1. Introduction
This user manual provides detailed instructions for the installation, operation, and maintenance of your TREATLIFE Smart Ceiling Fan Control and Dimmer Light Switch. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.
2. Important Safety Information
WARNING: RISK OF ELECTRIC SHOCK. Improper installation can be dangerous or illegal. Always consult a qualified electrician if you are unsure about any part of the installation process.
- This device supports 2.4GHz Wi-Fi only (5GHz is not supported). No hub is needed for operation.
- Installation requires neutral, fan load, light load, line, and ground wires. Ensure two separate load wires are available for the fan and light.
- This switch only works with single-pole setups. It is not compatible with 3-way or multiple-way circuits.
- Only use with dimmable, non-smart bulbs. Maximum load is 150W for LED/CFL bulbs and 300W for incandescent bulbs. Not compatible with smart or non-dimmable bulbs.
- Supports 4-speed AC fans up to 1.5A. Not suitable for fans with remote controls, smart fans, DC motors, or exhaust fans.
- Remove any installed canopy modules from the fan before installation of this switch.
- Switch dimensions: 4.13" (L) x 1.73" (W) x 1.38" (D).
3. Package Contents
- 1 x TREATLIFE Smart Ceiling Fan Control and Dimmer Light Switch
- 1 x 1-Gang Wallplate
- 2 x Screws
- 4 x Screw Nuts
4. Specifications
| Feature | Specification |
|---|---|
| Model Number | DS03-1 |
| Operation Mode | ON-OFF-ON |
| Current Rating | 1.5 Amps |
| Operating Voltage | 120 Volts (AC) |
| Contact Type | Normally Closed |
| Connector Type | Screw |
| Terminal | Spst |
| Product Dimensions | 1.97 x 3.54 x 5.12 inches |
| Circuit Type | 1-way |
| Actuator Type | Push Button |
| Contact Material | Metal |
| International Protection Rating | IP00 |
| Number of Positions | 1 |
| Upper Temperature Rating | 50 Degrees Celsius |
| Controller Type | Alexa, Google Home, SmartThings, Remote Control |
| Control Method | App, Touch, Voice |
| Connectivity Protocol | Treatlife APP, Wi-Fi, SmartThings |
| Color | White |
| Wattage | 300W (Incandescent), 150W (LED/CFL) |
| Item Weight | 7.8 ounces |
| Country of Origin | China |
| Type of Bulb | LED (Dimmable, Non-Smart) |
| UPC | 795890921008 |
5. Installation and Setup
5.1 Wiring and Compatibility
Before beginning installation, ensure the power is turned off at the circuit breaker. This smart switch requires specific wiring and is compatible with certain types of fans and bulbs.
Image: Wiring, Pairing, and Applications Compatibility
Wiring Requirements:
- Supports 2.4GHz Wi-Fi only (5GHz not supported).
- No hub needed.
- Requires neutral, fan load, light load, line, and ground wires.
- Ensure two separate load wires for fan and light.
- Only works with single-pole setups, not 3-way or multiple ways.
Image: Bulbs and Fans Compatibility
Bulb and Fan Compatibility:
- Only works with dimmable, non-smart bulbs (max 150W for LED/CFL, 300W for incandescent).
- Not compatible with smart or non-dimmable bulbs.
- Supports 4-speed AC fans up to 1.5A.
- Not for fans with remote, smart fans, DC motors, or exhaust fans.
- Remove canopy modules before installation.
5.2 Basic Wiring Guide
Follow this guide for connecting the switch. If you are unsure, consult a qualified electrician.
Image: Basic Wiring Diagram for TREATLIFE Smart Ceiling Fan Control and Dimmer Light Switch
Wire Definitions:
Neutral: Usually a bundle of white wires.
Ground: Usually a green or bare copper wire.
Line: Usually black. One end is connected to the circuit breaker, the other to your old switch.
Load: Usually black or red. One end is connected to the switch, the other to your electrical device.
5.3 App Setup and Pairing
The TREATLIFE Smart Ceiling Fan Control and Dimmer Light Switch connects to your home Wi-Fi network via the Smart Life or Treatlife App. Ensure your phone is connected to a 2.4GHz Wi-Fi network during the pairing process.
- Download the Smart Life or Treatlife App from your mobile device's app store.
- Register or log in to your account.
- Follow the in-app instructions to add the device. If standard pairing modes fail, try the 'AP Mode' as an alternative.
Image: Controlling the Smart Switch Remotely via the Treatlife App
6. Operating Instructions
6.1 Manual Control
The physical switch allows for direct control of your fan and light.
Image: Physical interaction with the TREATLIFE Smart Ceiling Fan Control and Dimmer Light Switch
Use the dedicated buttons on the switch to:
- Adjust light brightness (dimming from 10% to 100%).
- Control fan speed (4-speed settings).
- Turn the light and fan on/off.
6.2 App Control
Control your fan and light from anywhere using the Smart Life or Treatlife App.
- Adjust fan speed and light brightness remotely.
- Set timers or schedules for automated operation.
- Utilize 'Away Mode' for enhanced home security by activating random lighting.
- Share device control with family members.
6.3 Voice Control
Integrate your smart switch with voice assistants for hands-free control.
Image: Voice control integration with Amazon Alexa and Google Assistant
The switch works with Amazon Alexa and Google Assistant (Note: Not compatible with Apple HomeKit). Simply use voice commands to adjust light brightness or fan speed.
6.4 Scheduling and Timers
Automate your lighting and fan operation to suit your daily routine.
Image: Setting timers and schedules for automated fan and lighting control
Set specific times for your lights and fans to turn on/off with preset brightness or speed levels. This feature can also be used to activate random lighting for enhanced home security when you are away.
7. Maintenance
To maintain your TREATLIFE Smart Ceiling Fan Control and Dimmer Light Switch, ensure the power is off before cleaning. Use a soft, damp cloth to wipe the surface. Avoid using harsh chemicals or abrasive cleaners.
8. Troubleshooting
- Switch not responding: Ensure the circuit breaker is on and the switch is properly wired. Verify that the neutral wire is connected.
- Cannot connect to Wi-Fi: Ensure your Wi-Fi network is 2.4GHz. 5GHz networks are not supported. Try moving closer to your router or restarting the pairing process using 'AP Mode' if available in the app.
- Light or fan not working: Check bulb compatibility (must be dimmable, non-smart). Ensure fan is an AC type and does not have a remote control or DC motor. Verify that separate load wires for the fan and light are correctly connected.
- Fan speed or light dimming issues: Confirm that the fan is a 4-speed AC fan and bulbs are dimmable. Ensure no canopy modules are installed on the fan.
- Voice control issues: Ensure the switch is correctly linked to your Alexa or Google Assistant account. Note that the fan and light may appear as separate devices in the voice assistant app, requiring individual naming.
- Physical fit in electrical box: The switch may be larger than standard switches. If space is limited, consider a deeper electrical box or a larger gang box.
- Scheduling not working: Check the app for any 'activate/deactivate' toggles for scheduled tasks, as these may sometimes turn off automatically.
9. Warranty and Support
TREATLIFE FCC-certified ceiling fan wall controls are designed for safety and quality assurance. The product comes with a 2-year warranty.
For any unexpected quality or installation issues, please contact TREATLIFE customer support to activate your warranty service and receive the best solution.
You can find more information and support on the official TREATLIFE website or through the contact information provided in the product packaging.
