1. Product Overview
The Bolton Technical Bolton600 Ultra Low-Loss Coaxial Cable is engineered for efficient and reliable signal transfer in 50 Ohm RF systems. This cable is designed to minimize signal strength loss, making it suitable for a wide range of applications including cellular signal boosters, WiFi repeaters, and other radio frequency installations. Its robust construction ensures durability and consistent performance.
Image 1.1: Bolton Technical Bolton600 Ultra Low-Loss Coaxial Cable with N-Male connectors.
Key Features:
- 50 Ohm System Compatibility: Designed for use with any 50 Ohm RF system, ensuring broad compatibility with various devices.
- LMR600 Equivalent: Offers performance comparable to LMR600 specifications, providing ultra-low signal loss.
- Pro-Grade Construction: Features a durable, fire-retardant PE jacket suitable for both indoor and outdoor commercial applications.
- Wide Device Support: Compatible with cellular signal boosters, WiFi devices, antennas, repeaters, and more, across all North American carriers.
Image 1.2: Close-up of Bolton600 N-Male connector, highlighting its role in maximizing RF signal integrity.
2. Installation Guide
Proper installation of the Bolton600 coaxial cable is crucial for optimal performance. This cable is equipped with N-Male connectors on both ends, designed for secure and efficient connections to compatible 50 Ohm RF equipment.
Connecting the Cable:
- Identify Connectors: Ensure that the devices you are connecting have compatible N-Female ports.
- Align Connectors: Carefully align the N-Male connector on the cable with the N-Female port on your device. Avoid forcing the connection.
- Hand-Tighten: Gently screw the connector clockwise until it is hand-tight.
- Secure Connection: Use a wrench to tighten the connection an additional quarter turn. Do not overtighten, as this can damage the connectors.
- Route Cable: Route the cable along its intended path, ensuring it is not sharply bent or kinked. Maintain a minimum bend radius to prevent damage and signal degradation.
Image 2.1: The Bolton600 cable is compatible with various 50 Ohm RF systems, including cellular signal boosters, televisions, cable boxes, Ham radios, antennas, repeaters, cellular WiFi devices, and satellite systems.
Indoor and Outdoor Use:
The Bolton600 cable features a robust LLDPE or fire-retardant PE jacket, making it suitable for both indoor and outdoor installations. Its weather-resistant properties ensure reliable performance in various environmental conditions.
Image 2.2: The Bolton600 cable is designed for safe and reliable use in both indoor and outdoor environments.
3. Operation
Once properly installed, the Bolton600 Ultra Low-Loss Coaxial Cable operates passively, facilitating the transfer of RF signals between connected devices. No user intervention is required for its operation. Ensure all connections remain secure and free from physical stress to maintain optimal signal integrity.
4. Care and Maintenance
To ensure the longevity and continued performance of your Bolton600 coaxial cable, follow these care and maintenance guidelines:
- Regular Inspection: Periodically inspect the cable and its connectors for any signs of wear, damage, or corrosion.
- Cleaning: If necessary, gently clean the cable jacket with a soft, damp cloth. Ensure connectors are dry before re-connecting.
- Avoid Sharp Bends: While flexible, avoid bending the cable sharply, especially near the connectors, to prevent internal damage and signal loss.
- Secure Connections: Ensure all N-Male connections remain tight to prevent signal degradation due to loose contacts.
- Environmental Protection: Although designed for outdoor use, protect the cable from extreme physical stress or prolonged exposure to harsh chemicals.
Image 4.1: The Bolton600 cable features triple shielding and a CL3 rating, contributing to signal quality, fire resistance, flexible installation, and protection from electrical shock.
5. Troubleshooting
If you experience issues with your signal, consider the following troubleshooting steps:
- No Signal or Weak Signal:
- Check all cable connections to ensure they are secure and properly tightened.
- Inspect the cable for any visible damage, kinks, or sharp bends.
- Verify that all connected devices are powered on and functioning correctly.
- Intermittent Signal:
- Ensure connectors are not loose. Hand-tighten and then use a wrench for a quarter turn if necessary.
- Check for any external interference sources near the cable run.
- Connector Issues:
- If a connector appears damaged, it may need replacement. Contact support for assistance.
For persistent issues, refer to the Warranty and Support section for contact information.
6. Technical Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 5 x 5 x 5 inches; 1.75 Pounds |
| Item Model Number | a0f80ef1-5641-45ca-9aca-a18393c7ea20 |
| Manufacturer | Bolton Technical |
| Connector Type | N-Male (Coaxial) |
| Cable Type | Coaxial |
| Compatible Devices | Smartphone, Tablet, Signal Boosters, WiFi Repeaters, Antennas |
LMR600 Equivalent Specification:
- Flexible ultra low loss cable
- 0.59 inch jacket made of fire retardant PE
- Maximum frequency: 2.5 GHz
- Return loss: >=20
- RoHS directive 2011/65/EU compliant
Attenuation Chart:
Image 6.1: Attenuation values for the Bolton600 Coaxial Cable at various frequencies.
| Frequencies (MHz) | dB/100ft | dB/100m |
|---|---|---|
| 30 MHz | 0.40 | 1.40 |
| 50 MHz | 0.50 | 1.80 |
| 150 MHz | 1.00 | 3.20 |
| 220 MHz | 1.20 | 3.90 |
| 450 MHz | 1.70 | 5.60 |
| 900 MHz | 2.50 | 8.20 |
| 1500 MHz | 3.30 | 10.90 |
| 1800 MHz | 3.70 | 12.10 |
| 2000 MHz | 3.90 | 12.80 |
| 2500 MHz | 4.40 | 14.50 |
| 5800 MHz | 7.30 | 23.80 |
7. Warranty and Support
Bolton Technical is committed to providing high-quality products and excellent customer service. Your Bolton600 Ultra Low-Loss Coaxial Cable comes with the following:
- Lifetime Technical Support: Access to expert assistance for any technical questions or issues you may encounter.
- 30-Day Money-Back Guarantee: If you are not satisfied with your purchase, you may return it within 30 days for a full refund.
- Full Year Warranty: Your product is covered by a one-year warranty against manufacturing defects.
For support, please visit the Bolton Technical website or contact their customer service team directly.
