Nordlux SPONGE TO GO Outdoor Lamp User Manual

Introduction

Thank you for choosing the Nordlux SPONGE TO GO outdoor lamp. This portable lamp, designed by Says Who, combines modern aesthetics with practical functionality, making it ideal for various outdoor settings. This manual provides essential information for the safe and efficient use of your lamp.

Safety Instructions

• Read all instructions carefully before first use.
• This product is designed for outdoor use but should be protected from extreme weather conditions.
• Do not immerse the lamp in water.
• Keep out of reach of children and pets.
• Use only the provided charging cable or a compatible USB cable.
• Do not attempt to open or repair the lamp yourself. Refer to qualified service personnel.
• Ensure the charging port is dry before connecting the USB cable.

Package Contents

Please check that all items are present in the package:

• Nordlux SPONGE TO GO Outdoor Lamp (1 unit)
• USB Charging Cable (1 unit)
• Integrated Lithium-ion Batteries (2 units)

Setup

Initial Charging

Before first use, fully charge the lamp. Locate the USB charging port on the base of the lamp. Connect the provided USB cable to the lamp and to a suitable USB power adapter (not included). The charging indicator light (if present) will show the charging status. A full charge typically takes several hours.

Figure 1: Close-up of the lamp base with power button and charging port.

Operating Instructions

Powering On/Off

Press the power button located on the base of the lamp to turn it on. Press it again to turn it off.

Adjusting Brightness (MOODMAKER™ Step Dimming)

The SPONGE TO GO lamp features MOODMAKER™ Step Dimming, allowing you to adjust the light brightness through three levels. Each press of the power button cycles through the brightness settings:

• First Press: 100% Brightness (approx. 5 hours battery life)
• Second Press: 60% Brightness (approx. 10 hours battery life)
• Third Press: 30% Brightness (approx. 16 hours battery life)
• Fourth Press: Turns the lamp off.

Figure 2: MOODMAKER™ Step Dimming functionality.

Figure 3: Nordlux SPONGE TO GO lamp in its standard upright position.

Maintenance

Cleaning

To clean the lamp, wipe it with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these may damage the finish. Ensure the lamp is turned off and unplugged before cleaning.

Battery Care

To prolong battery life, avoid fully discharging the lamp frequently. Recharge the lamp when the light output becomes noticeably dim. If storing the lamp for an extended period, charge it to approximately 50% and recharge every few months.

Troubleshooting

Specifications

Figure 4: Nordlux SPONGE TO GO lamps illuminating an outdoor space.

Recycling and Disposal

Proper disposal of electrical and electronic equipment is important for environmental protection. This product contains batteries and electronic components that should not be disposed of with household waste.

Bulb Recycling

Please refer to local regulations for the recycling of light bulbs and integrated LED components. Many municipalities offer collection points for electronic waste.

Information on Broken Bulbs and Cleaning

In the event of a broken lamp or bulb, exercise caution. Avoid direct contact with broken glass. For cleaning, use gloves and dispose of broken pieces safely according to local waste disposal guidelines. Do not use a vacuum cleaner to clean up broken glass.

Warranty and Support

Nordlux products are manufactured to high-quality standards. For information regarding warranty terms and conditions, please refer to the warranty card included with your purchase or visit the official Nordlux website. For technical support or service inquiries, please contact your retailer or Nordlux customer service.

You can find more information and contact details on the official Nordlux website: www.nordlux.com