EPOMAKER SKYLOONG SK64 Mechanical Keyboard User Manual

Introduction

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your EPOMAKER SKYLOONG SK64 mechanical keyboard. Please read this guide thoroughly to ensure proper use and to maximize your keyboard's functionality.

Image: The EPOMAKER SKYLOONG SK64 mechanical keyboard showcasing its RGB backlighting.

What's in the Box

Upon unboxing your EPOMAKER SKYLOONG SK64 keyboard, verify that all the following items are included:

• EPOMAKER SKYLOONG SK64 Mechanical Keyboard
• Mac Keycaps (for macOS compatibility)
• Keycap Puller
• Switch Puller
• USB-C Cable

Image: All components included in the EPOMAKER SKYLOONG SK64 package, including the keyboard, cables, and tools.

Setup

Connecting the Keyboard

1. Locate the USB-C port on the back or side of the SK64 keyboard.
2. Connect one end of the provided USB-C cable to the keyboard.
3. Connect the other end of the USB-C cable to an available USB port on your computer.
4. The keyboard will automatically be recognized by your operating system. No additional drivers are typically required for basic functionality.

Note: This keyboard connects via USB-C and does not support Bluetooth connectivity. Ensure a stable wired connection for optimal performance.

Image: The EPOMAKER SKYLOONG SK64 keyboard, explicitly indicating no Bluetooth functionality.

Operating Instructions

Key Layout and Functionality

The SK64 features a 60% layout with 64 keys, including dedicated arrow keys for enhanced usability in a compact form factor. The keyboard supports N-Key Rollover and anti-ghosting, ensuring all key presses are registered accurately, which is crucial for gaming and fast typing.

Image: A diagram illustrating the keycap layout and sizes for the SK64 keyboard.

Windows and Mac Layout Switching

The keyboard supports switching between Windows and Mac layouts. Refer to the included quick start guide or the manufacturer's software for specific key combinations to toggle between these modes. This allows for seamless integration with both operating systems.

RGB Backlighting Control

The SK64 features 16 million color RGB backlighting. You can customize lighting effects and colors using the dedicated software provided by EPOMAKER. The software also allows for setting up musical rhythm modes where the lighting responds to audio, or creating custom lighting schemes.

Image: The EPOMAKER SKYLOONG SK64 keyboard illuminated with its customizable RGB backlighting.

Function Key Combinations (FN Layer)

Due to its compact 60% layout, many functions, including F-keys (F1-F12), are accessed via combinations with the Fn key. Consult the keyboard's physical layout or the included manual for specific Fn key combinations to access multimedia controls, F-keys, and other secondary functions.

Example: To use F1, you typically press Fn + 1. The exact mapping may vary, so refer to the provided documentation or the manufacturer's website for a complete list.

Maintenance

Cleaning the Keyboard

The SK64 features PBT thermal sublimation keycaps, known for their high abrasive resistance and oil-proof properties, ensuring durability and preventing legends from fading. The mainboard is designed with IP6X dustproof protection.

• Keycaps: Use a soft, damp cloth with mild soap and water to clean the keycaps. For deeper cleaning, keycaps can be removed using the provided keycap puller.
• Keyboard Body: Wipe the keyboard body with a dry or slightly damp cloth. Avoid excessive moisture.
• Dust Removal: Use compressed air to remove dust and debris from between the keycaps and switches.

Keycap and Switch Replacement

The SK64 is a hot-swappable keyboard, allowing you to replace Gateron Optical switches without soldering. This feature enables customization and easy maintenance.

1. Removing Keycaps: Use the provided keycap puller to gently lift keycaps off the switches.
2. Removing Switches: Use the provided switch puller to carefully grip and pull the optical switch straight up from the PCB.
3. Installing Switches: Align the pins of the new optical switch with the holes on the PCB and press down gently until it clicks into place. Ensure the switch is seated correctly to avoid bent pins.
4. Installing Keycaps: Press the desired keycap onto the switch stem until it is firmly seated.

Caution: Only use compatible Gateron Optical switches for replacement. Using incompatible switches may damage the keyboard.

Troubleshooting

Keyboard Not Responding

• Ensure the USB-C cable is securely connected to both the keyboard and the computer.
• Try connecting the keyboard to a different USB port on your computer.
• Test the keyboard on another computer to rule out system-specific issues.
• If using a USB hub, try connecting directly to the computer.

F-Keys (F1-F12) Not Working

• Remember that F-keys are typically accessed via the Fn key combination on 60% keyboards. For example, press Fn + 1 for F1.
• Refer to the keyboard's specific key mapping or the manufacturer's software for the correct Fn key combinations.

RGB Backlight Issues

• Ensure the keyboard is properly connected and receiving power.
• Use the EPOMAKER software to adjust brightness and lighting effects.
• If keycap legends are difficult to see in low light, consider using the software to increase brightness or selecting a lighter keycap set if customization is desired.

Software Not Recognizing Keyboard

• Ensure you have the latest version of the EPOMAKER software installed.
• Try disconnecting and reconnecting the keyboard, then restart the software.
• Restart your computer and try again.
• Temporarily disable any antivirus or firewall software that might be interfering.

Specifications

Support and Warranty

For further assistance, technical support, or warranty information, please refer to the official EPOMAKER website or contact their customer service directly. Details can typically be found on the product packaging or the manufacturer's online resources.