AULCMEET N2QAYB000360 Replacement Remote Control User Manual

Introduction

This manual provides instructions for the AULCMEET N2QAYB000360 Replacement Remote Control. This remote control is designed to be compatible with various Panasonic DVD systems, including models such as SC-PT464, SA-PT464, SB-HW460, SC-PT170, SA-PT170, SC-PT570, SC-PT870, SB-HF470, SB-HC470, and SB-HS470.

Image of the AULCMEET N2QAYB000360 replacement remote control, showing its layout and buttons.

Setup

Battery Installation

The remote control requires two AAA batteries (not included) for operation. Follow these steps to install the batteries:

1. Locate the battery compartment cover on the back of the remote control.
2. Slide the battery compartment cover downwards or press the latch and lift to open it.
3. Insert two new AAA alkaline batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
4. Replace the battery compartment cover by sliding it back into place until it clicks securely.

Initial Use

After installing the batteries, the remote control is ready for use. No programming is required. Simply point the remote control towards the infrared (IR) sensor on your Panasonic DVD system.

Operating Instructions

This replacement remote control functions identically to the original Panasonic remote. Ensure a clear line of sight between the remote control and the IR sensor on your DVD system for optimal performance.

• Power Button: Press to turn the DVD system on or off.
• Playback Controls: Use buttons like Play, Pause, Stop, Fast Forward, and Rewind for media playback.
• Navigation Buttons: Use the directional arrows (Up, Down, Left, Right) and Enter/OK button to navigate menus.
• Volume Controls: Adjust the volume of your audio output.
• Number Pad: Select specific tracks or input numbers as required by your DVD system.

Maintenance

• Cleaning: Wipe the remote control with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
• Battery Replacement: Replace batteries promptly when the remote control's response becomes sluggish or stops working. Always replace both batteries at the same time with new ones.
• Storage: If the remote control will not be used for an extended period, remove the batteries to prevent leakage.
• Environment: Avoid exposing the remote control to extreme temperatures, direct sunlight, or high humidity.

Troubleshooting

• Remote not responding:
  • Ensure there is a clear line of sight between the remote and the DVD system's IR sensor.
  • Check if the batteries are installed correctly with the correct polarity.
  • Replace the batteries with new ones.
  • Verify that the DVD system is powered on.
• Weak signal:
  • Move closer to the DVD system.
  • Ensure no objects are blocking the signal path.
  • Replace batteries if they are low.

Specifications

Support

For further assistance or if you encounter issues not covered in this manual, please contact AULCMEET customer support. Refer to your product packaging or the retailer's website for specific contact details.