Introduction
Thank you for choosing Ustellar 80W LED Flood Lights. This manual provides essential information for the safe installation, operation, and maintenance of your new floodlights. Please read it thoroughly before installation and retain it for future reference.
Image: Three Ustellar 80W LED Flood Lights, showcasing their compact design and bright LED array.
Safety Information
WARNING: To reduce the risk of fire, electric shock, or injury to persons, please observe the following:
- Installation must be performed by a qualified electrician in accordance with all local and national electrical codes.
- Disconnect power at the fuse or circuit breaker before installing or servicing.
- Ensure the supply voltage is 120 Volts AC.
- Do not modify the fixture or wiring.
- Do not look directly into the LED light source when illuminated.
- This product is designed for outdoor use and has an IP66 waterproof rating. However, ensure all connections are properly sealed to maintain water resistance.
- Keep flammable materials away from the light fixture.
Package Contents
Verify that all components are present and undamaged:
- Ustellar 80W LED Flood Lights (3 units)
- Mounting Hardware
- Wiring Components
Specifications
| Feature | Specification |
|---|---|
| Brand | USTELLAR |
| Model Number | UT88861 |
| Wattage | 80 Watts (per light) |
| Brightness | 8000 Lumens (per light), 24000 Lumens (total for 3-pack) |
| Color Temperature | 5000 Kelvin (Daylight White) |
| Voltage | 120 Volts |
| Water Resistance Level | IP66 Waterproof |
| Lifespan | 50,000 Hours |
| Material | Aluminum, Tempered Glass |
| Dimensions (L x W x H) | 9.8" x 1.57" x 6.6" |
| Weight | Approx. 8.04 lbs (for 3-pack) |
| Installation Type | Wall Mount (Hard-wired, No Plug) |
Setup and Installation
These floodlights are designed for hard-wired installation. Professional installation is recommended.
- Preparation: Turn off power at the circuit breaker before beginning installation. Ensure the mounting surface is sturdy enough to support the fixture's weight.
- Mounting: Use the provided mounting hardware to securely attach the floodlight bracket to the desired surface. The bracket allows for adjustable angle positioning.
- Wiring: The floodlight comes with a UL Listed cord for hardwiring. Connect the floodlight's wires to your electrical system's corresponding wires (Live, Neutral, Ground) using appropriate wire connectors. Ensure all connections are tight and insulated.
- Sealing: For outdoor installations, ensure all wiring connections are properly sealed and protected from moisture to maintain the IP66 rating.
- Power On: Once installation is complete and all connections are secure, restore power at the circuit breaker.
Image: This diagram illustrates the physical dimensions of the floodlight and its adjustable mounting bracket, allowing for precise light direction.
Image: The rear view of the floodlight highlights its advanced fin-type heatsink for efficient cooling and the UL Listed electrical cord for secure hardwiring.
Image: A Ustellar floodlight is shown under simulated rain, emphasizing its IP66 waterproof capability, ensuring durability in various weather conditions.
Operating Instructions
The Ustellar 80W LED Flood Light operates by being connected to a standard 120V AC power source. Once installed and wired correctly, the light will illuminate when power is supplied to its circuit.
- Turning On/Off: Control the floodlight using the external wall switch or circuit breaker to which it is connected.
- Adjusting Angle: The integrated mounting bracket allows for a 150-degree adjustable angle. Loosen the screws on the side of the bracket, adjust the light to the desired angle, and then tighten the screws to secure it.
Image: This composite image displays various practical applications for the Ustellar floodlight, including illuminating swimming pools, backyards, basketball courts, and garages.
Maintenance
Regular maintenance ensures optimal performance and longevity of your floodlights.
- Cleaning: Periodically clean the surface of the light fixture with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure the light is off and cool before cleaning.
- Inspection: Annually inspect the wiring and mounting for any signs of wear, damage, or loose connections. Address any issues promptly.
- Breather Valve: The floodlight features a unique breather valve designed to prevent moisture ingress and regulate internal pressure, contributing to its long lifespan. No specific maintenance is required for this valve.
Image: This diagram illustrates the internal mechanism of the unique breather valve, which prevents moisture and dust from entering while regulating internal air pressure to prolong the light's lifespan.
Troubleshooting
If you encounter issues with your Ustellar LED Flood Light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power supply Loose wiring connection Faulty light fixture | Check circuit breaker and wall switch. Verify all wiring connections are secure (ensure power is off first). If other solutions fail, contact customer support. |
| Light flickers | Unstable power supply Loose wiring connection | Ensure stable power source. Check and secure all wiring connections. |
| Reduced brightness | Dirt or debris on lens Aging LEDs | Clean the lens with a soft, damp cloth. LEDs have a long lifespan, but gradual degradation can occur over many years. |
If the problem persists after attempting these solutions, please contact Ustellar customer support.
Warranty and Support
Ustellar provides a limited warranty for this product. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Ustellar website.
For technical support, warranty claims, or any other inquiries, please contact Ustellar customer service through their official channels. When contacting support, please have your model number (UT88861) and purchase information ready.
Ustellar Store Link: Visit the Ustellar Store on Amazon
