Introduction
This manual provides detailed instructions for the Phanteks Evolv X2 Mid-Tower Gaming Chassis. Please read this manual thoroughly before beginning installation to ensure proper setup and optimal performance of your system.
Image: Front-side view of the Phanteks Evolv X2 Mid-Tower Gaming Chassis, showcasing its tempered glass panels and internal structure.
Package Contents
Verify that all components are present before proceeding with installation:
- Phanteks Evolv X2 Chassis
- Accessory Box (screws, zip ties, manual)
- D-RGB Lighting Cables
- Additional mounting hardware
Setup and Installation
Follow these steps for proper installation of your components into the Phanteks Evolv X2 chassis.
1. Preparing the Chassis
Carefully remove the tempered glass panels. Refer to the accessory box for specific instructions on panel removal to prevent damage.
Image: Internal view of the Phanteks Evolv X2 chassis, showing the spacious layout for component installation.
2. Motherboard Installation
The Evolv X2 supports ATX, Micro ATX, and Mini ITX motherboards. Install standoffs as required for your motherboard form factor. Secure the motherboard using the provided screws.
This chassis also supports ATX rear-connect mainboards, which can simplify cable management by routing connections to the rear of the motherboard tray.
Image: Close-up of the motherboard tray within the Phanteks Evolv X2, highlighting mounting points and cable routing options.
3. Power Supply Installation
The power supply unit (PSU) is mounted at the front of the chassis. Secure the PSU using the provided screws.
4. Storage Drive Installation
Install your 2.5-inch and 3.5-inch storage drives into the designated bays. Refer to the accessory box for specific mounting hardware and locations.
5. Cooling System Configuration
The Evolv X2 features a vertical cooling system designed for optimal airflow. It supports:
- Bottom Intake: Triple 120mm fan positions for air intake.
- Top Exhaust: Triple 120mm fan positions with dedicated 360mm radiator clearance for exhaust.
- Rear Exhaust: One 120mm fan position.
Ensure fans are oriented correctly for intake and exhaust to maintain efficient airflow.
Image: View of the bottom fan mounting positions in the Phanteks Evolv X2, designed for air intake.
Image: Top view of the Phanteks Evolv X2, showing the fan and radiator mounting area for exhaust.
Image: Diagram illustrating the vertical airflow path within the Phanteks Evolv X2 chassis, with air entering from the bottom and exiting from the top.
6. Graphics Card Installation
Install your graphics card into the appropriate PCIe slot on your motherboard. Ensure it is securely fastened. The chassis provides ample space for high-end GPUs up to 380mm in length.
Image: Internal view of the Phanteks Evolv X2, showcasing a graphics card installed and integrated D-RGB lighting.
7. Cable Management
Utilize the cable routing channels and tie-down points behind the motherboard tray to organize cables. This improves airflow and aesthetics. The design supports ATX rear-connect mainboards for a cleaner setup.
Image: A fully assembled Phanteks Evolv X2 system demonstrating effective cable management and component layout.
8. D-RGB Lighting Connection
Connect the integrated D-RGB lighting cables to your motherboard's D-RGB header or a compatible D-RGB controller. Refer to your motherboard manual for specific D-RGB header locations.
Operating Instructions
Once all components are installed and connected, replace the tempered glass panels. Connect your peripherals and power cable, then power on your system.
The integrated D-RGB lighting can be controlled via compatible motherboard software or an external D-RGB controller, allowing for customization of lighting effects and colors.
Maintenance
Regular maintenance helps ensure the longevity and performance of your chassis and components.
- Dust Filters: Periodically clean the dust filters located at the intake points (e.g., bottom of the chassis) to maintain optimal airflow and prevent dust buildup inside the system.
- Tempered Glass Panels: Clean the tempered glass panels with a soft, lint-free cloth and a non-abrasive glass cleaner. Avoid harsh chemicals that may damage the glass or coatings.
- Interior Cleaning: Use compressed air to remove dust from internal components and fan blades. Ensure the system is powered off and unplugged before cleaning.
Troubleshooting
This section addresses common issues you might encounter.
- System Not Powering On:
- Verify all power cables are securely connected to the motherboard, graphics card, and power supply.
- Ensure the power supply switch is in the "ON" position.
- Check front panel header connections to the motherboard (Power SW, Reset SW).
- D-RGB Lighting Not Working:
- Confirm D-RGB cables are correctly connected to the motherboard's D-RGB header or a dedicated controller.
- Ensure D-RGB software (if applicable) is installed and configured correctly.
- Poor Airflow/High Temperatures:
- Check fan orientation; intake fans should draw air in, exhaust fans should push air out.
- Clean dust filters and internal components.
- Ensure no cables are obstructing airflow paths.
Specifications
| Feature | Detail |
|---|---|
| Brand | Phanteks |
| Model Name | Evolv X2 Silver White |
| Item Model Number | PH-ES524XTG_DMW01 |
| Case Type | Mid Tower |
| Motherboard Compatibility | ATX, Micro ATX, Mini ITX |
| Material | Steel Chassis, Aluminum panels, Tempered Glass Window, ABS plastic |
| Color | White |
| Item Weight | 32 pounds |
| Product Dimensions (LxWxH) | 17.87 x 8.97 x 23.15 inches |
| Number of USB 3.0 Ports | 2 |
| Cooling Method | Air, Water |
| Fan Size Support | 120 Millimeters |
| Power Supply Mounting Type | Front Mount |
Warranty Information
For detailed warranty information regarding your Phanteks Evolv X2 chassis, please refer to the official Phanteks website or the warranty card included with your product. Warranty terms and conditions may vary by region.
Support
If you require further assistance or have questions not covered in this manual, please visit the official Phanteks support website for FAQs, drivers, and contact information.
