Fellowes LX210 P-4 Micro-Cut Paper Shredder

Introduction

The Fellowes LX210 P-4 Micro-Cut Paper Shredder is designed for efficient and secure document destruction in office environments. Featuring 100% Jam Proof technology, it automatically detects and powers through tough jobs, preventing jams. The integrated SafeSense Technology enhances user safety by stopping shredding when hands or paws touch the paper entry. This heavy-duty shredder can process up to 16 sheets per pass, transforming them into 5/32" x 1/2" micro-cut particles for P-4 level security. It is capable of shredding staples, paper clips, plastic credit cards, and unopened junk mail. The LX210 offers continuous shredding for up to 20 minutes, followed by a 15-minute cool-down period, allowing for substantial shredding tasks to be completed in one session.

Image: The Fellowes LX210 P-4 Micro-Cut Paper Shredder, a sleek black unit with casters, designed for office use.

Important Safety Information

Please read all instructions carefully before using the shredder. Keep this manual for future reference.

• Keep hands, hair, loose clothing, ties, and jewelry away from the paper entry slot.
• Keep children and pets away from the shredder at all times.
• Unplug the shredder when not in use or before moving, cleaning, or emptying the waste bin.
• Do not use aerosol products near the shredder.
• Do not shred adhesive labels or materials that are not specified for shredding.
• Do not attempt to open or repair the shredder yourself. Refer all servicing to qualified service personnel.
• This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Image: A hand approaching the shredder's paper entry, illustrating the SafeSense Technology which automatically stops shredding for safety.

Product Features

• 100% Jam Proof System: Automatically detects and powers through tough jobs to prevent jams.
• Optimal Shredding: Shreds up to 16 pages per pass, including staples, paper clips, credit cards, and junk mail.
• SafeSense Protection: Patented technology stops shredding when hands or paws touch the paper entry.
• Efficiency Meter: Indicates the ideal number of sheets for optimal shredding performance.
• Bin Full Indicator: Alerts you when the waste bin is nearly full and needs to be emptied.
• Micro-Cut Security (P-4): Shreds documents into tiny 5/32" x 1/2" particles for enhanced security and less frequent bin emptying.
• Extended Run Time: Operates continuously for up to 20 minutes.

Image: An illustration of the shredder's internal mechanism, highlighting its 100% Jam Proof technology preventing paper jams.

Image: A close-up of the shredder's control panel, showing the Intellibar with indicators for run time, efficiency, and bin full status.

Image: A hand holding micro-cut paper particles, next to a shield indicating P-4 security level.

Setup

1. Unpack the Shredder: Carefully remove the shredder from its packaging. Ensure all components are present and undamaged.
2. Position the Shredder: Place the shredder on a flat, stable surface near a power outlet. Ensure there is adequate space around the unit for ventilation and bin removal.
3. Install the Waste Bin: Slide the waste bin securely into the shredder cabinet. Ensure it is fully seated to allow the shredder to operate.
4. Connect to Power: Plug the power cord into a grounded electrical outlet.

Image: The Fellowes LX210 shredder with key specifications overlaid, including 16 sheet capacity, 6-gallon bin, and 20 minutes non-stop shred time.

Operating Instructions

1. Power On: Ensure the shredder is plugged in and the power switch is in the 'ON' position. The Intellibar will illuminate.
2. Prepare Documents: Remove any large clips or binders. The shredder can handle small staples and paper clips.
3. Feed Paper: Insert paper squarely into the paper entry slot. The shredder will automatically start shredding. Observe the Efficiency Meter on the Intellibar to optimize the number of sheets fed.
4. Shredding Other Materials: For credit cards, insert one card at a time into the designated slot (if applicable, typically the main paper entry for this model).
5. Continuous Operation: The shredder can operate for up to 20 minutes continuously. If the run time indicator on the Intellibar shows the shredder is nearing its limit, allow it to cool down for 15 minutes before resuming operation.
6. Bin Full: When the bin full indicator illuminates, empty the waste bin.

Image: A man sitting at a desk, feeding paper into the Fellowes LX210 shredder positioned beside him.

Image: A close-up view of paper being fed into the shredder's slot, with a green light indicating readiness for shredding.

Maintenance

1. Emptying the Waste Bin: Regularly check the bin full indicator. When illuminated, pull out the waste bin and dispose of the shredded material. Reinsert the bin securely.
2. Oiling the Shredder: To maintain optimal performance and extend the life of your shredder, it is recommended to oil the cutting blades regularly. Use Fellowes shredder oil or lubricant sheets. Follow the instructions provided with the lubricant.
3. Cleaning: Unplug the shredder before cleaning. Wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents.

Image: A close-up of the shredder's bin, showing the bin full indicator light illuminated in red.

Image: Packaging for Fellowes PowerShred Performance Lubricant Sheets, recommended for shredder maintenance.

Troubleshooting

Specifications

Warranty and Support

Fellowes products are designed and manufactured to the highest quality standards. For specific warranty details regarding your LX210 shredder, please refer to the warranty card included with your product or visit the official Fellowes website.

For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Fellowes Customer Service. You can also find additional resources and product information by visiting the Fellowes Brand Store on Amazon.