SIMPLIHOME Warm Shaker 20-inch Solid Wood End Table Instruction Manual

Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your SIMPLIHOME Warm Shaker 20-inch Wide Rectangle Transitional End Table. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

Image: The SIMPLIHOME Warm Shaker 20-inch End Table, showcasing its distressed charcoal brown finish, single drawer, and open shelf.

Safety Information

This product may expose you to chemicals including formaldehyde, phthalates, and lead, which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov/furniture.

Always ensure all fasteners are securely tightened before use. Do not overload the table or its shelves. Keep small parts away from children during assembly.

Parts List

Please verify that all components are present before beginning assembly. If any parts are missing or damaged, contact customer support.

• Tabletop
• Side Panels (Legs)
• Bottom Shelf
• Drawer Components (Front, Back, Sides, Bottom)
• Drawer Glides
• Drawer Knob
• Assembly Hardware (Screws, Cam Locks, Dowels, Allen Key)

Setup and Assembly

Assembly is required for this end table. All necessary assembly tools are included. It is recommended that one person assemble this product.

Assembly Steps:

1. Unpack Components: Carefully remove all parts from the packaging. Lay them out on a soft, clean surface to prevent scratches.
2. Assemble Drawer: Follow the specific instructions provided in the packaging to assemble the drawer box using the drawer front, back, sides, and bottom panel. Attach the drawer glides to the drawer box.
3. Attach Drawer Glides to Side Panels: Secure the remaining drawer glides to the designated positions on the inner side panels of the table frame.
4. Assemble Frame: Connect the side panels and the bottom shelf using the provided hardware (e.g., cam locks and screws). Ensure all connections are snug.
5. Install Drawer: Carefully slide the assembled drawer into the installed drawer glides on the table frame.
6. Attach Tabletop: Place the tabletop onto the assembled frame and secure it using the appropriate fasteners.
7. Attach Drawer Knob: Fasten the brushed bronze knob to the drawer front.

Image: The assembled end table positioned next to a bed, demonstrating its use as a nightstand.

Assembly Video:

Video: An official product video from Simpli Home Ltd demonstrating the assembly process and features of the Warm Shaker End Table.

Operating Instructions

The SIMPLIHOME Warm Shaker End Table is designed for versatile use in living rooms, bedrooms, or other areas requiring compact storage and surface space.

• Using the Drawer: The table features one bottom drawer with smooth metal glides. To open, gently pull the brushed bronze knob. To close, push the drawer firmly until it is fully recessed.
• Using the Open Shelf: The open shelf below the tabletop is suitable for storing books, magazines, or displaying decorative items.
• Using the Tabletop: The top surface can hold lamps, beverages, remote controls, or other personal items. Ensure items are placed stably to prevent spills or falls.

Image: A close-up view of the end table with its drawer partially open, revealing the interior storage space.

Maintenance

To ensure the longevity and appearance of your SIMPLIHOME Warm Shaker End Table, follow these maintenance guidelines:

• Cleaning: Wipe clean with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the distressed charcoal brown finish and protective NC lacquer.
• Protection: Use coasters under beverages and placemats under hot items to prevent water rings and heat damage.
• Sunlight Exposure: Avoid prolonged exposure to direct sunlight, which can cause fading or discoloration of the wood finish.
• Humidity: Maintain a consistent humidity level in the room to prevent wood from warping or cracking.
• Tighten Hardware: Periodically check and tighten all screws and fasteners to ensure the table remains stable.

Image: A detailed view of the distressed charcoal brown finish, highlighting the natural wood grain.

Troubleshooting

If you encounter any issues with your end table, refer to the following common solutions:

• Wobbly Table: Check all leg and frame connections. Tighten any loose screws or cam locks. Ensure the table is on a flat, even surface.
• Drawer Sticks or Doesn't Close Smoothly: Verify that the drawer glides are properly aligned and free of obstructions. Ensure the drawer box was assembled correctly and is not warped.
• Scratches or Dents: Minor scratches can sometimes be touched up with a wood repair marker matching the distressed charcoal brown finish. For significant damage, professional repair may be necessary.
• Missing Hardware: If you discover missing hardware during assembly, please contact SIMPLIHOME customer support for replacement parts.

Specifications

Image: A technical diagram illustrating the precise dimensions of the Warm Shaker End Table, including overall height, width, depth, and internal drawer/shelf measurements.

Warranty Information

The product is warranted to be free from defects in material and workmanship for a period of one (1) year from the date of purchase to the original owner. This limited warranty covers manufacturing defects under normal use. It does not cover damage resulting from misuse, abuse, accidents, alterations, or normal wear and tear.

Customer Support

For assistance with assembly, missing parts, or warranty claims, please contact SIMPLIHOME customer support. Refer to the contact information provided with your product packaging or visit the official SIMPLIHOME website for support details.

You can also visit the SIMPLIHOME Store on Amazon for more product information and support resources.