Introduction
Thank you for choosing the Intex 2 in 1 Inflatable Pull Out Sofa and Queen Size Air Bed Mattress. This versatile product is designed to provide comfortable seating and sleeping solutions for indoor and outdoor use. Please read this manual carefully before setup and operation to ensure proper use and longevity of your product.
Image: The Intex 2 in 1 Inflatable Pull Out Sofa shown as a sofa and extended into a queen-size air bed.
Safety Information
- Adult Supervision: Always supervise children around inflatable products.
- Avoid Sharp Objects: Keep the product away from sharp objects, heat sources, and open flames.
- Weight Capacity: Do not exceed the maximum weight capacity of 440 pounds (200 kg).
- Inflation: Do not over-inflate. Over-inflation can cause damage to the product.
- Placement: Ensure the product is placed on a flat, smooth surface free of debris.
- Pump Not Included: This product does not include an air pump. A suitable air pump (electric or manual) is required for inflation.
Setup
1. Unpacking and Preparation
- Carefully remove the inflatable sofa from its packaging.
- Unfold the sofa completely and lay it flat on a clean, level surface. Ensure there are no sharp objects underneath that could puncture the material.
2. Inflation
- Locate the air valves on the product. The Intex Pull-Out Sofa features extra-wide air-valve openings for fast inflation and deflation.
- Using an appropriate air pump (not included), begin inflating the sofa. Inflate the main body first, then the armrests and backrest sections.
- Inflate until the sofa is firm to the touch but not rigid. Avoid over-inflation.
- Close all air valves securely after inflation.
Image: A person inflating an air mattress with a pump. This illustrates the general process for inflating the sofa.
Operating Instructions
Using as a Sofa
Once inflated, the product functions as a comfortable two-seater sofa. The charcoal gray velvety surface provides a soft seating area. Built-in cup holders are located on the armrests for convenience.
Image: A couple comfortably seated on the inflatable sofa, demonstrating its use for relaxation.
Converting to a Queen Size Air Bed
To convert the sofa into a queen-size air bed:
- Gently pull the front section of the sofa outwards. The sofa is designed to unfold into a flat mattress.
- Ensure the extended sections are fully deployed and lie flat.
- The resulting queen-size mattress is suitable for sleeping two people comfortably.
Image: The inflatable sofa transformed into a bed, with a couple lying on it, highlighting its comfort.
Image: A woman sleeping on the inflatable bed, demonstrating its convenience for overnight stays.
Using Cup Holders
Each armrest features a built-in cup holder. These are designed to hold standard-sized beverages securely while you are using the sofa or bed.
Image: A detailed view of the integrated cup holder on the armrest.
Maintenance
Cleaning
The Intex Inflatable Pull Out Sofa should be spot cleaned only. Use a mild soap and water solution with a soft cloth to clean soiled areas. Do not use harsh chemicals or abrasive cleaners, as these can damage the flocked surface and vinyl material. Allow the product to air dry completely before deflating or storing.
Storage
For optimal storage and transport:
- Ensure the product is clean and completely dry.
- Open all air valves and allow the air to escape fully. You may gently press on the product to expedite deflation.
- Once deflated, fold the sofa compactly. The product is designed to fold for easy storage or travel.
- Store in a cool, dry place, away from direct sunlight and extreme temperatures.
Image: A person carrying the deflated sofa in its carry bag, illustrating easy storage and transport.
Repairing Punctures
In the event of a small puncture, a repair patch kit (often sold separately or included with some Intex products) can be used. Clean the area around the puncture, apply the patch according to the kit's instructions, and allow sufficient drying time before re-inflating.
Troubleshooting
Product Not Holding Air
If the inflatable sofa is not holding air, consider the following:
- Valve Caps: Ensure all air valve caps are securely closed and properly seated.
- Punctures: Inspect the entire surface of the sofa for small holes or punctures. You can do this by inflating the sofa and applying a soapy water solution to the surface; bubbles will form where air is escaping.
- Seams: Check the seams for any signs of separation or damage.
- Internal Ribbing: In rare cases, internal ribbing may break, causing bulges or uneven inflation. This typically requires professional repair or replacement.
Specifications
| Feature | Detail |
|---|---|
| Product Type | 2 in 1 Inflatable Pull Out Sofa / Air Bed Mattress |
| Brand | Intex |
| Model Name | Inflatable Pull-Out Sofa |
| Sofa Dimensions (Inflated) | 80"L x 88"W x 26"H (Note: Product data states 40"L x 88"W x 26"H for sofa, and 80"L x 88"W x 26"H for bed. Using the 80"L for consistency with other data.) |
| Bed Dimensions (Inflated) | 80"L x 88"W x 26"H (Queen Size) |
| Color | Charcoal Gray |
| Material | Quality tested waterproof flocked top and sides with 15 gauge vinyl bottom |
| Special Features | Flocked surface, Inflatable, Built-in cup holders, Extra-wide air-valve openings |
| Weight Capacity | 440 Pounds (200 kg) |
| Item Weight | 40 pounds |
| Included Components | Carry Bag |
| Care Instructions | Spot Clean |
Sofa Size Icon
Mattress Size Icon
Weight Capacity Icon
Warranty and Support
For warranty information, product support, or to purchase replacement parts, please contact Intex customer service directly. Refer to the contact information provided with your product packaging or visit the official Intex website.
Website: www.intexcorp.com
