1. Introduction
Thank you for choosing the Broan-NuTone SPK80L Bluetooth Speaker Ventilation Fan with LED Light. This innovative product combines efficient ventilation with a high-fidelity Bluetooth speaker and integrated LED lighting, designed to enhance comfort and air quality in your bathroom. This manual provides essential information for safe installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your unit.
2. Safety Information
Please read and understand all instructions before beginning installation or operation. Failure to follow these instructions may result in electric shock, fire, property damage, or personal injury.
- Always disconnect power at the service panel before wiring or servicing the unit.
- All wiring must be done by a qualified electrician in accordance with all applicable codes and standards, including fire-rated construction codes and standards.
- This unit is designed for general ventilating use only. Do not use to exhaust hazardous or explosive materials and vapors.
- To reduce the risk of fire or electrical shock, do not expose this unit to water or moisture.
- This product is UL listed for use over a bathtub or shower when connected to a GFCI-protected branch circuit (ceiling mount only).
3. Package Contents
Verify that all components are present before beginning installation:
- Ventilation Fan Housing
- Grille Assembly with Integrated LED Light and Bluetooth Speaker
- Installation Hardware
- User Manual
4. Specifications
| Feature | Specification |
|---|---|
| Model Number | SPK80L |
| Air Flow Capacity | 80 Cubic Feet Per Minute (CFM) |
| Noise Level | 2.5 Sones |
| Voltage | 120V |
| Wattage | 60 watts |
| Product Dimensions (D x W x H) | 10.25" x 9.75" x 8.13" |
| Duct Size | 4 inch round |
| Mounting Type | Ceiling Mount |
| Light Type | LED |
| Connectivity | Bluetooth |
| Material | Metal, Plastic |
| Certifications | Energy Star, FCC, UL, cUL |
5. Installation
This fan is designed for easy installation, fitting 2"x8" ceiling construction. A tapered, polymeric 4-inch round duct fitting ensures a positive duct connection without metallic clatter.
General Installation Steps:
- Prepare the Area: Ensure power is disconnected at the circuit breaker. Clear the installation area in the ceiling.
- Mount the Housing: Secure the fan housing to the ceiling joists. The housing dimensions are approximately 8.25" x 8" x 5.75".
- Connect Ductwork: Attach the 4-inch round duct to the fan's duct connector. Ensure a secure and airtight connection.
- Wire the Unit: Connect the electrical wiring according to local electrical codes. The unit requires 120V power.
- Install Grille Assembly: Once the housing is secured and wired, attach the grille assembly, ensuring it snaps firmly into place.
6. Operating Instructions
Fan and Light Operation:
The fan and LED light are typically controlled via a standard wall switch. Consult your electrician for specific wiring configurations if you desire separate control for the fan and light functions.
Bluetooth Speaker Operation:
The integrated Sensonic Bluetooth speaker allows you to stream audio wirelessly from any Bluetooth-enabled device.
Pairing Your Device:
- Ensure the fan unit has power. The Bluetooth speaker will automatically enter pairing mode when powered on.
- On your smartphone or other Bluetooth-enabled device, navigate to the Bluetooth settings.
- Look for a device named "FAN SPEAKER" (or similar, refer to your device's specific instructions if different).
- Select "FAN SPEAKER" to pair. Once paired, you will hear an audible confirmation tone from the speaker.
- You can now stream audio from your device to the fan's speaker.
The speaker does not require a specific application for functionality.
7. Maintenance
Regular cleaning and maintenance will ensure the long-term performance and efficiency of your ventilation fan.
Cleaning the Grille:
- Disconnect power to the fan at the service panel.
- Gently pull down the grille assembly from the ceiling. It is typically held by spring clips.
- Wipe the grille with a damp cloth using a mild, non-abrasive cleaning solution. Do not spray water directly onto the grille or electrical components.
- Allow the grille to dry completely before reattaching.
Cleaning the Fan Motor and Housing:
Periodically, the fan motor and housing may accumulate dust and debris. This should be cleaned by a qualified service person.
- Disconnect power to the fan at the service panel.
- Remove the grille assembly.
- Carefully vacuum or wipe away any dust from the fan blades and interior of the housing. Avoid touching electrical components.
- Reattach the grille assembly and restore power.
8. Troubleshooting
If your fan is not operating correctly, refer to the following troubleshooting guide:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not operate / Light does not turn on | No power to the unit; Loose wiring connection; Faulty switch. | Check circuit breaker/fuse. Ensure all wiring connections are secure. Test or replace the wall switch. |
| Fan operates, but air movement is low | Dirty fan blades or grille; Obstructed ductwork; Incorrect duct size. | Clean fan blades and grille. Check ductwork for obstructions or kinks. Ensure correct 4-inch duct is used. |
| Speaker not pairing or no sound | Bluetooth not enabled on device; Device too far from speaker; Speaker already paired to another device. | Ensure Bluetooth is on and device is within range. Disconnect from other devices. Re-attempt pairing. |
| Excessive noise from fan | Loose mounting screws; Fan blades hitting housing; Motor issues. | Check and tighten mounting screws. Inspect fan blades for damage. If noise persists, contact customer support. |
If the problem persists after attempting these solutions, please contact Broan-NuTone Customer Support.
9. Warranty Information
The Broan-NuTone SPK80L Bluetooth Speaker Ventilation Fan with LED Light is backed by a Three-Year Limited Warranty. This warranty covers defects in materials and workmanship under normal use and service. For full details regarding warranty coverage, terms, and conditions, please refer to the official warranty document included with your product or visit the Broan-NuTone website.
10. Support Information
For technical assistance, replacement parts, or further inquiries, please contact Broan-NuTone Customer Support:
- Website: Visit the official Broan-NuTone website for FAQs, product registration, and additional resources.
- Phone: Refer to the contact information provided on the product packaging or the official website for customer service phone numbers.
Please have your model number (SPK80L) and purchase date available when contacting support.
