Introduction
This manual provides instructions for the VTech VS112-4 DECT Bluetooth 4 Handset Cordless Phone system. This system features Bluetooth Connect to Cell technology, a Smart Call Blocker, and a digital answering system. It allows users to manage both cellular and landline calls from a single home phone system.
Package Contents
Ensure all items are present in your package:
- Main base unit with digital answering system
- Four cordless handsets
- Four handset chargers
- Four power adapters for chargers
- One power adapter for base unit
- One telephone line cord
- Four rechargeable batteries for handsets
Image: The VTech VS112-4 cordless phone system, showing the main base unit and four handsets on their charging cradles.
Setup
1. Battery Installation
- Open the battery compartment cover on the back of each handset.
- Connect the battery connector securely into the jack inside the compartment.
- Place the battery into the compartment.
- Close the battery compartment cover.
- Place each handset in its respective charger to charge for at least 16 hours before initial use.
2. Base Unit Connection
- Plug the small end of the base unit power adapter into the power jack on the back of the base unit.
- Plug the large end of the power adapter into a standard electrical outlet.
- Plug one end of the telephone line cord into the TEL LINE jack on the back of the base unit.
- Plug the other end of the telephone line cord into a telephone wall jack.
3. Charger Connection
- Plug the small end of each charger power adapter into the power jack on the back of each charger.
- Plug the large end of each power adapter into a standard electrical outlet.
Operating Instructions
Connect to Cell Feature
The Connect to Cell feature allows you to make and receive cellular calls using your VTech cordless handsets. You can pair up to two cell phones or one cell phone and one Bluetooth headset.
- Pairing a Cell Phone:
- On the base unit, press and hold CELL until the CELL 1 or CELL 2 indicator flashes.
- Enable Bluetooth on your cell phone and search for devices.
- Select "VTech VS112-4" from the list of available devices.
- Confirm the pairing on both devices if prompted.
- Making a Cell Call:
- On a handset, press CELL, then dial the number.
- Press TALK to initiate the call.
- Receiving a Cell Call:
- When a cell call comes in, the handset will ring and display "Cell Call".
- Press TALK to answer.
Image: This image illustrates the 'Connect to Cell' feature, showing a VTech cordless phone base unit wirelessly connected to two smartphones, enabling calls to be made and received through the cordless handsets.
Smart Call Blocker
The Smart Call Blocker helps filter unwanted calls, including robocalls. You can block up to 1,000 numbers.
- Blocking a Number: During a call or after reviewing Caller ID history, press the CALL BLOCK button on the handset or base unit. Follow the prompts to add the number to the block list.
- Screening Robocalls: Set the system to ask callers to press the pound key. Robocalls typically cannot complete this action and will be blocked.
- Screening Unknown Callers: Configure the system to ask unknown callers to state their name. The system will announce the name, allowing you to decide whether to answer or block the call.
Image: A close-up view of the VTech phone's keypad, emphasizing the "CALL BLOCK" button and illustrating the one-touch blocking functionality. A table explains how the Smart Call Blocker handles different call types.
Image: A VTech handset displaying a call block directory, indicating the ability to manage up to 1,000 blocked numbers.
Digital Answering System
The integrated digital answering system records up to 22 minutes of messages, announcements, and memos. A voice guide assists with setup.
- Playing Messages: Press PLAY/STOP on the base unit or handset.
- Recording an Announcement: Follow the voice guide prompts to record your outgoing message.
- LED Message Counter: The base unit features an LED display indicating the number of new messages.
Image: The VTech phone base unit, highlighting the digital answering system controls and the LED message counter, with a speech bubble indicating a recorded message.
Intercom
Use the intercom feature to communicate between handsets.
- Press INTERCOM on a handset.
- Select the desired handset number to call.
- The receiving handset will ring. Press TALK to answer the intercom call.
Image: A VTech handset with an icon indicating the handset-to-handset intercom feature.
Speakerphone
Each handset includes a full-duplex speakerphone for hands-free conversations.
- During a call, press SPEAKER to activate the speakerphone.
- Press SPEAKER again to switch back to the earpiece.
Image: A VTech handset with a speakerphone icon, indicating the hands-free calling capability.
Image: A woman using the VTech cordless phone's speakerphone feature while preparing food in a kitchen, demonstrating hands-free communication.
Volume Adjustment
Adjust the listening volume during a call using the VOLUME buttons on the side of the handset or the VOL +/- buttons on the base unit.
Image: A VTech handset and base unit, with circles highlighting the volume control buttons on both devices for easy adjustment of call volume.
Caller ID and Call Waiting
The system stores up to 50 name and number caller ID entries.
- When a call comes in, the caller's information will display on the handset screen.
- During an active call, if another call comes in, you will hear a call waiting tone. Press FLASH to switch to the incoming call.
Image: A VTech handset screen displaying caller ID information, indicating the phone's ability to show incoming call details.
Visual Ringer
The handset features a visual ringer, a light on top that flashes during an incoming call. This is useful in noisy environments or for users with hearing impairments.
Image: A close-up of the VTech handset's top, showing the visual ringer light flashing to indicate an incoming call.
Large Screen and Keypad
The handsets feature a large 2-inch screen with high-contrast text and an enlarged, lighted keypad for improved readability and ease of dialing, especially in low-light conditions.
Image: A close-up of the VTech handset, highlighting its large 2-inch screen with high-contrast text and the enlarged, lighted keypad for easy readability and dialing.
Maintenance
- Cleaning: Wipe the phone and base unit with a soft, damp cloth. Do not use cleaning sprays or harsh chemicals.
- Battery Care: Replace batteries when they no longer hold a charge. Use only the specified rechargeable batteries.
- Environmental Conditions: Avoid placing the phone in direct sunlight, near heat sources, or in areas with high humidity.
Troubleshooting
| Problem | Solution |
|---|---|
| No dial tone | Ensure the base unit power adapter and telephone line cord are securely connected. Test with another phone if possible. |
| Handset not charging | Ensure the handset is correctly seated in the charger. Verify the charger's power adapter is plugged in. Clean charging contacts. |
| Cannot make/receive cell calls | Check if your cell phone is paired and within range of the base unit. Ensure Bluetooth is enabled on your cell phone. |
| Poor audio quality | Move closer to the base unit. Check for interference from other electronic devices. Ensure the telephone line cord is not damaged. |
| Answering system not recording | Check if the answering system is turned on. Ensure there is sufficient recording time available. |
Specifications
- Model: VS112-4
- Brand: VTech
- Telephone Type: Cordless DECT 6.0
- Number of Handsets: 4
- Connect to Cell: Yes, Bluetooth enabled (pair up to 2 cell phones or 1 cell phone + 1 Bluetooth headset)
- Smart Call Blocker: Yes, blocks up to 1,000 numbers
- Answering System: Digital, up to 22 minutes recording time
- Display: 2-inch high-contrast LCD with white backlight
- Keypad: Enlarged, lighted keypad
- Speakerphone: Full-duplex on handset
- Caller ID Memory: 50 name/number entries
- Intercom: Handset-to-handset
- Power Source: Corded Electric (for base and chargers)
- Batteries: 4 x Product Specific rechargeable batteries (included)
- Color: Silver & Black
- Dimensions (Base Unit): Approximately 15.1 x 8.5 x 18.7 cm
- Item Weight: Approximately 3.03 Pounds (total system)
Warranty and Support
For warranty information and technical support, please refer to the warranty card included with your product or visit the official VTech website. Keep your purchase receipt as proof of purchase.
Online Support: www.vtechphones.com