RecPro 24-inch Double Manual Foldaway RV Steps

1. Introduction

This manual provides essential information for the safe and effective installation, operation, and maintenance of your RecPro 24-inch Double Manual Foldaway RV Steps. Please read this manual thoroughly before using the product and retain it for future reference.

The RecPro RV Steps are designed for recreational vehicles, offering a convenient and secure entry and exit solution. These steps feature a manual foldaway design, eliminating the need for electrical connections. They are constructed from durable alloy steel with a black powder-coated finish for enhanced longevity and resistance to elements.

2. Safety Information

• Always ensure the steps are fully extended and locked into position before use.
• Verify the steps are securely retracted and latched before moving the RV.
• Do not exceed the maximum load capacity of 300 pounds.
• Exercise caution when using the steps in wet or icy conditions, despite the non-skid surface.
• Keep hands and feet clear of moving parts during extension and retraction.
• Regularly inspect the steps for any signs of damage or wear. Do not use if damaged.

3. Package Contents

• RecPro 24-inch Double Manual Foldaway RV Steps (1 unit)
• Installation Hardware (may vary, typically bolts for mounting)

Note: Additional tools for installation are not included.

4. Setup and Installation

The RecPro RV Steps are designed for either welding or bolting onto your RV frame. Bolting is a common method for installation.

4.1 Pre-Installation Check

• Ensure the mounting area on your RV frame is clean, structurally sound, and free from obstructions.
• Verify that the dimensions of the steps are compatible with your RV's entry point. Refer to the specifications section for detailed measurements.
• Gather necessary tools, which may include a drill, wrenches, and safety equipment.

4.2 Installation Steps (Bolting Method)

1. Position the step assembly against the RV frame at the desired entry point.
2. Mark the drilling locations through the pre-drilled holes on the step frame.
3. Drill pilot holes into the RV frame, ensuring proper alignment and depth.
4. Secure the step assembly to the RV frame using appropriate bolts, washers, and nuts. Tighten all fasteners to manufacturer specifications.
5. Test the steps for stability and proper operation before initial use.

Figure 1: Detailed dimensions of the RecPro 24-inch Double Manual Foldaway RV Steps.

Figure 2: Main product view of the RecPro 24-inch Double Manual Foldaway RV Steps.

5. Operating Instructions

The RecPro RV Steps are designed for simple, manual operation.

5.1 Extending the Steps

1. Locate the handle or release mechanism on the steps.
2. Grasp the handle and pull the steps outwards and downwards until they are fully extended and locked into place. Ensure both steps are stable and level.

Figure 3: Side view of the steps in a partially extended position.

5.2 Retracting the Steps

1. Grasp the handle or mechanism and lift the steps upwards and inwards.
2. Push the steps fully into their stored position beneath the RV until they latch securely.

Figure 4: The steps in their folded and stored position.

Figure 5: Side view of the steps in their folded position, showing the mounting bracket.

6. Maintenance

Regular maintenance will ensure the longevity and safe operation of your RV steps.

• Cleaning: Clean the steps regularly with mild soap and water. Avoid abrasive cleaners that could damage the powder-coated finish or non-skid surface.
• Lubrication: Periodically lubricate moving parts and pivot points with a silicone-based lubricant to ensure smooth operation and prevent corrosion.
• Inspection: Routinely check all bolts and fasteners for tightness. Inspect the steps for any cracks, bends, or excessive wear. Pay close attention to the non-skid surface for signs of deterioration.
• Powder Coat Finish: The black powder-coated finish is designed for durability. Minor scratches can be touched up with appropriate paint to prevent rust.

Figure 6: Close-up view of the non-skid surface on the steps.

7. Troubleshooting

If you encounter issues with your RecPro RV Steps, consider the following common solutions:

• Steps are stiff or difficult to operate: Apply lubricant to all pivot points and hinges. Check for any debris obstructing the mechanism.
• Steps do not latch securely: Inspect the latching mechanism for damage or obstructions. Ensure the steps are fully retracted.
• Excessive movement or wobbling: Check all mounting bolts for tightness. Ensure the RV is on a level surface.

If problems persist, contact RecPro customer support for assistance.

8. Specifications

9. Warranty and Support

For warranty information or technical support, please refer to the documentation provided with your purchase or contact RecPro directly through their official website or customer service channels.