XTUGA S400 Wireless Microphone System User Manual

Introduction

This user manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your XTUGA S400 4-Channel UHF Wireless Microphone System. Please read this manual thoroughly before using the product to ensure proper function and longevity.

The XTUGA S400 system is designed for clear and robust audio transmission, ideal for various applications including karaoke, church events, weddings, business meetings, and stage performances. It features a fixed UHF high-frequency design to minimize interference and offers a long transmission range.

Package Contents

Before proceeding with the setup, please ensure all components listed below are present in your package:

1 x Wireless Receiver Unit
4 x Handheld Wireless Microphones
1 x Power Adapter
1 x 1/4" (6.35mm) Mix Output Cable
4 x XLR Output Cables (optional, depending on package variant)
8 x AA Batteries (2 per microphone, may be included or sold separately)

XTUGA S400 Wireless Microphone System components: receiver and four handheld microphones

Image: Overview of the XTUGA S400 Wireless Microphone System, showing the main receiver unit and four handheld microphones.

Setup Guide

Receiver Placement: Place the receiver unit on a stable, flat surface, away from sources of electromagnetic interference (e.g., computers, Wi-Fi routers). Ensure adequate ventilation around the unit.
Image: Detailed view of the receiver's front panel with volume controls and power button, and the rear panel with power socket, antenna interfaces, balanced XLR outputs, and mixed 1/4" output.
Connect Antennas: Screw the two included antennas into the ANT-A and ANT-B ports on the rear of the receiver. Position them vertically for optimal signal reception.
Image: Close-up of the receiver's rear panel, highlighting the DC 12V power input, antenna connections (ANT-A, ANT-B), four balanced XLR outputs (BALANCED-A, B, C, D), and the MIX OUT 1/4" jack.
Power Connection: Connect the power adapter to the DC 12V input on the receiver's rear panel, then plug the adapter into a standard electrical outlet. Do not power on the unit yet.
Audio Output Connection:
- For individual microphone outputs, connect XLR cables from the BALANCED-A, B, C, D ports on the receiver to your mixer or amplifier's XLR inputs.
- For a combined output, connect a 1/4" (6.35mm) cable from the MIX OUT port on the receiver to your mixer or amplifier's 1/4" input.
Microphone Battery Installation: Unscrew the bottom cap of each handheld microphone. Insert two AA batteries into each microphone, ensuring correct polarity (+/-). Screw the cap back on securely.
Image: A single handheld microphone showing its power switch with ON, MUTE, and OFF positions, and a battery indicator light.

Operating Instructions

Power On the Receiver: Press the POWER button on the front panel of the receiver unit. The power indicator light will illuminate.
Power On Microphones: Slide the power switch on each handheld microphone to the "ON" position. The microphone's indicator light will turn on, and after a brief moment (approximately 2 seconds), it will establish a connection with the receiver.
Image: The receiver unit with antennas, illustrating the "Plug and Play" simplicity of the system, emphasizing fixed frequency and independent volume adjustment.
Adjust Volume: Use the individual volume control knobs (labeled 1, 2, 3, 4) on the receiver's front panel to adjust the output level for each corresponding microphone. Start with the volume low and gradually increase it to a comfortable listening level.
Microphone Usage: Hold the microphone approximately 2-6 inches from your mouth for optimal sound pickup. The system utilizes a cardioid dynamic microphone core, designed to pick up sound primarily from the front, reducing feedback and background noise.
Image: A detailed view of the microphone's internal high-sensitivity moving ring type wheat head, designed to prevent howling and ensure high fidelity.
Mute Function: To temporarily silence a microphone without turning it off, slide the microphone's power switch to the "MUTE" position. Slide it back to "ON" to resume audio.
Wireless Range: The system offers a long transmission range of up to 260 feet (approximately 80 meters) in open, unobstructed spaces. Performance may vary depending on environmental factors and obstacles.
Image: The XTUGA S400 system with four microphones and receiver, visually representing its UHF wireless transmission technology and a range of up to 262 feet in open areas.
Power Off: After use, first slide the power switch on each microphone to the "OFF" position. Then, press the POWER button on the receiver to turn it off. Disconnect the power adapter from the outlet.

Maintenance

Cleaning: Use a soft, dry cloth to clean the receiver and microphones. For stubborn dirt, a slightly damp cloth can be used, but ensure no liquid enters the devices. Do not use abrasive cleaners or solvents.
Battery Replacement: Replace microphone batteries when the battery indicator light dims or the audio quality degrades. Always use fresh AA batteries and dispose of old batteries responsibly.
Storage: When not in use for extended periods, remove batteries from the microphones to prevent leakage. Store the system in a cool, dry place, away from direct sunlight and extreme temperatures.

Troubleshooting

Problem	Possible Cause	Solution
No sound from microphones.	Microphone or receiver not powered on. Low or dead batteries in microphones. Volume knobs on receiver are too low. Audio cables not connected properly.	Ensure both receiver and microphones are powered on. Replace batteries in microphones. Increase volume on receiver and connected audio device. Check all audio cable connections.
Sound is distorted or intermittent.	Microphone too far from receiver. Interference from other electronic devices. Low microphone battery. Microphone not fully "locked in" to frequency (brief delay after power on).	Reduce distance between microphone and receiver. Move receiver away from potential interference sources. Replace microphone batteries. Wait a few seconds after turning on the microphone for it to stabilize.
Feedback (howling) sound.	Microphone too close to speakers. Volume too high.	Reposition microphone further from speakers. Lower the volume on the receiver or connected audio device. Ensure microphone is pointed away from speakers.

Technical Specifications

Feature	Specification
Model Name	S400
Brand	XTUGA
Microphone Form Factor	Handheld
Number of Channels	4
Frequency Range	500-580MHz (UHF Fixed Frequency)
Frequency Response	15 KHz
Signal-to-Noise Ratio	80 dB
Audio Sensitivity	80 dB
Noise Level	80 dB
Power Source (Microphones)	Battery Powered (2 AA batteries required per mic)
Material	Metal (Receiver and Microphones)
Connectivity Technology	XLR (Balanced Outputs), 1/4" (Mixed Output)
Item Dimensions (L x W x H)	3.54 x 22.05 x 13.39 inches
Item Weight	4.69 pounds
Polar Pattern	Unidirectional
Recommended Uses	Karaoke, Singing, Church, Events, Meetings

Warranty and Support

XTUGA products are manufactured with quality and reliability in mind. For specific warranty details regarding your S400 Wireless Microphone System, please refer to the warranty card included in your product packaging or visit the official XTUGA website.

If you encounter any issues or require technical assistance, please contact XTUGA customer support. You can often find support contact information on the official XTUGA website or through the retailer where you purchased the product.

For more information and product updates, you may visit the XTUGA Store on Amazon.

XTUGA S400