1. Introduction
Thank you for choosing the Hunter Bennett Ceiling Fan. This manual provides essential information for the safe installation, operation, and maintenance of your new ceiling fan. The Bennett fan, model 50418, features a matte white finish, a 44-inch span, an integrated LED light kit, and a convenient handheld remote control. Its transitional design and reversible blades make it a versatile addition to any indoor space, ensuring optimal air movement and customizable lighting.
2. Safety Information
Please read and understand all instructions before beginning installation. Improper installation can lead to electric shock, fire, or personal injury. Always disconnect power at the main circuit breaker before working on the fan. Ensure all electrical connections comply with local codes and ordinances. If you are unsure about any part of the installation, consult a qualified electrician. Do not operate the fan with damaged parts. Keep children and pets away from the fan during operation.
3. Package Contents
Verify that all components listed below are included in your package:
- Fan Motor Assembly
- Fan Blades (5)
- Light Kit with LED Bulbs
- Glass Shades (3)
- Downrods (3-inch and 2-inch)
- Canopy and Mounting Bracket
- Handheld Remote Control with Battery
- Wall Cradle for Remote
- Hardware Pack (screws, washers, wire nuts)
Figure 3.1: Overview of the Hunter Bennett 44-inch Ceiling Fan, highlighting its reversible blades.
4. Setup and Installation
Installation of the Hunter Bennett Ceiling Fan requires basic electrical knowledge. For detailed, step-by-step instructions, please refer to the dedicated Installation Manual included with your product. Key installation features include:
- Mounting System: The fan supports a three-position mounting system, allowing for standard, low, or angled installation to suit various ceiling types and heights.
- Downrods: Both 3-inch and 2-inch downrods are provided to ensure optimal distance from the ceiling and maximize air movement efficiency.
- Blade Attachment: Securely attach the five fan blades to the motor housing. Ensure all screws are tightened to prevent wobbling.
- Light Kit Assembly: Install the LED light kit and attach the clear glass shades.
Figure 4.1: Detailed view of the fan blade attachment mechanism.
Figure 4.2: Close-up of the integrated LED light kit with clear glass shades.
Figure 4.3: View of the fan's motor housing and central assembly.
5. Operating Instructions
Your Hunter Bennett Ceiling Fan is operated using the included handheld remote control. Ensure the remote's battery is properly installed.
Remote Control Functions:
- Power Button: Turns the fan and light on/off.
- Fan Speed Control: Use the up/down arrows to adjust fan speed (multiple settings available).
- Light Dimming: Press and hold the light button to dim or brighten the LED light.
- Fan Direction (Reversible Motor): A switch on the fan motor housing allows you to change the direction of blade rotation. Set to downdraft mode for cooling in summer and updraft mode for circulating warm air in winter.
Figure 5.1: The handheld remote control for the Hunter Bennett Ceiling Fan, showing buttons for light dimming and fan speed/direction.
Figure 5.2: Close-up of a single fan blade in matte white finish.
Figure 5.3: The Hunter Bennett Ceiling Fan showcasing the reversible light wood-grain blade side.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your ceiling fan.
- Cleaning: To clean the fan, wipe with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or electrical components.
- Blade Cleaning: Dust the fan blades regularly to maintain air circulation efficiency.
- Light Bulb Replacement: The fan uses long-lasting LED bulbs. If replacement is ever needed, ensure power is off and use only compatible LED bulbs as specified by Hunter.
- Tighten Screws: Periodically check and tighten all screws on the fan blades and mounting hardware to prevent wobbling and ensure safe operation.
7. Troubleshooting
If you experience issues with your Hunter Bennett Ceiling Fan, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not turn on | No power to the fan; Loose wire connections; Remote control battery dead. | Check circuit breaker; Verify all wire connections are secure; Replace remote control battery. |
| Light does not work | Loose wire connection to light kit; Faulty LED bulb; Remote control issue. | Check light kit wiring; Replace LED bulb if necessary; Ensure remote is paired and functioning. |
| Fan wobbles | Loose blade screws; Unbalanced blades; Loose mounting bracket. | Tighten all blade screws; Use balancing kit (not included) if needed; Secure mounting bracket. |
| Remote control not responding | Dead battery; Remote not paired; Obstruction between remote and receiver. | Replace battery; Refer to installation manual for remote pairing instructions; Ensure clear line of sight. |
8. Specifications
Detailed specifications for the Hunter Bennett Ceiling Fan, Model 50418:
- Brand: Hunter
- Model Name: Bennett
- Part Number: 50418
- Color: Matte White Finish
- Product Dimensions: 44"D x 44"W x 19.95"H
- Item Weight: 19.62 Pounds
- Power Source: Electric
- Voltage: 120 Volts
- Wattage: 4 watts (for light)
- Light Type: LED
- Luminous Flux: 1050 Lumen
- Color Temperature: 2700 Kelvin
- Control Method: Remote
- Indoor/Outdoor Usage: Indoor
- UPC: 049694504180
9. Warranty and Support
Warranty: The Hunter Bennett Ceiling Fan comes with a limited lifetime motor warranty, backed by Hunter Fan Company's over 130 years of experience in the fan business. This warranty covers defects in materials and workmanship of the fan motor for the lifetime of the original purchaser.
Support: For technical assistance, replacement parts, or warranty claims, please contact Hunter Fan Company customer support. Refer to the contact information provided in your product packaging or visit the official Hunter Fan Company website for the most up-to-date support resources.
Note: Proof of purchase may be required for warranty service.
