Lepro PR410084-RGB-JP-F

Lepro LED Tape Light SMD 5050 User Manual

Model: PR410084-RGB-JP-F

Introduction

Thank you for choosing the Lepro LED Tape Light SMD 5050. This product is designed to provide versatile and vibrant lighting for various indoor and outdoor applications. This manual contains important information regarding the safe installation, operation, and maintenance of your LED tape light. Please read it thoroughly before use and retain it for future reference.

Lepro LED Tape Light product image showing the LED strip, remote, and power adapter.

Image: Overview of the Lepro LED Tape Light kit, including the LED strip, remote control, and power adapter.

Product Features

  • Adjustable Brightness & Color DIY: The RGB LED tape light offers 20 preset colors, including red, green, blue, and white, along with 6 DIY color modes for customized lighting. Brightness can be adjusted for each color using the 44-key remote controller.
  • Memory Function: The LED tape light retains the last selected lighting mode and brightness setting even after the power is turned off. It will resume the previous setting upon power restoration.
  • Life Waterproof Specification: The LED tape light features a gel potting protection, making it resistant to splashes. It is not designed for underwater use. Please note that the power adapter is not waterproof and should be protected from moisture.
  • Easy Setup & Cuttable: Equipped with strong 3M double-sided adhesive tape for simple installation. The tape light can be cut at designated marks to achieve the desired length. (Caution: Cut sections cannot be reused.)
  • Versatile Applications: Suitable for various environments such as bedrooms, hallways, walls, ceilings, stairs, entrances, under shelves, kitchens, shops, sign lighting, restaurants, hotels, entertainment venues, buildings, and for decorative illumination during Christmas or parties.
Image showing waterproof rating, 20 color options, brightness adjustment, cuttable feature, memory function, and no tools required for installation.

Image: Key features of the LED tape light, including its waterproof rating (IP65), color options, and ease of use.

Package Contents

Please check the package to ensure all items are present:

  • 1 x 10m LED Tape Light (consisting of 2 x 5m reels)
  • 1 x 44-Key Remote Controller
  • 1 x DC12V Power Adapter
  • 1 x Controller Box
  • 1 x User Manual
Image showing the components of the LED tape light kit, including the LED strip, remote, power adapter, and controller.

Image: Contents of the product package, highlighting the LED strip, remote, and power supply.

Safety Information

  • Power Overload: Do not connect this LED tape light with other tape lights. Connecting multiple strips may lead to power overload and potential malfunction.
  • Heat Buildup: Before connecting to power, ensure the entire tape light is unrolled and laid out. Connecting the power while the tape is still rolled on the reel can cause excessive heat buildup and lead to damage or fire.
  • Water Protection: The LED tape light itself has a life waterproof rating (IP65) due to gel potting, but it is not suitable for immersion in water. The power adapter is NOT waterproof and must be kept in a dry environment.
  • Cutting: Only cut the tape light at the designated cut marks. Cutting at other points will damage the circuit and prevent the cut section from working. Cut sections cannot be reconnected or reused.
  • Voltage: Use only with the provided DC12V power adapter. Do not connect to higher voltage power sources.

Setup & Installation

  1. Prepare the Surface: Ensure the installation surface is clean, dry, and smooth. Dust, oil, or moisture can reduce the adhesive's effectiveness.
  2. Unroll the Tape Light: Fully unroll both 5-meter reels of the LED tape light before connecting any power.
  3. Connect the Strips: Connect the two 5-meter LED tape light reels to the Y-splitter cable from the controller box. Ensure the 4-pin connectors are aligned correctly, matching the arrow on the connector to the '+' pole on the LED tape.
  4. Attach the Tape Light: Peel off the protective backing from the 3M adhesive tape on the back of the LED strip. Carefully press the tape light onto the desired surface.
  5. Connect the Controller and Power Adapter: Connect the controller box to the DC12V power adapter. Then, plug the power adapter into a standard 100V AC outlet.
  6. Remote Preparation: Before first use, remove the transparent insulation sheet from the battery compartment of the 44-key remote control.
Diagram showing how to connect the LED strips to the controller and power adapter, and where to cut the strip.

Image: Detailed connection diagram for the LED tape light, illustrating the 4-pin connector alignment and designated cutting points.

Image showing how to remove the insulation sheet from the remote control.

Image: Instructions for preparing the remote control by removing the insulation sheet.

Operating Instructions

The LED tape light is controlled using the included 44-key infrared remote control. Point the remote directly at the receiver on the controller box for optimal response.

Layout of the 44-key remote control with buttons for power, brightness, 20 colors, DIY modes, and dynamic effects.

Image: Diagram of the 44-key remote control, detailing the function of each button.

Remote Control Functions:

  • Power Button (Red): Turns the LED tape light ON or OFF.
  • Brightness Adjustment (Sun Up/Down): Increases or decreases the brightness of the selected color or mode.
  • Color Selection (20 Buttons): Directly select from 20 preset static colors.
  • RGB Intensity Adjustment (R/G/B Up/Down): Adjust the intensity of Red, Green, or Blue components to create custom colors.
  • DIY Modes (DIY1-DIY6): After adjusting RGB intensity to create a custom color, press one of the DIY buttons to save it. Pressing the same DIY button again will recall the saved color.
  • Dynamic Modes:
    • JUMP3/JUMP7: Cycles through 3 or 7 colors with a sudden transition.
    • FADE3/FADE7: Fades smoothly through 3 or 7 colors.
    • QUICK/SLOW: Adjusts the speed of dynamic modes.
    • AUTO: Cycles through all dynamic modes.
    • FLASH: Flashes white light.

Video: Demonstration of the Lepro LED Tape Light's remote control functions, showing color changes and dynamic lighting modes.

Maintenance

  • Cleaning: To clean the LED tape light, gently wipe it with a soft, dry cloth. Do not use abrasive cleaners or harsh chemicals, as these may damage the strip or its waterproof coating.
  • Storage: If storing the tape light for an extended period, ensure it is clean and dry. Store it in a cool, dry place away from direct sunlight.
  • Adhesive: The 3M adhesive is strong but may lose effectiveness if repositioned multiple times. Ensure the initial placement is correct.

Troubleshooting

ProblemPossible CauseSolution
LED tape light does not turn on.1. Power adapter not connected or faulty.
2. Remote control battery dead or insulation sheet not removed.
3. Connections between components are loose or incorrect.
4. Tape light cut incorrectly.		1. Check power connections. Ensure adapter is plugged in and functional.
2. Remove insulation sheet from remote. Replace battery if necessary.
3. Verify all 4-pin connectors are securely attached and aligned correctly (arrow to '+').
4. Ensure cuts were made only at designated marks.
Remote control is not responding.1. Remote not pointed at receiver.
2. Obstruction between remote and receiver.
3. Remote battery low or dead.		1. Point the remote directly at the white receiver box.
2. Remove any objects blocking the line of sight.
3. Replace the remote control battery.
Colors are incorrect or inconsistent.1. RGB connection pins are not aligned correctly.
2. Faulty LED segment.		1. Disconnect and reconnect the 4-pin connectors, ensuring the arrow aligns with the '+' symbol.
2. If a segment is faulty, it may be due to an incorrect cut or manufacturing defect. Contact customer support.

Specifications

  • Model Number: PR410084-RGB-JP-F
  • Brand: Lepro
  • Color: RGB
  • Light Source Type: LED
  • Length: 10 meters (2 x 5m reels)
  • LEDs per Meter: 30 LEDs/m (Total 300 LEDs)
  • Features: Dimmable, Color Changing
  • Light Colors: Red, Green, Blue, White, and 20 other types
  • Controller Type: 44-Key Infrared Remote Control
  • Connectivity: Infrared
  • Voltage: 100 Volts (Input to adapter), 12V DC (Output to strip)
  • Wattage: 36 W
  • Material: Synthetic Resin, Copper Wire
  • Product Weight: 550 grams
  • Product Dimensions: 10m (Length) x 0.08m (Width) x 0.08m (Height)
  • Indoor/Outdoor Use: Designed for both indoor and outdoor decorative lighting (Note: Power adapter is for indoor use only).

Warranty & Support

This Lepro LED Tape Light comes with a 2-year manufacturer's warranty. We strive for the highest product quality, but if you encounter any issues or have questions during use, please do not hesitate to contact us. You can reach our customer support by navigating to the 'Lepro JP' store page and clicking 'Ask a Question'.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.