and chargers. Improper use may cause fire, explosion, or injury.
- Do not expose the radio to direct sunlight for extended periods or place it near heating appliances.
- Keep the radio away from medical devices to avoid interference.
- Do not disassemble or modify the radio. Repairs should only be performed by qualified technicians.
3. Package Contents
Verify that all items are present in your package:
- WOUXUN KG-UV2D Transceiver
- 7.4V 1700mAh Lithium-ion Battery
- Antenna
- Smart Desktop Charger (220 VAC)
- Quick Charge Clip
- Microphone/Headset
- English User Manual (Printed)
4. Product Overview
The WOUXUN KG-UV2D is a robust dual-band two-way radio designed for reliable communication. It features a durable construction and an advanced menu system for various functions. Key features include:
- Dual Band Operation: Supports both VHF (136-174 MHz) and UHF (400-480 MHz) frequencies.
- Extended Receive Band: Capable of receiving 88-108 MHz (FM radio), 136-174 MHz, and 400-480 MHz.
- Dual Watch Function: Allows simultaneous monitoring of two frequencies (VV, VU, UU) with on-screen indication.
- DTMF Encoder: For advanced signaling and control.
- CTCSS/DCS Tones: Programmable sub-audio and digital codes for selective calling.
- Emergency Alarm: Dedicated button activates a loud alarm and flashing LEDs, transmitting a digital identification signal.
- VOX Function: Voice-activated transmission with adjustable sensitivity.
- Backlit LCD Display: Clear display with blue illumination during transmission.
- PC Programmable: Customize settings and channels via optional PC software and cable.
- Customizable Welcome Message: Personalize the radio's power-on display.
Image 1: The WOUXUN KG-UV2D Dual Band Two-Way Radio. This image shows the front of the radio, including the antenna, control knobs, speaker grille, LCD display, and keypad. The display shows frequency information, and the keypad includes numeric buttons and function keys.
5. Setup
5.1 Battery Installation
- Align the battery pack with the grooves on the back of the radio.
- Slide the battery pack upwards until it clicks into place.
- To remove, press the battery release latch (if present) and slide the battery downwards.
5.2 Antenna Attachment
- Screw the antenna clockwise into the connector on the top of the radio until it is firmly seated.
- Do not overtighten.
5.3 Initial Charging
Before first use, fully charge the battery.
- Place the radio with the battery installed into the smart desktop charger.
- Ensure the charging indicator light on the charger illuminates (typically red).
- Charge for approximately 4-5 hours, or until the indicator light turns green, indicating a full charge.
6. Basic Operation
6.1 Power On/Off
Rotate the Power/Volume knob (top-left knob) clockwise to turn the radio on. Continue rotating to adjust the volume. Rotate counter-clockwise until a click is heard to turn the radio off.
6.2 Frequency/Channel Selection
- VFO Mode (Frequency Mode): Directly enter frequencies using the numeric keypad. Use the Up/Down arrow keys to fine-tune the frequency.
- Channel Mode: Use the Up/Down arrow keys to scroll through programmed memory channels.
- Press the VFO/MR button (often labeled A/B or similar) to switch between VFO and Channel modes.
6.3 Transmitting (PTT)
To transmit, press and hold the PTT (Push-To-Talk) button on the side of the radio. Speak clearly into the microphone. Release the PTT button to stop transmitting and return to receive mode.
6.4 Receiving
When the radio is on and tuned to an active frequency or channel, you will hear incoming transmissions through the speaker. Adjust the Power/Volume knob for desired audio level.
7. Advanced Features
7.1 Dual Watch (TDR)
The Dual Watch function allows the radio to monitor two different frequencies or channels simultaneously. If a signal is detected on either frequency, the radio will switch to that frequency. To activate/deactivate, press the TDR button (often green, located near the display).
7.2 CTCSS/DCS Tones
CTCSS (Continuous Tone-Coded Squelch System) and DCS (Digital Coded Squelch) tones are used to filter out unwanted signals and allow for private group communication. These can be programmed via the radio's menu or PC software. Refer to the detailed menu section in the printed manual for specific programming steps.
7.3 VOX Function
VOX (Voice Operated Transmit) enables hands-free operation. When VOX is active, the radio will automatically transmit when it detects your voice. The sensitivity of the VOX function can be adjusted through the radio's menu.
7.4 Emergency Alarm
Pressing the dedicated Emergency button (often red, labeled 'MENU' or 'EMG') will activate a loud audible alarm and cause the radio's LEDs to flash. It will also transmit a digital identification signal. Press the button again to deactivate the alarm.
7.5 PC Programming
The WOUXUN KG-UV2D can be programmed using a computer and optional programming software/cable. This allows for easier management of memory channels, CTCSS/DCS settings, and other advanced parameters. Software is typically available for download from the manufacturer's website.
8. Maintenance
8.1 Cleaning
Wipe the radio's surface with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the radio is dry before use.
8.2 Battery Care
- Always use the specified charger.
- Do not short-circuit the battery terminals.
- If the radio will not be used for an extended period, remove the battery and store it in a cool, dry place.
- Avoid fully discharging the battery frequently to prolong its lifespan.
9. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Radio does not power on | Battery is low or not installed correctly. | Charge the battery. Reinstall the battery securely. |
| Cannot transmit | Incorrect frequency/channel. PTT button not pressed. Transmit power too low. | Verify frequency/channel. Press PTT firmly. Check transmit power settings. |
| Poor reception or no audio | Volume too low. Squelch level too high. Antenna not connected. Incorrect CTCSS/DCS. | Increase volume. Adjust squelch level. Ensure antenna is attached. Verify CTCSS/DCS settings. |
| Keypad is unresponsive | Keypad lock is active. | Deactivate keypad lock (refer to the printed manual for specific key combination). |
10. Specifications
| Feature | Specification |
|---|---|
| Brand | WOUXUN |
| Model Number | KG-UV2D |
| Color | Black |
| Frequency Range | VHF: 136-174 MHz; UHF: 400-480 MHz |
| Number of Channels | 32 |
| Voltage | 7.4 Volts |
| Battery Capacity | 1700 mAh Lithium-ion |
| Impedance | 50 ohms |
| Water Resistance Level | Not waterproof |
| Compatible Devices | Microphone, Headset |
| Special Features | Dual band, DTMF encoder, Tone scan, Dual watch, CTCSS/DCS tones, Sub-audio tones, Emergency alarm with flashing LEDs, VOX |
11. Warranty and Support
Information regarding specific warranty terms for the WOUXUN KG-UV2D is not available in the provided product details. For warranty claims, technical support, or service inquiries, please contact your authorized WOUXUN dealer or the manufacturer directly. Keep your purchase receipt as proof of purchase.
